Solax Power Inverters

The SolaX X1 Hybrid 7.5kW G4 is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The Gen4 has been designed and developed using the very latest solar technology. SolaX  have pushed back the boundaries for what is possible when designing a storage inverter. The ground-breaking SolaX X1 Hybrid 7.5kW G4 is an inverter that can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. In-built EPS changeover switch Supports up to 150% PV oversizing and 110% overload output Can work at full capacity down to -35C 97.0% Charge/discharge efficiency On-grid and off-grid use 5 work modes, 2 charging periods available IP65 protection level CT compatible, loads respond within 0.3s 30 Minute Total Installation Time Includes WiFi Dongle

Read more less

Part No: X1-HYBRID-G4-3.7-V2 Storage Systems - Hybrid Inverter G4-V2 HV Single Phase Hybrid Inverter and Charge controller  This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment   Supplier Part No: X1 G4- Hybrid 3.7 D with Wi-Fi Weight: 24 kg Rated Power: 3,680 W Min PPT Voltage: 70 V Max PPT Voltage: 550 V DC Startup Voltage: 90 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years    

Read more less

This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 5.0 D with Wi-Fi Weight: 24 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years  

Read more less

The X3-ULTRA is a versatile 3ph hybrid inverter that includes inversion, solar charging, and battery charging. The X3 ULTRA series can be used with different capacities of SolaX battery. The X3 Ultra can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. AC attributes Max power: 22000W Max current: 31.9A Number of phases: 3 DC attributes Number of MPPT 3 V range of MPPT 160-950V Max power 40kW Max voltage 1000V Start up voltage 200V System Max efficiency 99.7% IP rating IP66 Weight 47kg Dimensions 696 x 529 x 240 mm CommunicationWarranty 5 years Key features Max. 36A DC input per MPPT 3 MPPT, 6 Strings 100% Unbalanced Output AI-Driven Energy Management

Read more less

Part No: X3-HYBRID-G4-8.0-V2 Storage Systems - Hybrid Inverter Superseding the extremely successful X-Hybrid generation 3, the newest X-Hybrid generation 4 has been designed and developed using the very latest solar technology. SolaX has pushed back the boundaries for what is possible when designing a storage inverter. High-Efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment PLEASE NOTE: We are still awaiting some documents from SolaX for this range - these will be uploaded as soon as they are received.   Supplier Part No: X3-HYBRID-8.0-D G4.2 (wifi incl) Weight: 30 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

The SolaX X1 Mini 2.0kW Single Phase Solar Inverter is a market-leading product offering the perfect balance between performance, reliability, functionality, price and length of warranty. This SolaX X1 Mini 2.0kW inverter boasts a wide MPPT voltage range to allow for more energy harvesting and have a maximum input voltage of 450V, with a maximum efficiency of 98%. SolaX Power single phase inverters are IP66 rated, have no internal fan and come with optional ‘plug & play’ WiFi. Low Start Up Voltage Small & Lightweight Max Efficiency Up To 98% IP66 Rated Standard 10 year warranty, with option to extend to 20 years. Register your warranty here: https://www.solaxcloud.com/#/warranty The SolaX X1 Mini 2.0kW single phase solar inverter includes a built in DC switch as standard. Small, Lightweight & Quiet The X1 Mini has been designed to be installed in the smallest of spaces. It has a footprint of only 32.8cm and weighs in at only 6KG. The X1 Mini is small but it is not lacking in performance.   Brand SolaX Power Protection Class IP66 Dimensions 26.7 x 32.8 x 12.6 Weight 6 Warranty 10 Years

Read more less

Description The Solax X1 mini range has been designed to fit in to smaller spaces than standard inverters. With a maximum input voltage of 450V and a maximum efficiency of 98%, this product has can boast perfirmance, reliability and functionality along side its compact size. Small and light Max. DC input 14A AC/DC built in SPD As low as 45V grid-connected PV voltage Remote upgrade and control Wider power section Zero injection supported CT compatibility Technical specification kW Rating 0.7 kw Years Guaranteed 5 Width 257 mm Standards MetIEC61727, EN50549, G98/G99, AS 4777.2, VDE4105, CEI 0-21, RD1699, UNE 206007-1, VFR Length116mm Height328mm Supplier Part NumberX1-0.7 Manufacturer Model NoX1-0.7-S-D Brand NameSolax

Read more less

Solax X3 MEGA G2 60kW 3ph solar inverter, which delivers up to 98.4% efficiency and a maximum input voltage of 1100V as well as outstanding energy performance with its wide MPPT voltage range, enhancing power yield. The Solax X3 Mega G2 is IP66 rated, and equipped with safety and security features such as Arc-fault circuit                                                 interrupter and SPD protection.  AC attributes Max rated power: 60kW Max rated current: 87A Number of phases: 3 DC attributes Max power 90kW Max Isc currentMPPT range 46A180-1000V Max voltage 1100V Start up voltage 200V System Max efficiency 98.4% IP rating IP66 Weight 44.5kg Dimensions 630 x 521 x 286mm Key features IP66 ProtectionAFCI ProtectionOver current and temperature protectionOver/under voltage protectionBuilt-in export power control

Read more less

Solax X3 MEGA G2 50kW 3ph solar inverter, which delivers up to 98.4% efficiency and a maximum input voltage of 1100V as well as outstanding energy performance with its wide MPPT voltage range, enhancing power yield. The Solax X3 Mega G2 is IP66 rated, and equipped with safety and security features such as Arc-fault circuit                                                 interrupter and SPD protection.  AC attributes Max rated power: 50kW Max rated current: 72.5A Number of phases: 3 DC attributes Max power 75kW Max Isc currentMPPT range 46A180-1000V Max voltage 1100V Start up voltage 200V System Max efficiency 98.4% IP rating IP66 Weight 44.5kg Dimensions 630 x 521 x 286mm Key features IP66 ProtectionAFCI ProtectionOver current and temperature protectionOver/under voltage protectionBuilt-in export power control

Read more less

The X3-FIT G4 15kW is a 3-phase AC coupled inverter designed by SolaX. Once your load supply is satisfied by the power generated from your solar panels, the intelligent SolaX X3 Retro Fit will direct excess energy into your battery, ready for later use. Additionally this AC coupled inverter can act as a backup power supply should your home experience a loss of power. The X3 Retro Fit will then send the stored power back to the home, ensuring you are never left in the dark even during a power-cut. VPP Function EPS Switchover Time <10ms with up to 150% output for 60s Max. 110% nominal apparent AC power Flexible Peak Shaving Compatible with WiFi V2.0 Optional three-phase unbalanced output For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. Additionally, the Solax CHINT three phase CT energy meter is recommended. AC attributes Max power: 15000W Max current: 24.1A Number of phases: 3 System Max efficiency 98% IP rating IP65 Weight 30kg Dimensions(H*W*D)  503*503*199mm

Read more less

The X3-ULTRA is a versatile 3ph hybrid inverter that includes inversion, solar charging, and battery charging. The X3 ULTRA series can be used with different capacities of SolaX battery. The X3 Ultra can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. Additionally, the SolaX CHINT three phase CT energy meter is recommended. AC attributes Max power: 30000W Max current: 39.9A Number of phases: 3 DC attributes Number of MPPT 3 V range of MPPT 160-950V Max power 60kW Max voltage 1000V Start up voltage 200V System Max efficiency 98% IP rating IP66 Weight 47kg Dimensions 696 x 529 x 240 mm CommunicationWarranty 5 years Key features Max. 36A DC input per MPPT 3 MPPT, 6 Strings 100% Unbalanced Output AI-Driven Energy Management

Read more less

Part No: X3-PRO-25K Inverters - Main Units Rating: 25,000W Phases: 3 X3-Pro-25K G2 High-Effi­ciency Maximum effi­ciency is up to 98.5% Low start up voltage, ultrawide MPPT voltage range 150% oversizing, 110% overloading output Built-in shadow tracking function Safe SPD type II protection both AC&DC ARC protection (Optional) IP66 protection Smart Built-in export power control Intelligent load management - heat pump (Optional) 24 hours operation monitoring Multiple monitoring methods, Pocket WiFi/LAN/4G (Optional) Economic Ultra-high power density Maximum 16A DC input current, support high power solar panel Up to 3 MPPTs, 2 strings per MPPT When installing under G100 there is a requirement to install Solax Chint Three Phase Meter to be compliant.   Supplier Part No: X3 PRO 25kW G2 Weight: 28 kg Rated Power: 25,000 W Min PPT Voltage: 200 V Max PPT Voltage: 960 V DC Startup Voltage: 200 V DC Shutdown Voltage: 180 V Max Input Voltage: 1,000 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 27,500 W Max DC Current: 32 A Max DC Inputs: 0 Has DC Fuses: 0 Connector: MC4   Included Connectors: 6 Euro Efficiency: 98 % Transformer: None MPPT Quantity : 6 Has Integrated DC Switch: No Warranty: 10 years

Read more less

 Part No: X3-8000T Storage Systems - Hybrid Inverter X3-HYBRID-5.0T / X3-HYBRID-6.0T / X3-HYBRID-8.0T / X3-HYBRID-10.0T X3-Hybrid HV Three Phase   The new X3-Hybrid High-Voltage is the latest incarnation in battery storage inverters from SolaX. The X3 ranges in size from 5 to 10kW and has the ability to install multiple inverters in parallel . It’s equipped with a built-in EPS (Emergency Power Supply), has multiple communication options (additional Wifi or LAN sticks can be purchased separately) and can be controlled remotely using the SolaX monitoring app, X-Cloud.   Additional features: Unbalanced phase load supported Up to 25.2kWh storage per inverter Up to 10kW Max charge/discharge G100 Export Limitation compliant Suitable for grid trading applications Charging from grid possible Fanless design Please note the minimum number of batteries per X3 Hybrid inverter is 2 and maximum of 4. Please note batteries need to be the same capacity, it’s not possible to connect both 4.5kWh and 6.3kWh to one inverter.   Please note this inverter is not EN50438 IE certified for Ireland.  Supplier Part No: X3-Hybrid 8.0E Weight: 48 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 180 V Max Input Voltage: 1,000 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 24 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years Data Sheet Solax X3 Hybrid EN

Read more less

Part No: X3-MEGA-50K Inverters - Main Units Rating: 50,000W Phases: 3 X3-MEGA-50K Superior Efficiency Max efficiency 98.3%, European efficiency 98.0% 4 independent MPPTs ECO Invention patent technology High Reliability Top-ranking high quality components Integrated type II DC &AC surge arresters Intelligent Maintenance Intelligent monitoring via APP & Web Multiple-string monitoring for easy trouble shooting (Optional) Excellent Grid Compatibility Advanced grid impedance algorithm for large-scale power stations Active power/reactive power control option (Remotely) UK ONLY: Due to a slight change in the regulations relating to G98 and G99, some manufacturers have had to resubmit their type test certificates for reassessment with the ENA. This may lead to some delays in the processing of applications, but we have been reassured by manufacturers they do not anticipate this to delay applications beyond a few weeks. Segen have not been involved in this process and are unable to provide timescales or dates as to when this works will be completed. Due to our current high volume of calls we would kindly ask you to refrain contacting your AM regarding these timescales. Supplier Part No: X3 Mega 50kWWeight: 65 kgRated Power: 50,000 WMin PPT Voltage: 200 VMax PPT Voltage: 960 VDC Startup Voltage: 200 VDC Shutdown Voltage: 250 VMax Input Voltage: 1,000 VMax DC Power: 65,000 WMax AC Power (5 Minutes): 50,000 WSurge AC Power (1 Second): 55,000 WMax DC Current: 130 AMax DC Inputs: 3Has DC Fuses: 0Connector: MC4Included Connectors: 2Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years Click Here For Specs 

Read more less

Part No: X3-HYBRID-G4-15.0-V2 Storage Systems - Hybrid Inverter SolaX's X-Hybrid three-phase inverter is the most updated version of their hybrid inverters range. This adaptable and expandable device caters to residential and commercial purposes, with the possibility to incorporate several inverters in parallel allowing for scalable battery storage used in commercial settings. The inverter also comes with a feature called EPS (Emergency Power Supply), which utilizes extra changeover devices. Multiple communication options are available, and the device can be controlled remotely. Some of its significant features are maximum efficiency of 98%, dual MPTT, remote monitoring, an IP65 rating, and a 10-year warranty. Key features: In-built EPS changeover switch Supports up to 150% over-sizing 30A Charge/discharge capability On-grid and off-grid use Includes WiFi dongle Looking to expand your system capacity? See Solax EPS Parallel Box options  – Connect up 6 hybrid inverters with a maximum of 60kW – Connect up 10 hybrid inverters with a maximum of 150kW Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid 15.0-D G4 V2 with WiFi Weight: 30 kg Rated Power: 15,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 15,001 W Surge AC Power (1 Second): 15,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Part No: X3-HYBRID-G4-10.0-V2 Storage Systems - Hybrid Inverter High-efficient 150% PV oversized and 110% overload output Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking functio Economic Maximum 16A DC input current, support for high power solar panel Store the surplus energy from PV to battery Low start output voltage makes inverter longer working time Less energy loss on battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment Supplier Part No: X3-Hybrid G4 10.0 V2 with Wi-Fi & CT Weight: 34 kg Rated Power: 10,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 180 V DC Shutdown Voltage: 0 V Max Input Voltage: 950 V Max DC Power: 10,000 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 10,002 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 0 Euro Efficiency: 97 % Transformer: HF MPPT Quantity : 0 Has Integrated DC Switch: No Data Sheet X3 G4

Read more less

This is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The X-Hybrid is can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. AC attributes Max power: 12000W Max current: 19.3A Number of phases: 3 DC attributes Max power 18000W Max Isc current 20A Max voltage 1000V Start up voltage 200V System Max efficiency 98% IP rating IP65 Weight 30kg Dimensions 503*503*199mm Key features In-built EPS changeover switch Supports up to 150% oversizing Can work at full capacity down to -35C 30A Charge/discharge capability On-grid and off-grid use Includes WiFi dongle

Read more less

The X1-FIT G4 5.0kW W allows you to generate energy from your solar panels during the day and directs excess energy to the battery, ready for later use. In the event of a power cut the X1 FIT 'W' will use the stored power and act as an emergency power supply (EPS). For G100 Applications, please contact SolaX to perform a software update remotely when the product is installed. Additionally, the SolaX CHINT single phase CT energy meter is recommended. Key Features: VPP Function Remote Upgrade and Control Max. 110% nominal apparent AC power Flexible Peak Shaving Compatible with WiFi V2.0   AC attributes Max power: 5000W Max current: 40A Number of phases: 1 System Max efficiency 97% IP rating IP65 Weight 23kg Dimensions 482*417*181mm  

Read more less

 Part No: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Supplier Part No: X1-FIT-5.0 Charger G4 Weight: 24.5 kg Rated Power: 5,000 W Data Sheet Solax X1 Fit EN

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Three MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.4kg Five-year standard warranty

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Three MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.4kg Five-year standard warranty

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Three MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.4kg Five-year standard warranty

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Two MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.2kg Five-year standard warranty

Read more less

Key features: Hybrid inverter for use with the IES battery and battery management system to create an all-in-one system Easy, plug-and-play installation Modular design means battery capacity is expandable up to four batteries Intelligent functionality such as AI-ready forecasting of solar generation and home consumption, and micro-grid feature to support on-grid and off-grid operation Intelligent load management for heat pumps and EV chargers Two MPP trackers with 1 string per tracker Maximum 200% oversize and 200% PV input power Maximum 20A DC single-string input current to support high-power solar panels Low start-up voltage offers longer operation time Inbuilt shadow tracking function Maximum charge/discharge current up to 50A Back-up functionality with switchover time under10ms (UPS level), up to 200% EPS output for 10s Ingress protection rating: IP66 Weight: 26.2kg Five-year standard warranty

Read more less

Part No: X1-3000T Storage Systems - Hybrid Inverter X1-Hybrid HV Single Phase The third generation of the X1-Hybrid Storage Inverter is the latest to be released from SolaX and has a range of new features such as built-in EPS output that enables the end user to run off their batteries in the event of a power cut, Export Control making it possible to limit exported power and advanced connectivity making it suitable for grid-trading applications. Other features like easy remote access with monitoring using the SolaX app – Xcloud, makes it very user (and installer) friendly while the industry-leading 10-year warranty gives great peace of mind. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately G100 Export Limitation compliant Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Please note the minimum number of batteries per X1 Hybrid inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria.   Supplier Part No: X1-Hybrid 3000E Weight: 26.9 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,300 W Surge AC Power (1 Second): 6,000 W Max DC Current: 24 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 10 years Data Sheet Solax X1 G3 Hybrid 2021

Read more less

This is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The X-Hybrid is can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. AC attributes Max power: 7500W Max current: 32.6A Number of phases: 1 DC attributes Max power 10000W Max Isc current 16A Max voltage 550V Start up voltage 90V    

Read more less

This is the 4th generation of the SolaX Hybrid range, retaining all the key features of the 3rd generation while making some welcome improvements. The X-Hybrid is can also store surplus energy in batteries for later use. It is important to understand that this is a hybrid solar PV inverter and battery storage controller. This means it needs to be sized just like a regular inverter would be and, if it is being retrofitted, will replace the existing inverter. AC attributes Max power: 6000W Max current: 28.6A Number of phases: 1 DC attributes Max power 9000W Max Isc current 16A Max voltage 550V Start up voltage 90V    

Read more less

 Part No: X1-AC-3.6 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland. Supplier Part No: X1-AC-3.6 Charger Weight: 18 kg Rated Power: 3,680 W Data Sheet Solax X1 AC coupled

Read more less

Part No: X1-AC-3.0 Storage Systems - Charger-Inverter X1 AC Charger Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 7.5kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All Segen stock meets that criteria. Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland.   A LOT BETTER VALUE IF BOUGHT AS A PACKAGE   Supplier Part No:X1-AC-3.0 Charger Weight:18 kg Rated Power:3,000 W

Read more less

This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time, you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 3.0 D with Wi-Fi Weight: 24 kg Rated Power: 3,000 W Min PPT Voltage: 70 V Max PPT Voltage: 550 V DC Startup Voltage: 90 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 9,000 W Max AC Power (5 Minutes): 4,500 W Surge AC Power (1 Second): 4,501 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

Part No: X1-HYBRID-G4-5.0 Storage Systems - Hybrid Inverter G4 HV Single Phase Hybrid Inverter and Charge controller range This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C Please note Segen are currently stocking the G4-D version which is not compatible with the Matebox. Price reduced from £725.30 on 24/10/2024 Supplier Part No:X1 G4- Hybrid 5.0 DWeight:28 kgRated Power:5,000 WMin PPT Voltage:125 VMax PPT Voltage:550 VDC Startup Voltage:125 VDC Shutdown Voltage:125 VMax Input Voltage:600 VMax DC Power:7,500 WMax AC Power (5 Minutes):5,500 WSurge AC Power (1 Second):5,501 WMax DC Current:28 AMax DC Inputs:2Has DC Fuses:0Connector:SUNCLIX  Included Connectors:2Euro Efficiency:97 %Transformer:NoneMPPT Quantity :2Has Integrated DC Switch:NoWarranty:5 years

Read more less