Victron

Out of the various BMS'es available* for the all new Lithium NG batteries, the Lynx Smart BMS NG is the most feature-rich and complete option and integrates seamlessly with other M10 products in the Lynx Distributor system. It is available in 500 A (M10) and 1000 A (M10) versions 1) Built-in 500 A or 1000 A contactor Available in 500 A (M10) and 1000 A (M10) versions. Acts as a secondary safety system to protect the battery in case primary controls (ATC, ATD and/or DVCC) fail. Suitable as a remote controllable main system switch. Pre-charge circuit Prevents high inrush currents when connecting capacitive loads like inverters. Eliminates the need for external pre-charging devices. Monitoring and control Bluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal. Readout of cell voltages and temperatures also on GX devices and the VRM portal. Built-in battery monitor provides data such as state of charge, voltage, current, historical data, status info and more in real time. Diagnostic at a glance with Instant Readout DVCC closed loop control as well as ATC/ATD contacts Compatible Victron inverter/chargers, the Orion XS 12/12-50A DC-DC battery charger and solar charge controllers are automatically controlled via a connected GX device and DVCC. ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port. Programmable relay Can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). Features Alternator ATC mode for safe alternator disconnection before battery disconnects AUX terminal Onboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown. Automatic shutdown of BMS and AUX connection if no charge voltage detected within 5 minutes after a low voltage event VE.Can and NMEA 2000 data communication Easy connection and communication with GX devices via VE.Can using a standard RJ45 network cable. Integration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable). Lynx Distributor fuse monitoring Monitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices. Receive alarms in case of blown fuses. Brand Victron Energy Maximum Input Voltage 75 VDC Weight 1.9Kg Dimensions 190 x 180 x 80 mm Voltage Range 9 – 60 VDC

Read more less

Features of the Lynx Smart BMS Battery Management SystemThe Lynx Smart BMS is a dedicated Battery Management System for Victron Energy Lithium Smart Batteries. It contains a positive and a negative busbar, a BMS, a contactor and a battery monitor. It is part of the Lynx Distribution system. It can communicate via Bluetooth with the VictronConnect app and can communicate via VE.Can with an GX device. The Lynx Smart BMS has a status LED and a Bluetooth LED.   VictronConnect appThe Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored and setup with the VictronConnect app. For more information see the VictronConnect app download page and the VictronConnect manual.   GX deviceThe Lynx Smart BMS and up to 4 connected Lynx Distributors can be monitored with a GX device. For more information on the GX device see the GX device product page.The GX device can be connected to the VRM portal allowing for remote monitoring.For more information on the VRM portal see the VRM page.   Lithium Smart BatteriesThe Lynx Smart BMS is a dedicated BMS for the Victron Energy range of Lithium Smart batteries. These batteries are lithium iron phosphate (LiFePO4) batteries and are available in 12.8V or 25.6V and in a variety of capacities. They can be connected in series, parallel and series/parallel so a battery bank for system voltages of 12V, 24V or 48V can be created. Up to four 12.8V batteries or two 25.6V batteries can be connected in series.Up to 5 batteries or battery series strings can be connected in parallel.   The Lynx Distribution SystemThe Lynx Distribution System consist of the following parts:• Lynx Power In – A positive and negative busbar with 4 connections for batteries or DC equipment.• Lynx Distributor – A positive and negative busbar with 4 fused connections for batteries or DC equipment together with fuse monitoring• Lynx Shunt VE.Can – A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device.• Lynx Smart BMS – For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor that is driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal.

Read more less

Built-in 1000A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch Battery monitor, indicating state of charge percentage and more data. Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell. Bluetooth for use with VictronConnect App, for setup and monitoring. Local and remote monitoring using a Victron GX device, for example the Cerbo GX. The Lynx Smart BMS is part of the modular Lynx Distribution system. Brand Victron Energy Manufacturer Part Number LYN034170210 Dimensions 230 x 180 x 100 mm Weight 2.7Kg

Read more less

  Built in 1000 Amp Contactor acts as a fail-safe emergency shut off  Built in Battery Monitor  Pre-Alarm signal give a warning before shutoff Built in Bluetooth Local and remote monitoring when used with a Cerbo GX  For use with Victron Smart Lithium Batteries only  Comes with a 5 year warranty

Read more less

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are: Built-in 1000A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch Battery monitor, indicating state of charge percentage and more data. Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell. Bluetooth for use with VictronConnect App, for setup and monitoring. Local and remote monitoring using a Victron GX device, for example the Cerbo GX.

Read more less