Trustpilot

High Quality Products All In One Place

Check Out Our New Training Academy

Apply for a Credit Account

Get an Instant Solar Quote Here

Looking for Training?

Register for a Trade Account

Schletter Mounting

67 products

  • Seam clamp 503 Rapid for standing seam roof

    Schletter Seam clamp 503 Rapid for standing seam roof

    Part No: SLT-112001-005 Mounting - Roof Anchor- Seam Clamps Seam clamp 503 Rapid for standing seam roof Please note: In case of roofs made of titanium zinc sheet metal, please verify that the standing seams have sufficient load-bearing capacity! Keywords: SLT112001000, Schletter, PV Mounting, Roof Anchor- Seam Clamp Screws: stainless steel Seal: EPDM Screws must be ordered separately as needed (2 pieces for each ClampFit) Please note typically this system will use 4 fixing points per module. At high wind or snow loads or with large modules it can might be required to use more fixing points.

    Read more

    £3.43 Exc. VAT

    £4.12 Inc. VAT

  • Mid Clamp Rapid16 30-40mm Black

    Schletter Mid Clamp Rapid16 30-40mm Black

    Part No: SLT-131121-901 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping).

    Read more

    £2.05 Exc. VAT

    £2.46 Inc. VAT

  • End Clamp Rapid16 30-40mm Black

    Schletter End Clamp Rapid16 30-40mm Black

    Part No: SLT-131101-901 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.

    Read more

    £2.05 Exc. VAT

    £2.46 Inc. VAT

  • FixZ-15 system profile18 upper 4400 mm

    Schletter FixZ-15 system profile18 upper 4400 mm

    Part No: SLT-121008-04400 Mounting - Mounting Rails

    Read more

    £185.76 Exc. VAT

    £222.91 Inc. VAT

  • Screw 6,3x115 min.1.5mm self-tapping A2 - Pack of 100

    Schletter Screw 6,3x115 min.1.5mm self-tapping A2 - Pack of 100

    Part No: SLT-943763-115 Mounting - Fixings Threaded self-tapping screw - 6.3 x 115 mm Pack of 100

    Read more

    £43.53 Exc. VAT

    £52.24 Inc. VAT

  • Module Bearing Profile Solo - 4.75m

    Schletter Module Bearing Profile Solo - 4.75m

    Part No: SLT-120005-0475 Mounting - Mounting Rails 4.75m mounting rail Solo, 40mm x 40mm. Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Ideal for mounting 4 modules of the standard width side by side.

    Read more

    £41.50 Exc. VAT

    £49.80 Inc. VAT

  • Module Bearing Profile Solo - 3.55m

    Schletter Module Bearing Profile Solo - 3.55m

    Part No: SLT-120005-0355 Mounting - Mounting Rails 3.55m mounting rail, 40mm X 40mm. Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Ideal for mounting 3 modules of the standard width side by side.

    Read more

    £31.14 Exc. VAT

    £37.37 Inc. VAT

  • Module Bearing Profile Eco05 - 4.75m

    Schletter Module Bearing Profile Eco05 - 4.75m

    Part No: SLT-120001-475 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Eco05 Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 30mm Width: 30mm Length: 4750mm

    Read more

    £30.44 Exc. VAT

    £36.53 Inc. VAT

  • Module Bearing Profile Eco05 - 3.55m

    Schletter Module Bearing Profile Eco05 - 3.55m

    Part No: SLT-120001-0355 Mounting - Mounting Rails MODULE SUPPORT PROFILES Module support profile Eco05 Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Height: 30mm Width: 30mm Length: 3550mm

    Read more

    £23.68 Exc. VAT

    £28.42 Inc. VAT

  • Roof hook Rapid 2+ Universal ProLine

    Schletter Roof hook Rapid 2+ Universal ProLine

    Part No: SLT-101004-020 Mounting - Roof Anchor- Tile & Slates Schletter Rapid 2+ NEW Proline Roof hooks   Roof Hook Rapid2+ 45 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Universally adjustable, for vertical rail mounting (portrait) Wood screws must be ordered separately! Keywords: SLT101004000, Schletter, PV Mounting, Roof Anchor- Tile & Slate

    Read more

    £20.14 Exc. VAT

    £24.17 Inc. VAT

  • Plain tile Rapid Pro Roof Hook with Metal Tile replacement 170 x 380 KIT

    Schletter Plain tile Rapid Pro Roof Hook with Metal Tile replacement 170 x 380 KIT

    Part No: SLT-109019-020-PLAIN Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-109019-020 Roof hook plain tile for Rapid Pro Alu   1 x SLT-109016-009 Sheet metal replacement tile 170 x 380 for UK Plain Tile   SLT-109016-009:  Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile SLT-109019-020: Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set.

    Read more

    £17.46 Exc. VAT

    £20.95 Inc. VAT

  • Roof hook Universal with RapFix

    Schletter Roof hook Universal with RapFix

    Part No: SLT-100001-00R Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-100001-000 Roof hook Universal   1 x SLT-109008-003 RapFix attachment for Eco Roof hooks   Schletter Standard Roof hook with RapFix Universal Roof hook with RapFix attachment to allow easy connection of rail.   In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions Wood screws must be ordered separately!

    Read more

    £17.25 Exc. VAT

    £20.70 Inc. VAT

  • Slate Roof Hook with Slate Replacement Tile Rapid2+ Slate125

    Schletter Slate Roof Hook with Slate Replacement Tile Rapid2+ Slate125

    art No: SLT-109019-SLATE Mounting - Roof Anchor- Tile & Slates This part is made up of the following items: 1 x SLT-109019-024 Roof Hook for Slate Replacement Tile Rapid2+ Slate125   1 x SLT-109017-010 Slate Replacement Tile Rapid2+ Slate125   Schletter slate substitute tile with aluminium system hook for slate tiles. Might require cutting down on site.

    Read more

    £17.14 Exc. VAT

    £20.57 Inc. VAT

  • Roof hook Universal

    Schletter Roof hook Universal

    Part No: SLT-100001-000 Mounting - Roof Anchor- Tile & Slates Schletter Standard Roof hooks Universal Roof hook In stainless steel quality Variable bar arrangement Adjustable at the front and rear Middle bar can be set in three different positions Wood screws or rail attaching parts (square head bolts M10 × 25 mm and flange nuts or RapFix attachment) must be ordered separately! This roof hook is compatible with the following Genius Roof Solutions: Plain tile- GEN-FT-TILE

    Read more

    £13.65 Exc. VAT

    £16.38 Inc. VAT

  • Roof hook Rapid2+Pro 45

    Schletter Roof hook Rapid2+Pro 45

    Part No: SLT-101001-020 Mounting - Roof Anchor- Tile & Slates Schletter Rapid 2+ Roof hooks   Roof Hook Rapid2+ 45 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Please note the Rapid 2+ rail attachment might be attached to the roof hook using two different types of screws – torx or hexagonal. Please bear that in mind when choosing correct tools on site. Both screws are equal in terms of quality and strength and exact type does not impact the installation of the roof hook or has an impact on any other aspect of the quality of the product. Wood screws must be ordered separately!

    Read more

    £12.73 Exc. VAT

    £15.28 Inc. VAT

  • Roof hook Rapid2+ 35 ProLine

    Schletter Roof hook Rapid2+ 35 ProLine

    Part No: SLT-101002-020 Mounting - Roof Anchor- Tile & Slates ProLine range Schletter Rapid 2+ Roof hooks   Roof Hook Rapid2+ 35 mm height In stainless steel quality Welded Symmetric bar arrangement Pre-assembled Wood screws must be ordered separately!

    Read more

    £12.41 Exc. VAT

    £14.89 Inc. VAT

  • Roof hook plain tile for Rapid Pro Alu

    Schletter Roof hook plain tile for Rapid Pro Alu

    Part No: SLT-109019-020 Mounting - Roof Anchor- Tile & Slates Sheet metal replacement tiles and roof hook sets for plain tile Rapid including installation set. Please order sheet metal replacement tiles and roof hook sets separately. Compatible with the classic Schletter Solar mounting system and the Schletter ProLine series. 

    Read more

    £8.96 Exc. VAT

    £10.75 Inc. VAT

  • Insertion connector Solo / Profile Kit (Profile including screws)

    Schletter Insertion connector Solo / Profile Kit (Profile including screws)

    Part No: SLT-129060-000-KIT Mounting - Rail Connectors This part is made up of the following items: 2 x SLT-129060-000 Insertion connector Solo / Profile   4 x SLT-943001-232 Thin sheet metal screw 6.0 x 22 A2 with Oz gasket   Schletter Solo and Solo Light Internal Rail Connector Kit Schletter Solo and Solo Light internal rail connector kit. Used to join two rails together to create longer spans. This product contains 2x aluminium parts and 4 screws.  Recommended on trapezoidal roofs where rail alignment is a priority. Especially useful when using single fix trapezoidal fixings where standard external connectors could prevent the rails from sitting properly on the roof crests.

    Read more

    £8.94 Exc. VAT

    £10.73 Inc. VAT

  • Roof hook RapidA Pro 45 Max High Wind and Snow Loads

    Schletter Roof hook RapidA Pro 45 Max High Wind and Snow Loads

    Part No: SLT-101020-120 Mounting - Roof Anchor- Tile & Slates Schletter RapidA Pro 45 Max roof hooks The aluminium roof hook covers most of the applications on tiled roofs and is suitable for higher snow loads and wind loads. It allows quick and flexible mounting by hooking and is fastened with only one pan head screw with Torx. The screw-on plate is mounted on the rafter and the bracket is then clicked into place. Due to a rotatable multi-adapter, the roof hook can be combined with the profiles of the ProLine series and the classic Schletter modular system and has a height adjustment at the upper connection and a corresponding quick-mounting adapter. In aluminium Mounting with only one bolt Variable bar arrangement Clamping part pre-assembled

    Read more

    £8.94 Exc. VAT

    £10.73 Inc. VAT

  • Roof Hook for Slate Replacement Tile Rapid2+ Slate125

    Schletter Roof Hook for Slate Replacement Tile Rapid2+ Slate125

    Part No: SLT-109019-024 Mounting - Roof Anchor- Tile & Slates Roof hooks for Slate Replacement Tile Rapid2+ Slate125 To be used with SLT-109017-010 Slate Replacement Tile Rapid2+ Slate125

    Read more

    £8.82 Exc. VAT

    £10.58 Inc. VAT

  • Sheet metal replacement tile 170 x 380 for UK Plain Tile

    Schletter Sheet metal replacement tile 170 x 380 for UK Plain Tile

    Part No: SLT-109016-009 Mounting - Roof Anchor- Tile & Slates Plain tile kit Sheet metal replacement tile 170 x 380 for UK Plain Tile BEZ Rapid beaver tail AL 170 x 380   To used with SLT-109019-000 Roof hooks for Rapid beaver tail AL inst

    Read more

    £8.50 Exc. VAT

    £10.20 Inc. VAT

  • Slate Replacement Tile Rapid2+ Slate125

    Schletter Slate Replacement Tile Rapid2+ Slate125

    Part No: SLT-109017-010 Mounting - Roof Anchor- Tile & Slates Slate for Rapid2+  To be used with SLT-109019-004 Roof Hook for Slate Replacement Tile Rapid2+ Slate125  

    Read more

    £8.32 Exc. VAT

    £9.98 Inc. VAT

  • Flat Roof Support Light 3.2m Beam Kit - Strut 338mm

    Schletter Flat Roof Support Light 3.2m Beam Kit - Strut 338mm

    Part No: SLT-159005-001 Mounting - Flat Roof Schletter Special Supports This is the new style of A frame mounting. Then for different angle you can order the vertical angle strut to get your 15 or 30 degree anglle 15 Deg angle you need following 2 vertical beams struts SLT-159005-001 & SLT-159005-005

    Read more

    £6.58 Exc. VAT

    £7.90 Inc. VAT

  • Roof hook Eco A 45 Max

    Schletter Roof hook Eco A 45 Max

    Part No: SLT-100020-100 Mounting - Roof Anchor- Tile & Slates The new ECO A 45 ROOF HOOK EcoA aluminium roof hook will cover a wide range of applications on tiled roofs in future.  It makes quick and flexible installation possible by hooking in and is fastened with just one Torx pan head screw. The assembly is simplified by an additional feature: First, only the screw-on plate is mounted on the rafters and the bracket is only snapped in afterwards. At the same time, it can be combined with all common Schletter profiles Product Features Material: Aluminium Fastening with a pan head screw Variable bridge arrangement Hook on: Our new EcoA roof hook is faster to install than ever. 10 Year Warranty

    Read more

    £5.98 Exc. VAT

    £7.18 Inc. VAT

  • Hanger bolt 10x200 with KlickTop attachment SET

    Schletter Hanger bolt 10x200 with KlickTop attachment SET

    Part No: SLT-110010-200-KT Mounting - Roof Anchor- Hanger Bolts This part is made up of the following items: 1 x SLT-119001-020 KlickTopPro attachment for hanger bolt   1 x SLT-110010-200 Hanger bolt kit 10x200 assembled - Wood Purlins   Corrugated roof fastening kit KlickTop, including KlickTop kit, Hanger bolt with valcanized EPDM-sealing (UV resistant) and 3 flange nuts in V4A quality Keywords: SLT111110200, Schletter, PV Mounting, Roof Anchor- Hanger Bolt

    Read more

    £5.35 Exc. VAT

    £6.42 Inc. VAT

  • Hanger bolt kit 12x300 assembled - Wood Purlins

    Schletter Hanger bolt kit 12x300 assembled - Wood Purlins

    Part No: SLT-110212-300 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet   For corrugated sheets (such as those of fibre cement) or trapezoidal sheet roofs, corrugated roof fastening sets consisting of a special hanger bolt with EPDM seal and a mounting plate are used. Please note that illustrations and thread lengths may vary! Hanger bolt set 12 x 300 pre-assembled with vulcanized EPDM seal (UV resistant) and 3 flange nuts in V4A.

    Read more

    £4.48 Exc. VAT

    £5.38 Inc. VAT

  • SingleFix Pro for corrugation heights from 22 mm (2 pieces)

    Schletter SingleFix Pro for corrugation heights from 22 mm (2 pieces)

    Part No: SLT-113009-003-KIT Mounting - Roof Anchor- Trapezoidals This part is made up of the following items: 2 x SLT-113009-003 SingleFix Pro for corrugation heights from 22 mm (1 piece)   4 x SLT-943000-360 Screw 6.0 x25 self-tapping A2 with sealing washer   SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (2 pieces).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails This part No represents one of Singlefix plate SLT-113009-003 x 2 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail.

    Read more

    £4.27 Exc. VAT

    £5.12 Inc. VAT

  • Hanger bolt kit 12x200 assembled - Wood Purlins

    Schletter Hanger bolt kit 12x200 assembled - Wood Purlins

    Part No: SLT-110012-200 Mounting - Roof Anchor- Hanger Bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet roofs, corrugated roof fastening sets consisting of a special hanger bolt with EPDM seal and a mounting plate are used. Hanger bolt with valcanized EPDM-sealing (UV resistant) and 3 flange nuts in V4A quality Additional mounting rail attachment required.

    Read more

    £3.84 Exc. VAT

    £4.61 Inc. VAT

  • Insertion connector Solo / Profile

    Schletter Insertion connector Solo / Profile

    Part No: SLT-129060-000 Mounting - Rail Connectors Schletter Solo and Solo Light internal rail connector. Used to join two rails together to create longer spans. This product contains 1x aluminium parts. Screws are sold seperately.  Recommended on trapezoidal roofs where rail alignment is a priority. Especially useful when using single fix trapezoidal fixings where standard external connectors could prevent the rails from sitting properly on the roof crests.

    Read more

    £3.81 Exc. VAT

    £4.57 Inc. VAT

  • FixGrid FixZ-15 lower system rail 96mm with connector

    Schletter FixGrid FixZ-15 lower system rail 96mm with connector

    Part No: SLT-163900-002 Mounting - FixGrid FixGrid FixZ-15 lower system rail 96mm with connector fixgrid

    Read more

    £3.59 Exc. VAT

    £4.31 Inc. VAT

  • RapFix attachment for Eco Roof hooks

    Schletter RapFix attachment for Eco Roof hooks

    Part No: SLT-109008-003 Mounting - Roof Anchor- Tile & Slates Designed particularly for Roof hooks which are not available as a rapid version. Replacement for KlickTop connectors. RapFix attachment allows easy connection of rail to the roof hook.

    Read more

    £3.59 Exc. VAT

    £4.31 Inc. VAT

  • Rapid cross connector

    Schletter Rapid cross connector

    Part No: SLT-129063-000 Mounting - Cruciforms Rapid cross connector - The convenient way to connect overlapping rails Economically priced, quick and safe. Allows for a cross-rail system for a change in module layout, which also benefits from better cooling due to increased spacing. Clips directly on seamed metal roofs clamps for a portrait mounting rail-system. Fully pre-assembled and connects in 3 simple steps to any Schletter-Klick channel M8 slot. Hook in clamp ensures that rails will not be twisted due to unsymmetrical loads.   All benefits of the Rapid system can now also be leveraged by the cross rail system!    This part replaces 'KlickTop M8 cross connector kit SLT-129004-000’ and because the bearing surface is identical, only the “clamping” method is different, both parts can be used on the same site if needed.  

    Read more

    £3.57 Exc. VAT

    £4.28 Inc. VAT

  • Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 & FixZ-15

    Schletter Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 & FixZ-15

    Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled

    Read more

    £3.46 Exc. VAT

    £4.15 Inc. VAT

  • Standing seam clamp 510 AL Rapid for KalZip and similar designs

    Schletter Standing seam clamp 510 AL Rapid for KalZip and similar designs

    Part No: SLT-112002-003 Mounting - Roof Anchor- Seam Clamps SHEET METAL SEAM CLAMPS Please note: The tightening torque must be limited so that the sheet metal seam does not become distorted and the thermal lengthening of the sheets is not prevented! Folding clamp 510 AL Rapid for KalZip and similar. Non-penetrative clamps

    Read more

    £3.43 Exc. VAT

    £4.12 Inc. VAT

  • Schletter ClampFit Fastener

    Schletter Schletter ClampFit Fastener

    Part No: SLT-130004-200 Mounting - Roof Anchor- Trapezoidals This is a new version of the popular trapezoidal fastener ClampFit-H for landscape modules. The new fastener uses standard module clamps, which makes the different sizes redundant and provides a classical “one fits all” solution for this extremely cost effective fastener. Works with standard Schletter Rapid2 + and Rapid16 module clamps. The system is suitable for all trapezoidal sheets whose sides are at least 22 mm high and from 8 ° to max. 45 ° are inclined System components: aluminum Screws: stainless steel Seal: EPDM Screws must be ordered separately as needed (2 pieces for each ClampFit) Please note typically this system will use 4 fixing points per module. At high wind or snow loads or with large modules it can might be required to use more fixing points.

    Read more

    £3.34 Exc. VAT

    £4.01 Inc. VAT

  • FixPlan sealing plate

    Schletter FixPlan sealing plate

    Part No: SLT-114003-000 Mounting - Storm Washers In connection with hanger bolts as an alternative for flat sheet metal roofs, where fastening to the rebate is not possible (e.g. titanium zinc sheet roofs).

    Read more

    £3.17 Exc. VAT

    £3.80 Inc. VAT

  • Module Bearing rail EcoLight 450mm

    Schletter Module Bearing rail EcoLight 450mm

    Part No: SLT-120011-00450 Mounting - Mounting Rails A pre-cut 450mm section of rail, ready-to-use in conjunction with the SingleFix Pro. Mechanical connection Upper: KlickNut M8 Lower: Screw channel M10 Cost effective solution to full rail lengths

    Read more

    £3.15 Exc. VAT

    £3.78 Inc. VAT

  • KlickTopPro attachment for hanger bolt

    Schletter KlickTopPro attachment for hanger bolt

    Part No: SLT-119001-020 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium

    Read more

    £3.07 Exc. VAT

    £3.68 Inc. VAT

  • FixGrid Surface protection mat with aluminium lamination 300 x 110 x 20mm

    Schletter FixGrid Surface protection mat with aluminium lamination 300 x 110 x 20mm

    Part No: SLT-169004-003 Mounting - FixGrid FixGrid Structure protection mat 230 x 200 x 6 strips with aluminium lamination

    Read more

    £2.78 Exc. VAT

    £3.34 Inc. VAT

  • Mounting plate for hanger bolt M10 M12

    Schletter Mounting plate for hanger bolt M10 M12

    Part No: SLT-119002-000 Mounting - Roof Anchor- Hanger Bolts Hanger bolt Mounting plate for hanger bolt M10 / M12 For hanger bolts M10 / M12, loose, aluminium 120 x 60 x 6 mm

    Read more

    £2.61 Exc. VAT

    £3.13 Inc. VAT

  • Connector plate Eco05 Internal Connector Kit - Including Screws

    Schletter Connector plate Eco05 Internal Connector Kit - Including Screws

    Part No: SLT-129001-014-KIT Mounting - Rail Connectors This part is made up of the following items: 1 x SLT-129001-014 Connector plate Eco05 Internal Connector   2 x SLT-943001-232 Thin sheet metal screw 6.0 x 22 A2 with Oz gasket   Rail Connector Kit for Eco05 Profile Rails The easier and cleaner solution for joining Eco rails. This connecter includes the following: Connector section which is 250mm long  SLT-943755-925 - 2 x 5.5x25mm self-tapping screws per connection

    Read more

    £2.54 Exc. VAT

    £3.05 Inc. VAT

  • Hanger Bolt Kit 10 x 200 assembled - Wood Purlins

    Schletter Hanger Bolt Kit 10 x 200 assembled - Wood Purlins

    Part No: SLT-110210-200 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet Hanger bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet metal roofs, so-called fastening kits for corrugated roofs are used, comprising a special hanger bolt with EPDM gasket (will need additional mounting plate). Please note that thread lengths can deviate from the corresponding figures. Hanger bolt kit with vulcanized EPDM gasket (UV-resistant) and 3 high-grade steel flange nuts (V4A), assembled

    Read more

    £2.29 Exc. VAT

    £2.75 Inc. VAT

  • Hanger bolt kit 10x200 assembled - Wood Purlins

    Schletter Hanger bolt kit 10x200 assembled - Wood Purlins

    Part No: SLT-110010-200 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet Hanger bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet metal roofs, so-called fastening kits for corrugated roofs are used, comprising a special hanger bolt with EPDM gasket (will need additional mounting plate). Please note that thread lengths can deviate from the corresponding figures. Hanger bolt kit with vulcanized EPDM gasket (UV-resistant) and 3 high-grade steel flange nuts (V4A), assembled Hanger bolt kit 10 × 200 assembled M10 × 200 mm This hanger bolt is suitable for wood purlins / sub structure

    Read more

    £2.29 Exc. VAT

    £2.75 Inc. VAT

  • Universal-Adapter M8 (BTO)

    Schletter Universal-Adapter M8 (BTO)

    Part No: SLT-119033-002 Mounting - Roof Anchor- Hanger Bolts Universal adapter Uno M8 for hanger bolt Reasons for use: Single and double fixing on steel purlins As clamp dowel for special applications in connection with the Eco05 module support profile. Support profile must be fastened with M8 screws to the clamp dowel. LxWxH: 104 x 50 x 50 mm

    Read more

    £2.09 Exc. VAT

    £2.51 Inc. VAT

  • Universal-Adapter M10/M12

    Schletter Universal-Adapter M10/M12

    Part No: SLT-119033-001 Mounting - Roof Anchor- Hanger Bolts Hanger bolt KlickTop extension part for hanger bolt For M10 / M12 hanger bolts, loose, aluminium

    Read more

    £2.01 Exc. VAT

    £2.41 Inc. VAT

  • Connector plate Eco05 Internal Connector

    Schletter Connector plate Eco05 Internal Connector

    Part No: SLT-129001-014 Mounting - Rail Connectors Rail connector for Eco05 profile rails. The easier and cleaner solution for joining Eco rails. Keywords: 129001-004, Schletter, PV Mounting This connecter includes the following: Connector section which is 250mm long 

    Read more

    £1.87 Exc. VAT

    £2.24 Inc. VAT

  • Universal Calotte with EPDM (BTO)

    Schletter Universal Calotte with EPDM (BTO)

    Part No: SLT-119005-001 Mounting - Fixings For sealing on roofs made of trapezoidal sheet metal.  

    Read more

    £1.67 Exc. VAT

    £2.00 Inc. VAT

  • SingleFix Pro for corrugation heights from 22 mm (1 piece)

    Schletter SingleFix Pro for corrugation heights from 22 mm (1 piece)

    Part No: SLT-113009-003 Mounting - Roof Anchor- Trapezoidals SINGLEFIX The universal trapezoidal sheet fastener for steel and aluminium sheet from 0.5 mm.     SingleFix Pro for corrugation heights from 22 mm (1 piece).    Screws must be ordered separately as needed (2 pieces for each SingleFix Pro)   Used in connection with Solo mounting rails The easy solution for mounting in Portrait on IBR roofs. SA: Using this part along with our SingleFix-V solo (SLT-113009-200) rails will allow the panels to have enough ventilation for effective heat dissipation. This part No represents one of Singlefix plate SLT-113009-003 x 1 Correctly designed fixing requires 2x plates and 4x metal screws and needs to be attached to mounting rail.

    Read more

    £1.47 Exc. VAT

    £1.76 Inc. VAT

If you are looking for the strongest brand on the market, look no further. Schletter mounting group is a time-tested brand with a history in manufacturing that dates back to 1968. One of the only companies to offer a 25-year warranty to match the lifespan of the solar module. This Bavarian company specialise in all aspects of solar mounting on a global scale, from huge ground mount projects to small pitched roofs.  

Schletter group provide strength, quality & reliability. Using only high-grade materials guarantees maximum durability. Schletter mountings are well known for fast installation times, due to the strength of mounting products its often possible to use less fixings, resulting in faster install times, saving time and money.

Forgot Password


Back to top