Inverters

Part No: SUN2000-LUNA-5KWh Storage Systems - Li-ion Battery Pack This part is made up of the following items: Huawei LUNA 5KWh battery module only Huawei LUNA Power Module BMS Smart String Energy. This is the complete 5KWh Luna Battery. Product Features Flexible due to 5KWh that can be easy scaled from 5KWh to 30KWh 100% DOD pack level energy optimization Easy to install due to 12Kg power module and 50Kg battery module Lithium Iron Phosphate cells resulting is safe and reliable battery Auto Detected by battery Compatible with single and 3 Phase inverters Battery fault on module auto isolates to keep system safe battery module is 5 KWh per module  this consists of 1 x battery module and 1 x power module Nominal voltage of battery is 600VDC max output per module is 2500W 10 year warranty max is 2 x systems in parallel RS485 BMS communication  IP66 Weight: 71 kg Battery Type: Lithium Ion Nominal Energy: 5000 Wh Depth of discharge: 100.00 % Voltage: 600 V Continuous Discharge Rate (Normal Use): 2500 W Maximum Discharge Rate (5 Minutes): 2500 W Surge Discharge Rate (15 Seconds): 2500 W Maximum Charge Rate (5 Minutes): 2500 W Data Sheet Huawei Luna

Read more less

Part No: GIV-HY3.6 Storage Systems - Hybrid Inverter  GivEnergy hybrid inverters is a must for every house hold where you have backup power during power outages as well as saving on your utility bill. This unique hybrid utilizes the free giving sunlight and makes it an flexible power source that is available when you need it as well as direct battery charge from your PV array. System needs to be connected to the internet to comply with warranty requirements. Product Features Uses GivEnergy Lithium batteries that can be added to extend KWh of battery bank Batteries can be charged from Solar PV as well as your current utility supply Cloud based monitoring and control through WEB APP interface Inverter can be remotely updated Via Wi-Fi /4G dongle Inverter do have 2500W backup power capability Available in 3.6KW and 5KW Inverter has 2 MPPT PV inputs that allow you to have solar panels in 2 different orientations Installations can be for new installs or retrofit to an existing system Backup function supported Please Note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact GivEnergy before going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with GivEnergy for details.   If fitted by non-trained installer the Warranty will be VOID!  Givenergy system must be connected to the internet to benefit from full warranty services.   Supplier Part No: 3.6kW Hybrid inverter Weight: 33 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 100 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,679 W Surge AC Power (1 Second): 3,680 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 99.5 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No

Read more less

Part No: SUN3KTL-L1 Storage Systems - Hybrid Inverter Huawei Fusion Home SUN2000L1 - 3/ 3.68 / 5 /6KTL The Smart Energy Controller (SUN2000- 3 / 3.68 / 5 / 6KTL-L1) is Huawei new single-Phase inverter and is direct compatible with their own Huawei Luna battery Product Features Direct compatible with Luna battery and is Plug and Play and no extra devices is needed AI Self leaning new arc detection Is compatible with the Sun2000-450W-P optimizer Simple commissioning by APP Auto-detection of system equipment Registering your plant by scanning any device Energy Flow illustration Real-time data at anytime and anywhere Performance data back-up Physical & logical module layout Module -level performance monitoring Smart I-V Diagnosis Smart dongle Plug and Play (LAN or 4G dongle available) Smart dongle support up to 10 inverters IP65 Can be installed without batteries as 'battery ready' Max 3 batteries per inverter Supplier Part No: 01075350 Weight: 12 kg Rated Power: 3,000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 3,301 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: Yes. Data Sheet Huawei L1 Installation Manual Huawei L1 - Quick guide

Read more less

Part No: SOL-S6-EA1P5K-L Storage Systems - Charger-Inverter Solis Single Phase Low Voltage AC-Coupled Inverters   S6-EA1P(3.6-6)K-L series is a new generation of AC coupled products, designed to provide photovoltaic energy storage upgrading solutions for the built grid-tied system, so that it has energy storage and emergency power supply capabilities. Supports Peak Shaving Mode Industry leading to a max 125A/6kW max charge/discharge rating Provide intelligent time of use solution together with the monitoring group Increased battery protection and operation features to extend battery life Real-time battery monitoring, remote upgrade, and battery healing function to prolong battery life 40-60V battery voltage range 19.9kg weight  1P66 Ingress protection 

Read more less

Part No: SOL-RS485-PLUGS Display - Web Interfaces Solis RS485 Comm Plugs to use to connect the communication port comes in a pack of 5. 

Read more less

Part No: SOL-5G-5.0-DY-DL5.0C-10.24 Storage Systems - Grid Backup Packages This part is made up of the following items: 2 x DY-DL5.0C-H Dyness DL5.0C 5.12kWh LV LFP Battery with Heated Cells   1 x SOL-5K-RHI-48ES-5G-DC EH1 Solis Energy Storage 5kW Hybrid 5G Inverter with DC switch   1 x DY-DL5.0C-STACKBRACKET Dyness DL5.0C - Stacking Bracket for up to 6 units   1 x KETO-00 Jean Muller Fuse-switch-disconnector KETO size 00 body (battery isolator)   2 x N5014607-125A.   NH Fuse-link 125A for KETO-00  

Read more less

Compatible Products Hanchu High Voltage Battery 9.4kWh Hanchu High Voltage Battery 9.4kWh - BMS   Ultra Performance Exceptional Efficiency Achieves up to 98.8% peak efficiency, maximising the conversion of generated energy into usable power and significantly reducing energy costs. Robust Power Handling Supports up to 110% AC output overloading and up to 120% back-up output overloading for 60 seconds, ensuring reliable performance even during peak demand. Advanced Multi-MPPT Support Equipped with 4 MPPTs, enabling optimal solar energy capture across multiple roof orientations and shading conditions to maximise overall solar utilization. Reliable Operation Ultra-Fast Switching Time With EPS switching time of less than 20 milliseconds, it ensures continuity of critical operations without interruption during power outages. Broad Voltage Compatibility Supports an extensive battery voltage range from 135V to 750V, making it compatible with various high-voltage battery systems for greater versatility. Comprehensive Safety Protection Offers built-in surge protection, insulation resistance monitoring, and multi-layered safeguards against over-temperature and residual currents, ensuring protection for both the equipment and the premises. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Installation The horizontal design and quick plug-in terminals enable fast and convenient installation, minimising labour time and reducing complexity. Advanced Connectivity Offers simple configuration through WiFi via the iESS platform, streamlining setup and integration into existing systems. PV Input Max. PV array power : 54.0kW Max. input voltage : 1000V MPPT voltage range / rated input voltage : 200-850V Min. input voltage / start voltage : 135V No. of independent MPPT trackers / strings per MPPT input : 4 Max. input current per MPP tracker : 30A Max. short-circuit current per MPP tracker : 40A Battery Input Nominal battery voltage : / Battery voltage range : 135-750V Max. charging / discharge power : 36000W Max. charging current / Max. discharging current : 100A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 36.0kW Max. apparent power : 39.6kVA Rated grid output current (@230V) : / Max. grid output current : 60.0A AC Input Rated grid voltage : 3L/N/PE;220/380V;230/400V;240/415V Rated apparent power : 36.0kW Max. input apparent power from grid : 43.5kVA Rated input curent from grid : / Max. input current from grid : / EPS Output Nominal output voltage : 3L/N/PE;220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 36.0kW Max. output apparent power : 33.0kVA Peak output apparent power : 43.5kVA | 60S Max. output current : 60.0A Max. switch time : ＜20ms Efficiency MPPT efficiency : 98.80% Euro efficiency / Max. efficiency : 98.30% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 800*620*300 Device weight : 76.0Kg Operating temperature range : -30℃~+60℃ Noise emissions (typical) : ＜50dB Standby consumption : ＜15W Degree of protection (as per lEC 60529) : IP65 Features User interface : OLED&LED&APP Communication with BMS : / Communication with meter : / Communication with portal : / Other communication : / Communication : RS485/CAN/WiFi/LAN(Optional) Integrated power control / Zero export control : Integrated/Integrated Certifications : IEC 62109/EN 61000/EN 50549-1/NTS/VDE-4105/G99/G100/CEI/NRS 097/CEI 0-21/NEN Warranty : 12 years

Read more less

If a secondary CT is required for Fox installation, this product can be used for that requirement. This CT is compatible with the AC charger and 3PH Hybrid.

Read more less

Part No: X1-HYBRID-G4-3.7-V2 Storage Systems - Hybrid Inverter G4-V2 HV Single Phase Hybrid Inverter and Charge controller  This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment   Supplier Part No: X1 G4- Hybrid 3.7 D with Wi-Fi Weight: 24 kg Rated Power: 3,680 W Min PPT Voltage: 70 V Max PPT Voltage: 550 V DC Startup Voltage: 90 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Max DC Current: 32 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years    

Read more less

Product Features Max. efficiency 97.7% String current up to 18A/32A Compact and lightweight Wide voltage range and low startup voltage 2 MPPT design with precise MPPT algorithm Integrated Export Power Manager (EPM) AFCI protection, proactively reduces fire risk Friendly and adaptable connection to the grid Manufacturer        Solis Phases         1 Phase Inverter Type          String Inverter Commodity Code         85044086 Dimensions (mm) (H x W x D)543 x 310 x 180

Read more less

Click Here To Register For The On-line Installation Training Course INCLUDED IN PACKAGE:   7.6KW HYBRID INVERTER 3.3 KWH BATTERIES X 4 TOP COVER FLOOR BASE WIFI DONGLE SMART METER INTERNAL DC BREAKER HYBRID INVERTER 7.6KW Max DC input 10kwp 7600W nominal AC output power IP67 rating Dimensions (W x H x D)mm 600  x 1435 x 243 10  year warranty BATTERIES 13.3kW OF POWER FROM THE 4 x BATTERIES COMBINED DOC 100% VOLTAGE RANGE 30v - 43.8v WEIGHT OF EACH BATTERY: 35kg IP RATING: IP67 INTEGRATED PROTECTION Battery Input Reverse / Polarity Protection Over load Protection (DC-AC side) AC Short Circuit Current Protection / Output Short Protection Output Over Current Protection DC (PV+Battery) Short Circuit Current Protection AC Surge Protection (SPD -Type) Output Over Voltage Protection Grid and Back-up (SPD Type II) Anti Islanding Protection PV String Input Reverse Polarity Protection Ground Fault Monitoring Temperature Protection (Inverter + Battery) Integrated DC Switch (PV - Disconnector) Emergency Stop WARRANTY Inverter: 10 YearsBattery:   >80% Capacity 10 Years / 6000 cyclesAccessories: 2 Years

Read more less

Part No: FE-AC3-10.0-E Storage Systems - Charger-Inverter  Fox ESS 3 Three-Phase AC Inverter - 10.0kW Features: Uses high voltage IP65 batteries FOX CUBE (1 MASTER + 2 SLAVE Minimum, up to 6 Slaves Maximum) Easy Installation: Flexiblke configuration, plug and play set-up, built-in fuse protection High Voltage: Connects to high-voltage batteries for maximum round-trip efficiency IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal PLEASE NOTE: This product requires the following meter for full operation: FE-3PH-METER-CT  Supplier Part No: AC3-10.0 (with EPS) Weight: 28 kg Rated Power: 10,000 W

Read more less

Part No: FE-H3-12.0-CT Storage Systems - Hybrid Inverter This part is a special offer made up of the following items: Part   1 x FE-H3-12.0 FOX ESS H3 10.0KW 3PH Hybrid Inverter   1 x FE-3PH-METER-CT Fox CT Meter (compatible with AC, HY & AIO ranges)   Includes FE-3PH-METER-CT Harness the power of the sun day and night with FoxESS' groundbreaking line of hybrid inverters. Easy installation - Plug & Play, built-in fuse protection. Maximum yields - Low starting voltage, 97.3% maximum efficiency Maximum flexibility - 3 battery types to choose from, True 3-phase backup power Monitoring - Monitor remotely via app or web portal. FoxESS inverters are configurable with the following batteries: FoxESS inverters are configurable with the following batteries: 1x FE-HV-BMS + (4-8)x FE-HV-2600 1x ECM-2900 (Master) + 2-6x ECS-2900 (Slave) 1x ECM-4100 (Master) + 2-6x ECS-4100 (Slave) 1x ECM-4300 (Master) + 2-6x ECS-4300 (Slave) 1x ECM-4800 (Master) + 2-6x ECS-4800 (Slave) FoxESS inverters are not compatible with SolarEdge or Huawei optimizers, but with those from Tigo. 3PH Smart Meter included in packaging. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. PLEASE NOTE: This product requires the following meter for full operation: FE-3PH-METER-CT  Weight: 28 kg Rated Power: 12,000 W Min PPT Voltage: 160 V Max PPT Voltage: 950 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 15,000 W Max AC Power (5 Minutes):  12,000 W Surge AC Power (1 Second): 13,200 W Max DC Current: 26 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 98 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-H3-10.0-CT Storage Systems - Hybrid Inverter This part is a special offer made up of the following items: Part   1 x FE-H3-10.0 FOX ESS H3 10.0KW 3PH Hybrid Inverter   1 x FE-3PH-METER-CT Fox CT Meter (compatible with AC, HY & AIO ranges)   Includes FE-3PH-METER-CT Harness the power of the sun day and night with FoxESS' groundbreaking line of hybrid inverters. Easy installation - Plug & Play, built-in fuse protection. Maximum yields - Low starting voltage, 97.3% maximum efficiency Maximum flexibility - 3 battery types to choose from, True 3-phase backup power Monitoring - Monitor remotely via app or web portal. FoxESS inverters are configurable with the following batteries: FoxESS inverters are configurable with the following batteries: 1x FE-HV-BMS + (4-8)x FE-HV-2600 1x ECM-2900 (Master) + 2-6x ECS-2900 (Slave) 1x ECM-4100 (Master) + 2-6x ECS-4100 (Slave) 1x ECM-4300 (Master) + 2-6x ECS-4300 (Slave) 1x ECM-4800 (Master) + 2-6x ECS-4800 (Slave) FoxESS inverters are not compatible with SolarEdge or Huawei optimizers, but with those from Tigo. 3PH Smart Meter included in packaging. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. PLEASE NOTE: This product requires the following meter for full operation: FE-3PH-METER-CT  Weight: 28 kg Rated Power: 10,000 W Min PPT Voltage: 160 V Max PPT Voltage: 1,000 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 13,000 W Max AC Power (5 Minutes):  10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 26 A Max DC Inputs: 3 Has DC Fuses: 1 Connector: MC4   Included Connectors: 6 Euro Efficiency: 98 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Part No: FE-KH1-10.5 Storage Systems - Hybrid Inverter The FoxESS KH10.5 is easy to install, saving you valuable time on site. The FoxESS Cloud allows for easy remote monitoring and control, making it a breeze to support remotely.  FoxESS KH10.5 Features Compatible with: ECS2900  Compatible with: ECS4100  Compatible with: ECS4800  Compatible with: HV2600  IP65 rated solution - suitable for outdoor installations Remote monitoring via web portal or smartphone with included Wi-Fi dongle Natural cooling - ensure quiet operation Quad MPPT - optimal solar production Built in Type II AC & DC surge protection Register here for a free extra 5-years warranty! CT clamp is included in the box for zero export control. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. The FoxESS KH10.5 is NRS certified.   Supplier Part No: KH10.5 Weight: 29 kg Length: 0.62 m Rated Power: 10,500 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4   Included Connectors: 8 Euro Efficiency: 97.4 % Transformer: None MPPT Quantity : 4 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Product description Sunsynk 3ph 10K Hybrid Inverter solar & wind Inverter #5: SYNK-10K-SG04LP3 The Sunsynk Three-Phase Hybrid Storage Inverters are highly efficient power management tools for three-phase grid applications. These inverters allow the user to control power flow from multiple sources such as solar, main electrical grids, and generators, and effectively store and deliver electric power to your applications.These amazing three-phase inverters have a unique feature. They can operate and balance the load, which means you can have 20% connected to one phase, 20% to another, and 60% to the third phase, and it still gives perfect phase rotation. No other inverter in their class can offer this feature.Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  

Read more less

Part No: EN-S-WB-230-UK Inverters - Micro Inverter Gateway The Enphase Envoy-S Standard communications gateway delivers solar production data to Enphase Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System. With multiple powering and connection options, Envoy-S Standard allows for greatest installation flexibility.    All Enphase systems must be connected to the internet and registered within 45 consecutive days following the warranty start date in order to be covered. Please note due to shortage of Envoy S Standard units, you might receive a Metered version with CTs and without UK plug. The functionality of product is exactly the same, but the unit will need to be hardwired.   Supplier Part No: ENV-S-WB-230 Weight: 1.07 kg

Read more less

Details The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation.The dedicated Sunsynk Connect Platform enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.From the pre-set factory settings to the in-built connection ports, the Sunsynk Lifelynk X 3.6kW SUN-LIFE3.6X-HYB Hybrid Inverter has been designed with convenience and hassle-free installation in mind. Features: Small and Mighty - An ideal solution for smaller properties, social housing and local government projects Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit EPS Function - Includes option for 3.6kw Output for Essential Loads Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket Plug and Play - Get up and running quickly Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind Maximum Power Output - 3600w Dimensions - 700.6 x 534.6 x 182.2mm Weight - 57.4kg This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid     Manufacturer.       Solis Phases.      1 Phase Power Rating.      kW3.6 Inverter Type.     String Inverter Built in DC.       Yes No. of MPPT.        1 Built in Communication.       Optional Commodity Code.           85044085 Dimensions          (mm) (H x W x D)373 x 310 x 160

Read more less

Part No: EN-IQ8MC-72-M-INT-3PH Inverters - Micro Inverter Units Rating: 330W Phases: 3 This part is made up of the following items: 1 x EN-IQ8MC-72-M-INT Enphase IQ8MC 54 to 72-cell Microinverter 330VA peak power MC4   Supplier Code: IQ8MC-72-M-INT Three Phase  Phases: 1 or 3 (depending on wiring) MPP Tracker: 1 Inputs per Tracker: 1 Rated AC power: 330VA MPPT Voltage Range: 25 - 45 V Warranty: 25 Years Technical Specification  Input current: 14 A Short-circuit current: 25 A Connectivity: With the help of the Envoy WLAN/Ethernet and app-enabled   

Read more less

Part No: X3-HYBRID-G4-8.0-V2 Storage Systems - Hybrid Inverter Superseding the extremely successful X-Hybrid generation 3, the newest X-Hybrid generation 4 has been designed and developed using the very latest solar technology. SolaX has pushed back the boundaries for what is possible when designing a storage inverter. High-Efficiency 150% PV oversized and 110% overload output. Maximum 150% overload output Higher efficiency on charging and discharging, up to 97.5% Built-in shadow tracking function Economic Maximum 16A DC input current, support for high power solar panels Low start output voltage Less energy loss from battery to inverter Intelligent Switchover time <10ms Quick configuration with U-disk Lithium & Lead-acid battery compatible CT compatible, loads respond within 0.3s Intelligent loads management(e.g., Heat pump) On & Off-grid parallel function, up to 150kW 5 work modes, 2 charging periods available VPP ready, ancillary service in power market Three-phase unbalanced output 50% nominal output power on single phase at most Wi-Fi is now included with Solax X3-Hybrid-G4 V2 product so no need to purchase additional Wi-Fi equipment PLEASE NOTE: We are still awaiting some documents from SolaX for this range - these will be uploaded as soon as they are received.   Supplier Part No: X3-HYBRID-8.0-D G4.2 (wifi incl) Weight: 30 kg Rated Power: 8,000 W Min PPT Voltage: 180 V Max PPT Voltage: 950 V DC Startup Voltage: 200 V DC Shutdown Voltage: 200 V Max Input Voltage: 950 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,001 W Surge AC Power (1 Second): 8,002 W Max DC Current: 26 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years

Read more less

2 x MPPT and 4 DC input at max of 26A 3 x operation modes Self-consumption; time of use; off-grid backup 4 models range from 5KW to 10 KW output as well as backup Supporting Li-ion high voltage batteries ranging from 160 to 600VDC Time of use shifting peak shaving capabilities to grid Max. efficiency is 98.4% Communication: RS485; CAN; WiFi Compatible with lithium ion solar batteries; battery voltage range: 160~600V Intelligent EMS function Supporting three-phase imbalance 24-hour monitor and management system Remotely control and upgrade any selected inverter 5 years standard warranty Manufacturer      Solis Phases      3 Phase Power Rating         kW8 Inverter Type        Hybrid Inverter Built in DC       Yes No. of MPPT        2 Built in Communication      Optional Commodity Code        85044086 Dimensions (mm) (H x W x D).    455 x 535 x 181 Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world.

Read more less

Manufacturer       Solis Phases       3 Phase Power Rating       kW10 Inverter Type         Hybrid Inverter Built in DC         Yes No. of MPPT        2 Built in Communication        Optional Commodity Code          85044086 Dimensions (mm) (H x W x D)          455 x 535 x 181  

Read more less

Higher incomes: select the electricity consumption mode in real-time according to the market price; High independence: can be operated out of the power grid Higher efficiency: International leading brand components provide higher efficiency Perfect switch: it's less than 20ms from the grid Manufacturer      Solis Phases       1 Phase Power Rating       kW3 Inverter Type      Hybrid Inverter Built in DC      Yes No. of MPPT      2 Built in Communication        Optional Commodity Code       85044085 Dimensions (mm) (H x W x D).     505 x 333 x 249

Read more less

Features A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery. A USB port. A Ethernet port. A VE.Direct port. Applications The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications. Parallel and three phase operation Only one GX unit is needed in case of Parallel and three phase operation Brand Victron Energy Manufacturer Part Number PMP482506000 Voltage 48 Transfer Switch (A) 50 Cont. Output Power at 25°C 5000VA Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H506 x W275 x D147mm Weight (kg) 26 Warranty 5 Years Country of Manufacture India

Read more less

Part No: SOLAX-WIFI Display - Web Interfaces The SolaX Pocket WiFi V2.0 dongle connects to a local network to enable access to the SolaX Cloud monitoring platform. This must be within 50m of the installation to enable connection, for a greater range please see the SolaX Pocket WiFi plus. Compatibility X1-Mini G3.0 and previous X1-Boost G3.2 and previous X1-Hybrid G4.0 and previous X3-Mic / Pro G1 X3-Hybrid G4.1 and previous Features Quick installation with 'Plug & Play' function IP65 protection rating Stable data transmission and good reliability Low profile and nice exterior

Read more less

Solax X3 MEGA G2 60kW 3ph solar inverter, which delivers up to 98.4% efficiency and a maximum input voltage of 1100V as well as outstanding energy performance with its wide MPPT voltage range, enhancing power yield. The Solax X3 Mega G2 is IP66 rated, and equipped with safety and security features such as Arc-fault circuit                                                 interrupter and SPD protection.  AC attributes Max rated power: 60kW Max rated current: 87A Number of phases: 3 DC attributes Max power 90kW Max Isc currentMPPT range 46A180-1000V Max voltage 1100V Start up voltage 200V System Max efficiency 98.4% IP rating IP66 Weight 44.5kg Dimensions 630 x 521 x 286mm Key features IP66 ProtectionAFCI ProtectionOver current and temperature protectionOver/under voltage protectionBuilt-in export power control

Read more less

Part No: SUN2000-5KTL-M1 Storage Systems - Hybrid Inverter The Smart Energy Center of Huawei is the perfect solution where three phase power is needed with the added benefit of having a HV battery connected as well.  Product Features Wide range on PV input  2 x MPPT inputs Single inverter with Three Phase output High voltage battery input Type II AC and DC surge protection  Arc Fault detection Anti-islanding protection Integrated PID recovery Compatible with Huawei Smart ESS battery 5KWh to 30KWh IP65   2019 Inter Solar Award Winner   Supplier Part No: 01074320-001 Weight: 17 kg Rated Power: 5,000 W Min PPT Voltage: 200 V Max PPT Voltage: 980 V DC Startup Voltage: 200 V DC Shutdown Voltage: 140 V Max Input Voltage: 1,100 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,500 W Surge AC Power (1 Second): 5,501 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: Amphenol H4   Included Connectors: 2 Euro Efficiency: 97.5 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

When paired with a GivEnergy battery storage system, you’ll also be able to save any excess generation and power your home on solar all day long. Plus, with a max input current of 17A per string, and a max output power of 3.6kW – this string inverter is tough enough to supply the average home with ease. Inbuilt WiFi and LAN: Includes in-built WiFi and LAN for a hard-wired network connection. 12 Year Warranty: Supplied with a full manufacturers warranty. GivEnergy's UK team are on hand to help you should any issues arise. Installers must now offer an SPD to the homeowner for them to decide whether they would like one installed. Giv inverters do not come with an SPD inbuilt which means that installers will need to offer their own. Please note, customers new to Givenergy need to call the Givenergy team for training before installation. Also, customers and their installers must have logins created on the GivEnergy portal in order for systems to be registered and commissioned for full operation. AC attributes Max power: 3.6kW Max current: 16A Number of phases: 1 DC attributes Max Isc 2 * 23A Max I (per string)Max voltage 17A600V Start up voltageNo. of MPPTsMPPT Range 80V290-550V System Max efficiency 97.6% Charge / discharge efficiency 96% / 96% IP rating IP65 Weight 32kg Dimensions 583 * 205 * 480mm Key features In-built WiFi and LAN for internet connectivity.12 year warranty* when commissioned online by a certified GivEnergy installer.

Read more less

Product features Mains connection: 3-phase AC output: 8 kVA 8 kW emergency power output via separate output MPP tracker: 4 with 1 string output each Max. short circuit current per MPPT: 24 A Max. input current: 16 A Communcations: CAN, RS485, Wi-Fi 3-phase smart meter with 3 current transformers included Incl. WiFi+LAN kit Protection category: IP66 Warranty: 5 years Manufacturer.     Solis Phases.     3 Phase Power.     Rating kW8 Inverter Type.      Hybrid Inverter No. of MPPT.     4 Commodity Code.       85044086 Dimensions.       (mm) (H x W x D)496 x 596 x 230  

Read more less

Single Phase Low Voltage AC-Coupled Inverter Leading Features Supports Peak Shaving Mode 6 customisable charge/discharge time settings Compatible with multiple brands of lithium battery models Industry leading 125A/6kW max charge/discharge rating Increased battery protection and operation features to extend battery life Provide intelligent time of use solution together with the monitoring group

Read more less

Compatible with generators to extend backup duration during grid power outages. Enables multiple inverters to work together, forming a microgrid. Offers dual backup ports for smart management of critical and non-critical loads. Supports up to six battery charging and discharging Time-of-Use (TOU) schedules to reduce electricity costs. Provides 200% overload capacity for up to 10 seconds. Features flexible settings for lithium batteries, including support for non-communicating battery types.

Read more less

Compatible Products Hanchu High Voltage Battery 5.12kWh Hanchu High Voltage Battery 5.12kWh - BMS Hanchu High Voltage Battery 2.7kWh Hanchu High Voltage Battery 2.7kWh - BMS Ultra Performance 150% PV Array Over-Sizing Supports up to 150% over-sizing of the photovoltaic (PV) array, enabling greater energy generation and flexibility in system design. 100% Unbalanced Three Phase Output Ensures reliable and stable operation with full output capacity, even when loads are uneven across three phases, maximising system efficiency. Bifacial and High-Power PV Module Support Accommodates input currents up to 20A, making it ideal for modern bifacial and high-power PV modules that require higher current ratings. Reliable Operation Robust IP66 Enclosure Provides high level of protection against dust and water, making it suitable for outdoor installations. Ultra-Fast Switching Time With EPS switching time of less than 10 milliseconds, it ensures minimal interruption during power outages, crucial for sensitive electronics and critical operations. Shadow Scan Feature Enhances solar panel performance by optimising output even in non-ideal conditions, such as partial shading. Easy Maintenance Remote Management Easily manage settings and monitor performance via the iESS and Hanchu app, offering convenience and real-time control. Easy Fix DC Connections Equipped with Phoenix Contact connectors for quick and secure connections, streamlining the installation process with a hassle-free, push and click connections. Wide Compatibility Supports high-voltage batteries and offers straightforward interfaces for integrating batteries, smart meters, and current transformers (CTs), ensuring seamless compatibility with a variety of existing systems. PV Input Max. PV array power : 18000Wp Max. input voltage : 1100V MPPT voltage range / rated input voltage : 200V to 950V/630V Min. input voltage / start voltage : 60V/180V No. of independent MPPT trackers / strings per MPPT input : 2 / 1 Max. input current per MPP tracker : 20A Max. short-circuit current per MPP tracker : 30A Battery Input Nominal battery voltage : / Battery voltage range : 120V to 600V Max. charging / discharge power : 12000W Max. charging current / Max. discharging current : 36A Battery type : LFP AC Output AC voltage range / Nomlnal AC voltage : 270V to 480V /3/N/PE | 220/380V; 230/400V;240/415V Rated AC grid frequency : 50Hz/ 60Hz Rated apparent power : 12000VA Max. apparent power : 12000VA Rated grid output current (@230V) : 17.4A Max. grid output current : 19.2A AC Input Rated grid voltage : 3/N/PE | 220/380V;230/400V;240/415V Rated apparent power : 24000W Max. input apparent power from grid : / Rated input curent from grid : / Max. input current from grid : 34.8A EPS Output Nominal output voltage : 3/N/PE | 220/380V;230/400V;240/415V Nominal output frequency : 50Hz/ 60Hz Rated apparent power : 12000VA Max. output apparent power : / Peak output apparent power : 2 times of rated power | 10s Max. output current : 17.4A Max. switch time : ＜10ms Efficiency MPPT efficiency : 99.90% Euro efficiency / Max. efficiency : 97.9%/98.4% Max. battery to load efficiency : / General Data Dimensions (W*H*D) (mm) : 545*465*205 Device weight : 24.5Kg Operating temperature range : -25℃~+60℃ Noise emissions (typical) : / Standby consumption : / Degree of protection (as per lEC 60529) : IP66 Features User interface : LED & APP Communication with BMS : CAN Communication with meter : RS485 Communication with portal : WiFi/LAN/5G/Bluetooth Other communication : / Communication : / Integrated power control / Zero export control : Integrated/Integrated Certifications : EN 61000/IEC 62109/EN 50549/VDE 4105/VFR 201/ G98/G99/G100/CEI 0-21/NEN Warranty : 12 years

Read more less

The EcoFlow PowerOcean redefines home energy storage with an advanced safety system, LFP battery tech, a fire prevention module, and an IP65-certified design. The EcoFlow PowerOcean comes with a 15-year warranty, with batteries expandable up to 45kWh while offering over 6,000 charge cycles. The EcoFlow PowerOcean is a secure, scalable, and future-proof power investment for your home. Main features: 15 year industry leading warranty Instant cell-level Anti-Fire protection Built in heating pads to ensure optimum performance even in sub-zero temperatures. UK technical support IP65 certification, ensuring it stands strong against dust ingress and resistant to low-pressure water jets from any direction. 95% D.O.D Expandable up to 45kWh per inverter Expandable up to 2 inverters in parallel  Individual BMS allowing optimal performance and ensures compatibility with newer model batteries Industry-leading APP API to charge from Octopus tariffs such as Agile & Flux Sleek, slim design    At the heart of EcoFlow PowerOcean lies our advanced LFP battery pack, meticulously engineered for peak performance and unparalleled safety. This battery pack blends high-efficiency output with innovative safety features, delivering relentless power and peace of mind to all PowerOcean users.  

Read more less

Click Here To Register For The On-line Installation Training Course INCLUDED IN PACKAGE: 7.6KW HYBRID INVERTER 3.3 KWH BATTERIES X 3 TOP COVER FLOOR BASE WIFI DONGLE SMART METER INTERNAL DC BREAKER HYBRID INVERTER 7.6KW Max DC input 10kwp 7600W nominal AC output power IP67 rating Dimensions (W x H x D)mm 600  x 1221 x 243 10  year warranty BATTERIES 9.9kW OF POWER FROM THE 3 x BATTERIES COMBINED DOC 100% VOLTAGE RANGE 30v - 43.8v WEIGHT OF EACH BATTERY: 35kg IP RATING: IP67 INTEGRATED PROTECTION Battery Input Reverse / Polarity Protection Over load Protection (DC-AC side) AC Short Circuit Current Protection / Output Short Protection Output Over Current Protection DC (PV+Battery) Short Circuit Current Protection AC Surge Protection (SPD -Type) Output Over Voltage Protection Grid and Back-up (SPD Type II) Anti Islanding Protection PV String Input Reverse Polarity Protection Ground Fault Monitoring Temperature Protection (Inverter + Battery) Integrated DC Switch (PV - Disconnector) Emergency Stop WARRANTY Inverter: 10 YearsBattery:   >80% Capacity 10 Years / 6000 cyclesAccessories: 2 Years

Read more less

The Polar ESS hybrid inverter. Affordable, yes. Reliable, yes.An absolute champ of a product? Also yes.   5 Year warranty as standard, for all systems commissioned in May, June, and July 2024   System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE THE FEATURES A solar inverter and a battery inverter in one tidy little unit Two power capacity options, to meet your power needs Seriously high cost-performance ratio (aka, bang for that buck) Can be installed nice and neat in a standard server rack Loads of inbuilt safety features Supports voltage balancing function during charging (or passive balancing for the techies) Supports multiple parallel operations, so you can scale as you like Displays key info like charging/discharging voltage and current via a handy digital screen Harness up to 9kW of useful generation  DC/DC charging from solar for maximum efficiency THE DIGITS HYBRID INVERTER 3.6KW 5400W max. DC power 3600W nominal AC output power IP20 rating Dimensions 20W x 195D x 475H (mm) 3 year warranty, extendable to 5

Read more less

This part is a special offer made up of the following items: Part   1 x FE-HV-ECM-4100 Fox ECS 4.03kWh HV Battery (Master)   1 x FE-HV-ECS-4100 Fox ECS 4.03kWh HV Battery (Slave)   1 x FE-H1-3.7-G2 Fox H1 3.7kW Hybrid Inverter 1PH G2 Weight: 95.05 kg

Read more less

Part No: FE-F5000 Inverters - Main Units Rating: 5,000W Phases: 1 FOX ESS - PV Inverter - F Series - 5kW F5000 Our Dual-MPPT F Series range includes 3.0 - 6.0kW models. The F Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: F5000 Weight: 15.5 kg Rated Power: 5,000 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 0 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96.8 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

Harness the power of the sun day and night with FoxESS' groundbreaking line of hybrid inverters. Easy installation - Plug & Play, built-in fuse protection. Maximum yields - Low starting voltage, 97.3% maximum efficiency Maximum flexibility - 3 battery types to choose from, True 3-phase backup power Monitoring - Monitor remotely via app or web portal. FoxESS inverters are not compatible with SolarEdge or Huawei optimizers, but with those from Tigo. 3PH Smart Meter included in packaging. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard.  Weight: 28 kg Rated Power: 12,000 W Min PPT Voltage: 160 V Max PPT Voltage: 950 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 12,000 W Surge AC Power (1 Second): 13,200 W Max DC Current: 26 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4   Included Connectors: 4 Euro Efficiency: 98 % Transformer: N/A MPPT Quantity : 2 Has Integrated DC Switch: Yes

Read more less

Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN482120400 Voltage 48 VA 1200 Peak Power (W) 2200 Max Efficiency 92% Plug Type UK IP Rating IP21 Dimensions (Including Terminals) H117 x W232 x D327mm Weight (kg) 7.4 Warranty 5 Years

Read more less

Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122300000 Voltage 12 VA 3000 Peak Power (VA) 6000 Max Efficiency 93% IP Rating IP22 Dimensions (Including Terminals) H533 x W285 x D150mm Weight (kg) 19 Warranty 5 Years

Read more less

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.   Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.   PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.   Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.   Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.   Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.   On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.   Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number PMP482805000 GTIN 8719076050568 Voltage 48V Cont. Output Power at 25°C 8000VA Peak Power 15000W Output AC Voltage 230V Transfer Switch 100A Max. AC Input Current 100A Max. Battery Charge Current 110A Protection Category IP22 Efficiency 95% Bluetooth Compatible Yes Dimensions H642 x W363 x D206mm Weight 42Kg Warranty 5 Years

Read more less

This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges whilst incorporating some new and welcome enhancements. Some additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load 30 Min installation Faster and easier installation reduces the time spent on site Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C   Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products meaning there is no need to purchase additional Wi-Fi equipment Supplier Part No: X1 G4- Hybrid 5.0 D with Wi-Fi Weight: 24 kg Rated Power: 5,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: SUNCLIX   Included Connectors: 2 Euro Efficiency: 97 % Transformer: None MPPT Quantity : 2 Has Integrated DC Switch: No Warranty: 5 years  

Read more less

S6-GR1P(0.7-3.6)K-M series inverter is designed for residential PV plants. The maximum input current per string is 14A which is compatible with high-efficiency modules and bi-facial modules. Compact and lightweight design make it easy to install. Fanless design lower noise brings you a comfortable living environment. Integrated AFCI function can proactively reduce the risk of fire. Manufacturer.        Solis Phases.          1 Phase Power Rating.        kW3 Inverter Type.       String Inverter Built in DC.      Yes No. of MPPT.      1 Built in Communication.       Optional Commodity Code.         85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

Solis Mini Series Inverter Leading Features:• Max. efficiency 97.3%• Compact and lightweight• String current up to 14A• Super high frequency switching technology• Wide voltage range and low startup voltage• Precise MPPT algorithm• Intergrated Export Power Manager (EPM)• Integrated AFCI (DC arc-fault circuit protection)• Friendly and adaptable connection to the grid Manufacturer          Solis Phases            1 Phase Power Rating               kW1.5 Inverter Type              String Inverter Built in DC               Yes No. of MPPT            1 Built in Communication            Optional Commodity Code              85044085 Dimensions (mm) (H x W x D)373 x 310 x 160

Read more less

IP66 > 150% DC/AC ratio String current up to 16A Supports RS485, WiFi, GPRS Supports export power control Intelligent redundant fan-cooling Natural convection, Fan-less design Wide voltage range and low startup voltage Supports aluminium wire access to reduce cost AFCI protection, proactively reduces fire risk Intelligent string monitoring, smart I-V curve scan Natural convection, Fan-less design, longer lifespan Globally recognised branded componentry for longer life Supports high power modules for lower installation costs 3/4 MPPT design, supports multiple orientation system design Night time PID recovery function, increases overall system yield (optional) Scan to register on SolisCloud, supports remote upgrade and control Supports GPRS/WiFi communication with less wiring and reduced installation costs Application       Commercial Manufacturer        Solis Phases        3 Phase Power Rating         kW30 Inverter Type       String Inverter Built in DC       Yes No. of MPPT       3  Built in Communication       Optional Commodity Code        85044086 Dimensions (mm) (H x W x D)      629 x 647 x 252

Read more less

The EcoFlow PowerOcean Battery sets a new standard in home energy storage, featuring cutting-edge safety elements like LFP battery technology and a built-in fire prevention module. Engineered with an IP65-rated enclosure, it offers strong protection against dust and water, delivering a durable and dependable power solution for your home.To be installed with Power Ocean Plus 3ph hybrid inverters.The Base and Junction Box can stack a maximum of 15kWh capacity, which is 3 batteries.

Read more less

EcoFlow PowerOcean Plus Three-Phase  Home Solar Battery Solution The EcoFlow PowerOcean Plus redefines solar power utilisation to an extreme, especially for houses with big and complex roof structures. With up to 40kW solar input, 29.9kW AC output and dynamic tariff support, the system achieves maximum power independence and financial savings on energy bills. Full compatibility with all EcoFlow home energy Ecosystem products, smart monitoring and control over your household appliances can be achieved right now. The 29.9kW Three Phase Plus must be used with the Junction box Plus.  Support up to 4 PV strings, ideal for complex rooftop designs Support up to 40kW PV input, equivalent to 200 sqm of the total rooftop size. Up to 29.9kW AC output, power everything all at once, now with solar No appliance is too big for solar, maximising your entire home’s power independence EcoFlow home energy ecosystem supported From EV charging to heat pump, personalise your energy independence effortlessly Dynamic tariff supported Plan your energy purchases at low pricing, ensuring the maximised bill savings Seamless Whole-Home Backup Ensure uninterrupted energy supply with rapid switching androbust 29.9kW capacity. Unified Home Power, Simplified Control Smartly track power usage, solar input, and battery storage inreal time with just one app for your solar storage system, EVcharger, and heat pump. Prioritize solar energy, automaticallycharging your battery with excess energy for nighttime use. Integrated With Dynamic Tariff The dynamic tariff empowers you by granting access to yourchosen dynamic pricing platform, whether it's Nord Pool orTibber, as a reliable point of reference. Featuring real-time24-hour tariff pricing, this dashboard enables users to strategi-cally plan their energy purchases, ensuring they capitalise on themost economical rates available.

Read more less