Photovoltaic

The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) Compatible with 4mm2 - 6mm2 cable thickness MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68)

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.

Read more less

Part No: MC4-5M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-50021 Weight: 0.29 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Part No: SOL-S1-W4G-ST-S5-4P Display - Web Interfaces SOL-S1-W4G-ST (Without SIM) (4-pin)           Solis S1 WIFI + 4G Cellular Stick, SolisCloudready, With no SIM, 4 pin for all S5 inverters and below Solis Data Loggers Features:  Support WiFi and 4G communication Status indicator, easy to display working status RESET button, one key to send data, convenient debugging Fault alarm, real-time monitoring Support Bluetooth nearby connection and debugging

Read more less

String-level rapid shutdown device with 1~2 strings Ensure the safety and reliability of your photovoltaic installations with the PEFS Rapid Shutdown. Specially designed as a critical safety device, this cutting-edge solution offers peace of mind in emergency situations. In the event of an emergency, such as a fire outbreak, the DC disconnect switch becomes your first line of defense. This switch is strategically engineered to swiftly disconnect connected strings of the installation, mitigating potential hazards and containing risks. Key Features: Enhanced safety for DC photovoltaic installations Swift disconnection of connected strings during emergencies Robust enclosure built to withstand dust and moisture (IP66) Automatic switch-off during AC power interruptions exceeding five seconds Automatic switch-on upon AC power restoration longer than five seconds

Read more less

Manufacturer.          Solis Commodity Code.            85437090

Read more less

Part No: MC4-2M-1 Cables - Pre Terminated Cables Snap-in lock     Supplier Part No: 32.0026-20021 Weight: 0.13 kg Length: 2 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44  

Read more less

  IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 32A Number of DC poles: 4 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI32-PEL64R-4

Read more less

Part No: CT300-48B-100 AC Components - AC Accessories Plastic cable tie Black CT300/48B 300mm x 4.8mm Pack of 100.   Supplier Part No:CT300-4.8B Items in this pack:100 Weight:0.206 kg

Read more less

The MC4-Evo2A is the latest addition to the Stäubli Electrical Connector PV portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68) MC4 Evo 2 Female cable coupler as individual part (including insulating part)   PLEASE NOTE THIS IS A NEW MC4-EVO2 CONNECTOR AND IT WILL REQUIRE SPECIAL MC4-EVO2 CRIMPING TOOL. THE STANDARD MC4 TOOLS SHOULD NOT BE USED WITH THIS TYPE OF CONNECTOR.       DI comes with Maroon seal. Supplier Code: 32.0316P0001 Rated current: 45A 4mm2 and 53A 6mm2 cables Important The MC4-EVO2A-0316-FEM connectors are compatible with the MC4-EVO2-MAL1 connectors. Supplier Part No: 32.0316P0001 Weight: 0.013 kg

Read more less

Part No: SOL-S1-W4G-ST-S5-4P-S Display - Web Interfaces SOL-S1-W4G-ST (With SIM) (4-pin)         Solis S1 WIFI + 4G Cellular Stick, SolisCloud ready, With 5 yearSIM, 4 pin for all S5 inverters and below. Solis Data Loggers Features:  Support WiFi and 4G communication Status indicator, easy to display working status RESET button, one key to send data, convenient debugging Fault alarm, real-time monitoring Support Bluetooth nearby connection and debugging

Read more less

IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 55A Number of DC poles: 2 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI55-PEL64R-2

Read more less

IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 800V Rated current: 16A Number of DC poles: 2 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 80mm Product SI16-PEL64R-2

Read more less

Part No: TIGO-TAP Display - Plant Communications Tigo TAP utilises ‘mesh’ technology which allows each Tigo TS4 optimiser to act as a repeater, extending the range of TAP.  The signal and data can hop from TS4 to TS4 along many different paths. As long as the TS4 optimisers are not more than 10m from each other, the TAP total range including ‘hops’ is 35m.     For details on differences between Gateway and TAP please follow the link to Tigo website.  Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication   Supplier Part No: 158-00000-02 Weight: 0.23 kg

Read more less

Part No: MC4-5M-2 Cables - Pre Terminated Cables Keywords: MC4 10M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock.   A mix of 4 and 6mm will be provided   Supplier Part No: 100038568 Items in this pack: 2 Weight: 0.58 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

Single phase ECA2 meter Z version without pulsed output (this is not the flashing LED but actually a physical connection with a transistor output. This is normally used with Data loggers but is rarely used in PV metering).

Read more less

Part No: MC4-SPAN-MET Tools - Accessories Assembly and unlocking tool, incl. belt pouch (consisting of 2 open-end spanners), metalMC4SPAN, Stäubli, Tools, Accessory   Supplier Part No: 32.6058 Weight: 0.3 kg

Read more less

Part No: JK03M Cables - Connectors PV Cable Connector: PV-JK03M/xy series   High security, only unbolt by tools. Low contact resistance. Retaining structure of nut to keep torsion valid. Resistance to ozone and ultraviolet radiation. Degree of Protection : IP68. Certification of TÜV, UL, and JET. Compatible with the first-generation product of JinKO.   Supplier Part No: JK03M Items in this pack: 2 Weight: 0.14 kg

Read more less

Female and Male cable coupler MC4-EVO ready. Tool-free cable connection: no crimping necessary, the contact is made by an automatically closing spring clamp. For cables cross section of 4 mm² and 6 mm². No single parts. the connectors are complete and pre-screwed: insert the stripped PV lead, screw on the housing done. To be used with suitable mated connectors from the MC4 product family and suitable.

Read more less

Female and Male cable coupler MC4-EVO ready. Tool-free cable connection: no crimping necessary, the contact is made by an automatically closing spring clamp. For cables cross section of 4 mm² and 6 mm². No single parts. the connectors are complete and pre-screwed: insert the stripped PV lead, screw on the housing done. To be used with suitable mated connectors from the MC4 product family and suitable.

Read more less

The MC4-Evo2A is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68)

Read more less

The MC4-Evo2A is the latest addition to the Stäubli Electrical Connectors PV connector portfolio. Internationally certified with IEC, UL, JET, cTÜVus Approved for 1500 V DC (IEC) MULTILAM Technology, has proven the quality and durability several 100 million times since 2004 Suited for all climatic environments thanks to resistance to UV, ammonia, salt-mist spray and high IP class (IP68)

Read more less

Part No: EN-S-WB-230-UK Inverters - Micro Inverter Gateway The Enphase Envoy-S Standard communications gateway delivers solar production data to Enphase Enlighten monitoring and analysis software for comprehensive, remote maintenance and management of the Enphase System. With multiple powering and connection options, Envoy-S Standard allows for greatest installation flexibility.    All Enphase systems must be connected to the internet and registered within 45 consecutive days following the warranty start date in order to be covered. Please note due to shortage of Envoy S Standard units, you might receive a Metered version with CTs and without UK plug. The functionality of product is exactly the same, but the unit will need to be hardwired.   Supplier Part No: ENV-S-WB-230 Weight: 1.07 kg

Read more less

Part No: MYEN-EDDI-RLYBD Accessories - Immersion Controllers eddi has the option to install a Relay & Sensor board which allows for many different wiring configurations and includes the following features:   Two independent multi-function relays (16Amp) eSense input (isolated 230V detection for low tariff etc.) Two temperature sensor inputs (PT1000)   The two relays can be independently set for several different functions, or they can be set to operate as a pair. The relay functions include:   – Export Threshold – Import Threshold – Operate when heating – De-stratification pump control – Timed operation – Fault signal for BMS systems   Please refer to the eddi manual for fitting diagrams.   Supplier Part No:MYEN-EDDI-RLYBD Weight:0.5 kg

Read more less

4G Export CT Clamp from Solis with a 10m Cable Manufacturer        Solis Accessory Product Type         CT Clamps Commodity Code         85045000 Dimensions (mm) (H x W x D)100 x 75 x 75

Read more less

Supplier Code:32.0014P0001: Female cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables.    Supplier Part No: 32.0014P0010-UR Weight: 0.01 kg

Read more less

Part No: MC4-CAP-MALE Cables - Accessories Snap-in lock   Supplier Part No: 32.0716 Weight: 0.019 kg

Read more less

Part No: MC4-CAP-FEMALE Cables - Accessories Snap-in lock Supplier Part No: 32.0717 Weight: 0.005 kg

Read more less

Field-Wireable Connectors   Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits Available in male and female connector types   Supplier Part No:Q-CONN-R-10M Weight:0.05 kg

Read more less

MC4-Evo 2 Y-Splitter is TÜV Rheinland certified and guarantees a long-lasting, stable connection within a PV DC string: Minimal energy loss, low heat generation. Robust housing, safety class IP68 (1 m, 1 h). Cable cross-section 6 mm² MC-4 splitter kit, consisting of: MC4-Y-CONN-FEM and MC4-Y-CONN-MAL For time-saving, safe contact duplication without additional connectors. Branch connectors.  Keywords: MC4SYPL2, Stäubli, PV Cable   Weight: 0.5 kg

Read more less

SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

Read more less

Part No: PEAS69-EL32R-4 Switches - AC Isolators PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification   Supplier Part No: PEAS69-EL32R-4 Weight: 0.4 kg Rated Power: 7,360 W Poles: 4 Max Cable: 10 mm2 Max Voltage: 240 V Rated Current: 32 A Rated Voltage: 230 V

Read more less

IMO offers a range of DC isolators designed for use in Solar PV Installations. The IMO design features an advanced switching action where the handle triggers a spring to snap the contacts rapidly. The disconnection of the load circuits and the suppression of the arc produced by a constant DC load is normally extinguished within 3ms. The handle can be padlocked into the off position, meaning that if work needs to be done to the inverter, the DC supply can be safely and securely isolated. Rated insulation voltage: 600V Rated current: 55A Number of DC poles: 4 5 year warranty NEMA 4X and IP66 rated Box Dimensions: 180mm x 98mm x 107mm Product SI55-PEL64R-4

Read more less

Part No: EN-Q-TERM-R Accessories - Cable termination caps Enphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit.  Single item only.   Supplier Part No:EN-Q-TERM-R Weight:0.025 kg

Read more less

Supplier code:32.0014P0001 Female cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables. 

Read more less

Part No: EN-Q-DISC Tools - Accessories Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount. Single item only.    Supplier Part No:Q-DISC-10 Weight:0.01 kg

Read more less

Part No: MC4-10M-1 Cables - Pre Terminated Cables Keywords: MC410M2, Stäubli, PV Cable, Pre Terminated Cable   Supplier Part No: 32.00226-10M21 Weight: 0.58 kg Length: 10 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.

Read more less

Part No: SOL-S1-W4G-ST-S6-USB-S Display - Web Interfaces SOL-S1-W4G-ST (With SIM) (USB) Solis S1 WIFI + 4G Cellular Stick, SolisCloud ready, With 5 year SIM, USB for all S6 inverters and above Solis Data Loggers Features:  Support WiFi and 4G communication Status indicator, easy to display working status RESET button, one key to send data, convenient debugging Fault alarm, real-time monitoring Support Bluetooth nearby connection and debugging

Read more less

PV-Ultra is a durable cable specifically crafted for DC interconnections within solar photovoltaic systems. With outstanding mechanical properties, it can be installed both internally and externally. Constructed from high-quality materials, it boasts an expected lifespan of approximately 25 years. The cables are designed to operate at a maximum conductor temperature of 90°C, with a permissible maximum conductor temperature of 120°C for up to 20,000 hours, under a maximum ambient temperature of 90°C. Features and Benefits Easier to handle and identify Saves installation costs and installation time Easier to route along/through buildings or walls Gives a cleaner, neater installation Safer as it removes the need for junction boxes Safer as it looks like a power cable to reduces the risk of accidental damage Pre-marked ‘LIVE DC’ warning message to improve safety

Read more less

PV-Ultra is a durable cable specifically crafted for DC interconnections within solar photovoltaic systems. With outstanding mechanical properties, it can be installed both internally and externally. Constructed from high-quality materials, it boasts an expected lifespan of approximately 25 years. The cables are designed to operate at a maximum conductor temperature of 90°C, with a permissible maximum conductor temperature of 120°C for up to 20,000 hours, under a maximum ambient temperature of 90°C. Features and Benefits Easier to handle and identify Saves installation costs and installation time Easier to route along/through buildings or walls Gives a cleaner, neater installation Safer as it removes the need for junction boxes Safer as it looks like a power cable to reduces the risk of accidental damage Pre-marked ‘LIVE DC’ warning message to improve safety

Read more less

PV-Ultra is a durable cable specifically crafted for DC interconnections within solar photovoltaic systems. With outstanding mechanical properties, it can be installed both internally and externally. Constructed from high-quality materials, it boasts an expected lifespan of approximately 25 years. The cables are designed to operate at a maximum conductor temperature of 90°C, with a permissible maximum conductor temperature of 120°C for up to 20,000 hours, under a maximum ambient temperature of 90°C. Features and Benefits Easier to handle and identify Saves installation costs and installation time Easier to route along/through buildings or walls Gives a cleaner, neater installation Safer as it removes the need for junction boxes Safer as it looks like a power cable to reduces the risk of accidental damage Pre-marked ‘LIVE DC’ warning message to improve safety

Read more less

Maximise Self-Consumption eddi+ ensures you use as much of your self-generated solar power as possible by diverting surplus energy to heat your water, or power other resistive heating loads up to 9kW, reducing reliance on the grid. Simple Installation Quick and easy setup. eddi+ can be installed with minimal wiring, and utilises our new installation assistant for commissioning, making it a hassle-free addition to your solar panel system. Energy Monitoring The myenergi app provides real-time data on energy diverted, savings, and overall system performance, helping you make informed decisions about your energy use. Future-Proof Technology eddi+ is designed to work with future upgrades, such as additional solar panels, heat pumps, battery storage, or electric vehicle chargers. Eco-Friendly Living By optimising the use of your solar energy and smart tariffs, you contribute to a greener planet and reduce your home’s carbon emissions. Cost Savings Lower energy bills by using eddi+ to utilise more of your own solar energy or a smart tariff. Silent Operation eddi+ operates silently by utilising passive cooling, ensuring that your home’s peace and quiet are maintained while it works efficiently in the background. Control from Anywhere The myenergi app allows you to monitor and control your eddi+ from anywhere in the world, with live updates on your energy usage. Built-in Connectivity Ethernet and WiFi interfaces are built-in for easy and reliable internet connectivity without needing additional accessories. This device must be supplied by an upstream 3-pole 16A type A or B MCB or equivalent overcurrent device.

Read more less

Supplier Code:32.0015P0001: Male cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables.    Supplier Part No: 32.0015P0010-UR Weight: 0.01 kg

Read more less

The new, improved Firefighter's Safety Switch system from Santon is designed for automatic (remote/motorised) disconnection of the DC output from an installed array of PV modules. 40A 1000V 4P with 8 x MC4 connectors and 1 x M12 The Firefighter Safety Switch system can operate/disconnect a PV installation quickly, completely and remotely with one simple action at the control-panel interface, or even by remote actuation using the mobile phone network. By shutting off the installation, no DC power is conducted from the array through the property which results in a safe situation for firefighters to fight the fire and enter the building. This unit is 40A 1000V 4P and it is pre-wired with 8 x MC4 connectors and 1 x M12 cable gland for AC.    Supplier Part No: DFSHP-14-MC4 Weight: 2.5 kg

Read more less

String-Level Rapid Shutdown Device With 3~5 Strings Ensure the safety and reliability of your photovoltaic installations with the PEFS Rapid Shutdown. Specially designed as a critical safety device, this cutting-edge solution offers peace of mind in emergency situations. In the event of an emergency, such as a fire outbreak, the DC disconnect switch becomes your first line of defense. This switch is strategically engineered to swiftly disconnect connected strings of the installation, mitigating potential hazards and containing risks. Key Features: Enhanced safety for DC photovoltaic installations Swift disconnection of connected strings during emergencies Robust enclosure built to withstand dust and moisture (IP66) Automatic switch-off during AC power interruptions exceeding five seconds Automatic switch-on upon AC power restoration longer than five seconds   5 Years Warranty   Supplier Part No: PEFS-EL40H-10-P2 Weight: 4 kg Poles: 10 Max Cable: 10 mm2 Max Voltage: 1,500 V Rated Current: 40 A Rated Voltage:  1000 V Rated Current: 30 A Rated Voltage: 1200 V Rated Current: 20 A Rated Voltage: 1500 V

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.  

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less