Sunsynk

Part No: SUN-8.0-ECCO Storage Systems - Hybrid Inverter The Sunsynk 5kW hybrid Inverter is the ideal inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.  Pylontech Compatibility Tested: US 3000C  US 2000B-Plus US 3000B Not currently tested with Pylon – LV Hub please consult with us before proceeding For installations with the US3000C and UP5000 please use the following BMS cable    INSTALLER NOTICE: Installations with Sunsynk products now need to be registered here to gain full activation of the warranty. BEFORE INSTALLATION, please ensure that you check that the Inverter is updated to the latest firmware version.  Latest Version 3367 E41C Supplier Part No: Sunsynk-8.8-K-SG01LP1 ECCO Weight: 25 kg Rated Power: 8,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 6,500 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Part No: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Additional features:  Dual MPPT design   Compatible with Lithium-ion batteries and Lead Acid batteries  5-year warranty as standard  IP65 rated  Anti-islanding protection  Fully programmable power export  Automatic switching from Grid-Tied to Off-Grid mode  Up to 16 units with the same firmware can be paralleled.   TIP: Quote this inverter for larger houses that can take more than 4kWp of PV and where higher power grid connection is an issue. 

Read more less

Details INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES.  NOTE - YOU CANNOT MIX BATTERY TYPES. WARNING NOTE - You cannot mix Sunsynk G5.3, BYD, CATL, IP20 or IP65 batteries in the same system.  

Read more less

It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces.Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Part No: SUN-BAT-CATL-5.12 Storage Systems - Li-ion Battery Pack It has 100% DoD, with 5.12kW max discharge power, a long-life span with a standard 5-year product warranty. Additional features:  Up to 16 units with the same firmware can be paralleled  IP rating 40  Self-monitoring function to detect abnormalities  Excellent thermal stability  Brackets not included; use these - SUN-WALL-BR Please note: These batteries contain CATL cells and are not intercompatible    Supplier Part No: Sunsynk CATL Battery LFP 5.12kWh Weight: 47.5 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 9600 W Maximum Charge Rate (5 Minutes): 4800 W

Read more less

Part No: SUNSYNK-BB-300 Accessories - Energy Management System SunSynk Busbar - Electrical Distribution Component Features: Electrical distribution component with positive and negative busbars Four connectors for batteries or chargers and a ground connection Expandable capacity through additional busbars Voltage Range 9-60V DC Current Rating 800A The unit is not compatible with cables 10mm in Diameter as they become to large to fit comfortably around the rubber grommet.

Read more less

It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces.Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Part No: SUN-HV-5.12-BATT Storage Systems - Li-ion Battery Pack Please note that this is a singular part, please use SUN-HV-61.44 or SUN-HV-20.48 Supplier Part No: HV 5.12kWh Battery (Black) Weight: 44 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5120 W Maximum Discharge Rate (5 Minutes): 5120 W Surge Discharge Rate (15 Seconds): 5120 W Maximum Charge Rate (5 Minutes): 5120 W

Read more less

Product description Sunsynk 3ph 10K Hybrid Inverter solar & wind Inverter #5: SYNK-10K-SG04LP3 The Sunsynk Three-Phase Hybrid Storage Inverters are highly efficient power management tools for three-phase grid applications. These inverters allow the user to control power flow from multiple sources such as solar, main electrical grids, and generators, and effectively store and deliver electric power to your applications.These amazing three-phase inverters have a unique feature. They can operate and balance the load, which means you can have 20% connected to one phase, 20% to another, and 60% to the third phase, and it still gives perfect phase rotation. No other inverter in their class can offer this feature.Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  

Read more less

Part No: LIFE-3.6-HYB02 Storage Systems - Hybrid Inverter Sunsynk LifeLynk X   

Read more less

Part No: SUN-HV-61.44 Storage Systems - Li-ion Battery Pack Sunsynk High Voltage 61.44kWh Complete Storage System Weight: 572 kg Battery Type: Lithium Ion Nominal Energy: 61440 Wh Depth of discharge: 100.00 % Voltage: 6144 V Continuous Discharge Rate (Normal Use): 61440 W Maximum Discharge Rate (5 Minutes): 61440 W Surge Discharge Rate (15 Seconds): 61440 W Maximum Charge Rate (5 Minutes): 61440 W

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack. 

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less

Details The Sunsynk 8kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 8000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 422mm (W) x 702mm (H) x 281mm (D) Weight: 47.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

Part No: SUN-50.0-3PH Storage Systems - Hybrid Inverter The Sunsynk 50kW three phase high voltage hybrid Inverter is the ideal commercial inverter for managing power flow from multiple sources such as solar, main electrical grid and generator.   Supplier Part No:SYNK-50K-SG01HP3-EUWeight:75 kgRated Power:50,000 WMin PPT Voltage:150 VMax PPT Voltage:850 VDC Startup Voltage:180 VDC Shutdown Voltage:150 VMax Input Voltage:1,000 VMax DC Power:65,000 WMax AC Power (5 Minutes):50,000 WSurge AC Power (1 Second):55,000 WMax DC Current:144 AMax DC Inputs:8Has DC Fuses:0Connector:MC4  Included Connectors:0Euro Efficiency:97 %Transformer:NoneMPPT Quantity :4Has Integrated DC Switch:YesWarranty:5 years

Read more less

Part No: SUN-CABLE-SHORT Storage Systems - Accessory Battery to Battery short cable pack.  For Sunsynk CATL battery only.  Does not work with Sunsynk BYD battery.    Supplier Part No: Battery Cable Pack Short for Sunsynk Weight: 0.2 kg Length: 0.3 m

Read more less

Cable length: 600mm

Read more less

The Sunsynk Acure is a next-generation hybrid inverter designed for smarter, safer, and more efficient energy management across solar, battery, and grid systems. Product Features Programmable, wireless smart switch (40 Amp switch included.) Max. 10 smart switches supported for Max power optimisation. Wireless CT coil facility. Built-in Bluetooth and Wi-Fi. (no external data logger). Built in LAN connection. Brand new UI enhancing accessibility for users of all levels. Built in Arc fault detection. Built in solar panel theft detection circuits. Has multi-colour LED strip offering real-time insights of the system. Up to 16 units can be connected in parallel. IP65 rated. Intelligent air cooling. 5-year Standard warranty Supplier Part No: 10000033 (white) Weight: 27.1 kg Length: 0.37 m Rated Power: 8,000 W Min PPT Voltage: 125 V Max PPT Voltage: 425 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 500 V Max DC Power: 12,800 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 16,000 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 97.5 % Transformer: none MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years

Read more less

Additional features:  A total of 15x inverters can be connected in a three-phase configuration (five units per phase) - giving a maximum power output of 240kW  Three inverters can be connected in a single-phase configuration giving a total power of 48kW  Contains 3x MPPTs to allow for flexible PV array designs and improved efficiency  Programmable multiple operation modes: on-grid/off-grid & UPS  IP65 protection rating  Wi-Fi dongle as standard – enabling remote monitoring via the Sunsynk cloud  Compatible with leading lithium battery brands such as Hubble Lithium, Pylontech LV, Freedomwon and Kodak (BL3.6)  Sunsynk inverter and Freedom Won battery pairing : 10-year extended warranty. For installations with Pylontech, REVOV and Hubble Lithium batteries use this BMS cable For installations with Freedom Won batteries use this BMS cable Installations with Sunsynk products need to be registered to gain full activation of the warranty. Equipment warranty registration needs to take place within 7 (seven) days of commissioning of the project, failure to register the warranty may result in the warranty being made void.   Supplier Part No: SUNSYNK-16K-SG01LP1 Weight: 56 kg Rated Power: 16,000 W Min PPT Voltage: 250 V Max PPT Voltage: 450 V DC Startup Voltage: 150 V DC Shutdown Voltage: 0 V Max Input Voltage: 450 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 16,001 W Surge AC Power (1 Second): 32,000 W Max DC Current: 66 A Max DC Inputs: 6 Has DC Fuses: 0 Connector: Screw Terminal   Included Connectors: 12 Euro Efficiency: 97.6 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: SYNKIP65-LONGCABL Cables - Battery Cable Price reduced from £61.30 on 23/10/2025

Read more less

The Sunsynk 20kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 20000W. This three-phase inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty  

Read more less

Part No: SUN-WALL-BR   Storage Systems - Wall Bracket

Read more less

Part No: SUN-CABLE-SHORT Storage Systems - Accessory Battery to Battery short cable pack.  For Sunsynk CATL battery only.  Does not work with Sunsynk BYD battery.    Supplier Part No: Battery Cable Pack Short for Sunsynk Weight: 0.2 kg Length: 0.3 m

Read more less

Details An essential part of an electrical distribution system, the Sunsynk busbar helps ensure a smooth flow of electricity between various components such as circuit breakers, transformers and electrical panels.  Its robust ABS outer casing makes for a long-lasting product, while its scalable setup means you can connect multiple busbars to increase capacity. Key features: Electrical distribution component with positive and negative busbars Offers four connections for batteries, loads or chargers, plus a ground connection Conducts electricity between different components such as circuit breakers, transformers and electrical panels Capacity is expandable by connecting to further busbars Durable ABS casing enclosing tinned copper busbar (8m x 30mm) Ingress protection rating: IP22 Voltage range: 9-60V DC Current rating: 800A Dimensions: 165mm (H) x 245mm (W) x 75mm (D) Weight: 1.8kg

Read more less

Details The Sunsynk W10.6 battery is a high-performance energy storage solution that allows you to maximise the clean solar energy you generate through your PV system. It offers up to 10.64kWh of energy but if you need more, it's also scalable by using up to 32 together for a maximum of 340kWh. It's engineered to charge in temperatures as low as -10°C, and discharge as low as -20°C. Plus, with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces. Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LiFePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 340kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 610mm (W) x 760mm (H) x 200mm (D) Weight: 105kg

Read more less

Details The Sunsynk W5.3 battery is a high-performance energy storage solution that allows you to maximise the clean solar energy you generate through your PV system. It offers up to 5.32kWh of energy but if you need more, it's also scalable by using up to 32 together for a maximum of 170kWh. It's engineered to operate in temperatures as low as -10°C and with an ingress protection rating of IP65, it can be situated outdoors if necessary, although its compact design helps it fit into a variety of spaces. Installation of this Sunsynk battery is straightforward and it's compatible with a wide range of solar systems. It's designed to integrate seamlessly with your existing setup, providing you with an efficient and reliable energy storage solution you can count on. Key features: Premium LifePO4 solar storage battery Lithium ferro phosphate cell technology Scalable modular operation means you can use up to 32 batteries for 170kWh per inverter Can be wall-mounted indoors or outdoors 90% recommended depth of discharge Provides over 6000 charge cycles Ingress protection rating: IP65 Dimensions: 440mm (W) x 620mm (H) x 135mm (D) Weight: 46kg 10-year warranty

Read more less

Details Built for large-scale grid-connected systems, the Sunsynk 100kW three-phase string inverter is specially designed for solar conversion in commercial installations. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for large commercial installations Six MPPTs with four strings per tracker Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.8% Ingress protection: IP65 Dimensions: 824mm (W) x 516mm (H) x 312.7mm (D) Weight: 81kg Five-year standard warranty

Read more less

Details Built for large-scale grid-connected systems, the Sunsynk 80kW three-phase string inverter is specially designed for solar conversion in commercial installations. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for large commercial installations Four MPPTs with four strings per tracker Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.7% Ingress protection: IP65 Dimensions: 700mm (W) x 575mm (H) x 297mm (D) Weight: 60kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 50kW three-phase string inverter is specially designed for solar conversion in commercial properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Four MPPTs with three strings per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.7% Ingress protection: IP65 Dimensions: 434mm (W) x 570mm (H) x 243mm (D) Weight: 39kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 25kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with two strings per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.5% Ingress protection: IP65 Dimensions: 362mm (W) x 527mm (H) x 220mm (D) Weight: 20kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 15kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with one string per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.5% Ingress protection: IP65 Dimensions: 283mm (W) x 463mm (H) x 178mm (D) Weight: 11kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 10kW three-phase string inverter is specially designed for solar conversion in commercial and larger residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for commercial and larger residential installations Two MPPTs with one string per tracker Compact design Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 98.3% Ingress protection: IP65 Dimensions: 283mm (W) x 463mm (H) x 178mm (D) Weight: 11kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for residential installations Two MPPTs with one string per tracker Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 305mm (W) x 280mm (H) x 180mm (D) Weight: 7.7kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 3.6kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: String inverter designed for residential installations Two MPPTs with one string per tracker Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 305mm (W) x 280mm (H) x 180mm (D) Weight: 7.7kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 2.5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: Single-MPPT string inverter designed for residential installations Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 280mm (W) x 310mm (H) x 184mm (D) Weight: 5.4kg Five-year standard warranty

Read more less

Details Compact and reliable, the Sunsynk 1.5kW single-phase string inverter is designed specially for solar conversion in smaller residential properties. Its attractive design helps it blend in while its ingress protection rating of IP65 means it can be positioned outside if necessary. Its streamlined system design minimises complexity, making it quick and easy to install. Meanwhile, its multiple safety features protect your investment and keep everything in good working order. Key features: Single-MPPT string inverter designed for residential installations Compact design Optimised DC-to-AC conversion for reliable performance Uncomplicated system design to speed up installation Multiple safety features such as over-current and over-voltage protection, arc fault circuit interrupter (AFCI) and DC reverse polarity protection Maximum efficiency: 97.3% Ingress protection: IP65 Dimensions: 280mm (W) x 310mm (H) x 184mm (D) Weight: 5.4kg Five-year standard warranty

Read more less

Details Designed for industrial and commercial applications, the Sunsynk 50kW three-phase hybrid inverter offers superb power management and high efficiency. With remote monitoring capabilities through the dedicated Sunsynk Connect app, you can track the efficiency of your system on-the-go, helping you to stay ahead of potential issues to ensure optimal performance. Built for easy installation and maintenance, this three-phase solar inverter will seamlessly integrate into your world to reduce costs, and provide reliable, renewable energy. Manage power flow from multiple sources such as solar, mains power (grid) and generators, and effectively store and release power, as and when utilities require. Key features: Easy-to-understand display with visual power flow screen Supports Wi-Fi monitoring and two strings for one MPP tracker and one string for another Smart-settable three-stage MPPT charging to optimise battery performance Programmable multiple operation modes: on-grid, off-grid and UPS Fully programmable controller and supply priority for battery or grid Works with lithium-ion batteries, including high-voltage batteries DC- and AC-coupled to retrofit to an existing solar system Limiting function to prevent excess power overflow to grid Protection against overload, over-temperature and short-circuit Dimensions: 527mm (W) × 894mm (H) × 294mm (D) Weight: 100.5kg Ingress protection: IP65 Five-year warranty

Read more less

Details The Sunsynk 25kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 25000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Details The Sunsynk 20kW three-phase hybrid inverter is an ideal solution to reduce your electricity costs and manage power from various energy sources. Whether it's solar panels, batteries, the national grid, a generator or even a wind turbine, this hybrid inverter can handle it all. This versatile inverter is ideal for both home and business use and is scalable, so you can expand it as required. With inputs for PV solar, AC grid power, batteries and a generator, this inverter can deliver a continuous power output of 20000W. This three-phase solar inverter can charge both lead-acid and lithium-ion batteries, and innovatively works to balance the load across the three phases to avoid overloading. With seamless energy load balancing, this inverter can handle a load distribution of 20% on one phase, 20% on another, and 60% on the third phase, while still delivering perfect phase rotation. Key features: Easy-to-understand display Supports Wi-Fi or GSM monitoring Compatible with lithium-ion and lead-acid batteries Smart-settable three-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export Works on or off-grid and with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Dimensions: 408mm (W) x 638mm (H) x 237mm (D) Weight: 38.5kg Rated IP65 for ingress protection Five-year standard warranty

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 8kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 7kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 5kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 3.6kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 8kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 7kW hybrid inverter Two MPPTs with two strings per MPPT Inbuilt communication via RS485, RS232 or CAN, and monitoring via GPRS, Wi-Fi, Bluetooth, 4G and LAN (optional) Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 366mm (W) x 630mm (H) x 281.41mm (D) (excluding connectors and brackets) Weight: 27.1kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 5kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less

Details Developed to improve efficiency, the Sunsynk Acure hybrid inverter is quick to install with minimal cabling to reduce complexity. It's also compatible with the Sunsynk Connect Pro cloud-based energy management system which allows installers to log on remotely and perform commissioning, adjustments and troubleshooting without having to visit site. All of this is designed to speed up installation times and reduce downtime. Inbuilt arc fault detection and protection against issues such as overvoltage and overcurrent offer safety and reliability, while a PV circuit alarm provides alerts the user if the unit is tampered with or disconnected. Plus, its five-year standard warranty can be increased to 10 years if installed with a Sunsynk battery. Key features: Efficient 3.6kW hybrid inverter Two MPPTs with one string per MPPT Inbuilt connectivity via Bluetooth, Wi-Fi, ethernet (LAN) and LoRA Wireless CT coil and support for up to 10 wireless smart switches to reduce unnecessary cabling and enable dynamic load management Support for rapid shutdown and dry contact generator start for grid failure backup or off-grid usage Hinged terminal cover and discreet cable routing for a sleek finish and enhanced safety Inbuilt arc fault detection to reduce risk of fires PV circuit alarm offers alerts in the event of tamper or disconnection Compatible with Sunsynk Connect Pro cloud-based energy management platform so users can track generation, consumption and battery status in real time Remote commissioning, adjustments and troubleshooting to reduce site visits and downtime Maximum efficiency: 97.6% Ingress protection: IP65 Dimensions: 376mm (W) x 530mm (H) x 276mm (D) Weight: 19.35kg Five-year warranty (10 years if installed with a Sunsynk battery)

Read more less