Quick Order
Victron Victron Energy 12 Volt plug (cigarette plug with 16A fuse) – BPC900300014
The 12V cigarette lighter plug, with fuse, is an accessory for the Blue Power IP65 Charger with DC connector. With this plug you can charge your vehicle battery via the cigarette lighter socket. Brand Victron Energy Manufacturer Part Number BPC900300014 Warranty 5 Years
£9.10 Exc. VAT
£10.92 Inc. VAT
Victron Victron Energy Clamp connector (with 30A ATO fuse) – BPC900400014
Brand Victron Energy Manufacturer Part Number BPC900400014 Warranty 5 Years
£8.40 Exc. VAT
£10.08 Inc. VAT
Victron Victron Energy Wall Mount for Blue Smart IP65 Charger 12/10, 12/15, 24/8 – BPC920100200
Brand Victron Energy Manufacturer Part Number BPC920100200 Dimensions H134 x W145 x D72mm Warranty 5 Years
£3.60 Exc. VAT
£4.32 Inc. VAT
Victron Victron Energy Case for Blue Smart IP65 Chargers and Accessories – BPC940100100
Smart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories. Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options. (Charger and accessories not included) CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number BPC940100100 Dimensions H295 x W350 x D105 mm Warranty 5 Years
£18.90 Exc. VAT
£22.68 Inc. VAT
Victron Victron Energy Blue Smart IP22 Charger 12/30(3) 230V UK – BPC123048022
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure. Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number BPC123048022 GTIN 8719076052425 Voltage 12 Charger Amps 30A Outputs 3 Efficiency 93% Plug Type UK IP Rating IP22 Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years
£143.50 Exc. VAT
£172.20 Inc. VAT
Victron Victron Energy VE.Direct Bluetooth Smart Dongle – ASS030536011
The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. With the VE.Direct to Bluetooth Smart dongle you can get live status info, see historical values as well as configure Victron products.The dongle works together with the VictronConnect app, available for both Android and iOS devices. Brand Victron Energy Manufacturer Part Number ASS030536011 Weight (kg) 0.27 Warranty 5 Years
£28.00 Exc. VAT
£33.60 Inc. VAT
Victron Victron Energy Phoenix Charger 24/25 (2+1) – PCH024025001
Features Adaptive 4-stage charge characteristic: bulk – absorption – float – storage The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used. The right amount of charge: variable absorption time When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensation Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected. Battery voltage sense In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) The chargers will accept a 90-400 V DC supply. Computer interface Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with our VEConfigure software, which can be downloaded free of charge from the Victron Energy website and the data link MK3-USB (see accessories), all parameters of the chargers can be customised. CLICK HERE FOR SPEC SHEET Brand Victron Energy Manufacturer Part Number PCH024025001 Voltage 24 Charger Current House Battery 25A Charger Current Starter Battery 4A Recommended Battery Capacity 100 – 400Ah Battery Connection M6 Studs Outputs 2+1 IP Rating IP21 Dimensions H350 x W200 x D108mm Weight (kg) 3.8 Warranty 5 Years
£434.00 Exc. VAT
£520.80 Inc. VAT
Victron Victron Energy GX Touch 50 Wall Mount – BPP900465050
Brand Victron Energy Manufacturer Part Number BPP900465050 GTIN 8719076054078 Dimensions L128.1 x W87 x D24.4mm Warranty 5 Years
£10.50 Exc. VAT
£12.60 Inc. VAT
Victron Victron Energy CCGX WiFi module simple (Nano USB) – BPP900100200
This nano USB WiFi dongle is software compatible with the Colour Control GX unit – (many similar standard dongles are not compatible due to driver support so please check), adding Wireless LAN connectivity where running a network cable to router or access point is unsuitable. Brand Victron Energy Manufacturer Part Number BPP900100200 Warranty 5 Years
£15.25 Exc. VAT
£18.30 Inc. VAT
Victron Victron Energy Phoenix Inverter Control VE.Direct – REC040010210R
Brand Victron Energy Manufacturer Part Number REC040010210R Warranty 5 Years
£14.70 Exc. VAT
£17.64 Inc. VAT
Victron Victron Energy RJ45 UTP Cable 1.8m – ASS030064950
Brand Victron Energy Manufacturer Part Number ASS030064950 Cable Length 1.8m Warranty 5 Years
£7.70 Exc. VAT
£9.24 Inc. VAT
Victron Victron Energy VE.Direct Cable 0.3m – ASS030530203
Brand Victron Energy Manufacturer Part Number ASS030530203 Cable Length 0.3m Warranty 5 Years
£9.80 Exc. VAT
£11.76 Inc. VAT
Victron Victron Energy VE.Direct Cable 3m – ASS030530230
Brand Victron Energy Manufacturer Part Number ASS030530230 Cable Length 3m Warranty 5 Years
£10.50 Exc. VAT
£12.60 Inc. VAT
Victron Victron Energy VE.Direct Cable 3m (one side Right Angle) – ASS030531230
Brand Victron Energy Manufacturer Part Number ASS030531230 Cable Length 3m Warranty 5 Years
£10.50 Exc. VAT
£12.60 Inc. VAT
Victron Victron Energy M6 eyelet connector (with 30A ATO fuse) – BPC900100014
Brand Victron Energy Manufacturer Part Number BPC900100014 Warranty 5 Years
£5.23 Exc. VAT
£6.28 Inc. VAT
Victron Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010
Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP122305010 GTIN 8719076048916 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 93% Bluetooth Compatible Yes Dimensions H546 x W275 x D147mm Weight 19Kg Warranty 5 Years
£895.74 Exc. VAT
£1,074.89 Inc. VAT
Fulbat FTX20HL-BS GEL FULBAT MOTORCYCLE BATTERY
The Fulbat GEL batteries are easy to install and ready to go straight away. They are 100% maintenance free with no acid handling required. Key Benefits of Gel batteries: High performance starting power. High resilience to deep and repeated discharge. Maintenance free. High vibration resistance. Supplied fully charged and ready to go. Can be installed in any orientation. Made for modern motorcycles, quad bikes, utility terrain vehicles. Brand Fulbat Voltage 12 Volts Technology Gel Capacity (C20) 18.9 Ah CCA (EN) 310 A Length 175 mm Width 87 mm Height inc. terms 155 mm Guarantee 1 Year Barcode (EAN) 3564095509246
£52.11 Exc. VAT
£62.53 Inc. VAT
Powerland Sunsynk 3ph 10Kw On & Off grid Hybrid solar & wind Inverter
Product description Sunsynk 3ph 10K Hybrid Inverter solar & wind Inverter #5: SYNK-10K-SG04LP3 The Sunsynk Three-Phase Hybrid Storage Inverters are highly efficient power management tools for three-phase grid applications. These inverters allow the user to control power flow from multiple sources such as solar, main electrical grids, and generators, and effectively store and deliver electric power to your applications.These amazing three-phase inverters have a unique feature. They can operate and balance the load, which means you can have 20% connected to one phase, 20% to another, and 60% to the third phase, and it still gives perfect phase rotation. No other inverter in their class can offer this feature.Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net. Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.
£2,499.00 Exc. VAT
£2,998.80 Inc. VAT
Hankook Hankook XV27 Dual Purpose Leisure Battery
This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry. This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more. The product is supplied charged and ready to fit. Features X-Frame Full framed grid design restrains grid growth and short-circuits. Benefit: Upgraded quality and longer life span equalling reliability Thicker calcium coated plates with high density active material Strong carry handle for installation Vibration resistant design with reinforced container Unique designed grid for electric flow which ensures high electric conductivities and strong adhesion of active materials. Benefit: Providing higher starting power stable structure and few corrosion. Brand Hankook Manufacturer Part Number XV27 Voltage 12V Battery Capacity (C20) 90Ah Cold Cranking 720CCA Terminal Type Dual Terminals, Standard Automotive & Threaded Post Terminal Layout Left Hand Positive Hold Down B01 Dimensions (Including Terminals) L302 x W172 x H220mm Weight 20Kg Warranty 4 Years Country of Manufacture South Korea Battery Technology Sealed Calcium Battery Application Dual Purpose Warranty 4 Years Battery Type: XV27
£76.47 Exc. VAT
£91.76 Inc. VAT
Powerland Fastensol Nut
These nuts sit in the profile of Fastensol rail, and can be spun unto bolts for fixing components to the rail. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd
£0.22 Exc. VAT
£0.26 Inc. VAT
Powerland Fastensol 200mm Hanger Bolt for Steel
These heavy-duty 200mm hanger bolts are suitable for fixing mounting rail to metal or corrugated cement roofs with steel supports, and come supplied with EPDM seal and two nuts, as well as a substantial steel or aluminium L-bracket. The bracket locks between the upper two nuts and is height adjustable. Not MCS certified.
£5.10 Exc. VAT
£6.12 Inc. VAT
Powerland JA Solar 420W Mono Traceable LR Half-Cell All Black MC4
High stock levels available on all panels, please contact us via live chat for up-to-date stock before purchase, as stock levels are subject to change. Alternatively, you can email or call us. Part No: JAM54S-31-420-LR-TS-AB Panels - Monocrystalline Rating: 420W Efficiency: 21% Width: 1,134mm Height: 1,762mm Product Features: Higher output power (420W). Lower levelized cost of energy (LCOE). Better shading tolerance. Enhanced tolerance for mechanical loading. 15-year product warranty and 25-year linear power output warranty. Comes supplied with staubli MC4 connectors. JA Solar Integrated Traceable System Supplier Part No: JAM54S-31-420-LR-TS-AB Weight: 20 kg Rated Power: 420 W MCS Reference: BABT 8515-240-405W Length: 1,762 mm Width: 1,134 mm Depth: 30 mm VMPP: 31.11 V IMPP: 13.5 A Isc: 14.25 A Voc: 37.73 V Temp. Coefficient (Mpp): -0.35 % Clamp position on panel: Long and short side Connector Type: EVO2 Efficiency: 21.0 % Pallet Size: Oversized
£58.95 Exc. VAT
£70.74 Inc. VAT
Powerland SolarEdge Floor Stand Kit for Home Battery 48V
Part No: SE-FLRSTD-4.6 Storage Systems - Battery Rack Floor stand kit for SolarEdge Energy Bank (SE-BATTERY-4.6KWH) to allow floor mounting of the battery. Supplier Part No: IAC-RBAT-5KFSTD-01 Weight: 18 kg
£103.72 Exc. VAT
£124.46 Inc. VAT
Powerland Givenergy Polar ESS 3.6kW Hybrid Inverter & 5.2kWh Battery Package
The home battery It’s sturdy, it’s super great value,and it’s safe as houses. 5 Year warranty as standard, for all systems commissioned in May, June, and July 2024 System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE INCLUDED IN PACKAGE: 3.6KW HYBRID INVERTER 5.2KWH BATTERY WIFI DONGLE WITH 1 YEAR PORTAL ACCESS GEM120 METER INVERTER TO BATTERY CABLE BATTERY FOOT 160A BATTERY BREAKER THE DIGITS HYBRID INVERTER 3.6KW 5400W max. DC power 3600W nominal AC output power IP20 rating Dimensions 20W x 195D x 475H (mm) 5 year warranty THE FEATURES 6kW of power from a single battery Over-charging and over-discharging protection Over-current protection Over and under temperature protection Short-circuit protection Clever battery reverse protection function Able to run up to 5 batteries in parallel – for a capacity of over 25kWh Seriously good cell technology – using prismatic LiFePO4 cells Balancing comes built-in to the battery management system (BMS) Fine to run as a battery-only system for charging from a cheap, split rate electricity tariff THE DIGITS HOME BATTERY 5.2KWH 92% depth of discharge Design life of 10+ years IP20 rating Dimensions: 505D x 134W 440H (mm) 3 year warranty, extendable to 5
£1,499.00 Exc. VAT
£1,798.80 Inc. VAT
Powerland Solar Edge S500 Power Optimizer
Part No: S500-MC4 Inverters - Optimisers Specifically designed to work with SolarEdge residential inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%) Supplier Part No: S500-1GM4MRM Weight: 0.68 kg Min PPT Voltage: 8 V Max PPT Voltage: 60 V DC Startup Voltage: 8 V DC Shutdown Voltage: 8 V Max Input Voltage: 60 V Max DC Power: 500 W Max AC Power (5 Minutes): 0 W Surge AC Power (1 Second): 0 W Max DC Current: 15 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 0 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years
£49.86 Exc. VAT
£59.83 Inc. VAT
Powerland Givenergy Polar ESS 3.6kW Hybrid Inverter
The Polar ESS hybrid inverter. Affordable, yes. Reliable, yes.An absolute champ of a product? Also yes. 5 Year warranty as standard, for all systems commissioned in May, June, and July 2024 System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE THE FEATURES A solar inverter and a battery inverter in one tidy little unit Two power capacity options, to meet your power needs Seriously high cost-performance ratio (aka, bang for that buck) Can be installed nice and neat in a standard server rack Loads of inbuilt safety features Supports voltage balancing function during charging (or passive balancing for the techies) Supports multiple parallel operations, so you can scale as you like Displays key info like charging/discharging voltage and current via a handy digital screen Harness up to 9kW of useful generation DC/DC charging from solar for maximum efficiency THE DIGITS HYBRID INVERTER 3.6KW 5400W max. DC power 3600W nominal AC output power IP20 rating Dimensions 20W x 195D x 475H (mm) 3 year warranty, extendable to 5
£469.00 Exc. VAT
£562.80 Inc. VAT
Powerland SolarEdge EV Charger 22kW 3PH, Socket Type 2, RFID, MID, UK
Part No: SE-EVK22URM-01 EV Charging - EV Charger SolarEdge EV Charger For United Kingdom SE-EVK22URM-01 - 22kW / 3-Phase SolarEdge EV Charger support three phase systems, providing the convenience of quick charging from home with cleaner, cheaper, renewable energy. Enables EV charging from 100% renewable energy, using excess solar power Integrates seamlessly into the SolarEdge ecosystem with monitoring and control of PV and EV from a single app Enables smart charging with our custom scheduling feature, allowing automatic charging during low-rate periods Optional RFID card authentication and MID meter* G100 Issue 2 Amendment 2 compliant** Tamper protection - designed to detect and alert of tamper attempts * Available only in SolarEdge EV Charger for Three Phase systems, PN SE-EVK22URM-01. ** Pending 4.20 firmware upgrade. This unit comes with the cable holder. It is optional to whether the cable holder is installed for this product to work. Warranty: 3 Years Supplier Part No: SE-EVK22URM-01 Weight: 7.8 kg
£1,073.00 Exc. VAT
£1,287.60 Inc. VAT
Fox ESS Fox ESS H1 3.7kW G2 Hybrid Inverter with ECS4100 Battery stack of 2 (8.06kWh)
This part is a special offer made up of the following items: Part 1 x FE-HV-ECM-4100 Fox ECS 4.03kWh HV Battery (Master) 1 x FE-HV-ECS-4100 Fox ECS 4.03kWh HV Battery (Slave) 1 x FE-H1-3.7-G2 Fox H1 3.7kW Hybrid Inverter 1PH G2 Weight: 95.05 kg
£3,255.76 Exc. VAT
£3,906.91 Inc. VAT
Fox ESS Fox ESS 5kW F Series 1PH Dual Tracker PV Inverter
Part No: FE-F5000 Inverters - Main Units Rating: 5,000W Phases: 1 FOX ESS - PV Inverter - F Series - 5kW F5000 Our Dual-MPPT F Series range includes 3.0 - 6.0kW models. The F Series is IP65 rated and battery ready for easy upgrade when paired with a Fox ESS charge controller. High Performance: Low start-up voltage, wide voltage range, 97.4% maximum efficiency. Easy Installation: Flexible configuration, plug and play set-up. IP65 Rated: Engineered to last with maximum flexibility. Suitable for outdoor installation. Remote Monitoring: Monitor your system remotely via smartphone app or web portal. Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: F5000 Weight: 15.5 kg Rated Power: 5,000 W Min PPT Voltage: 120 V Max PPT Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,000 W Surge AC Power (1 Second): 0 W Max DC Current: 25 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 0 Euro Efficiency: 96.8 % Transformer: HF MPPT Quantity : 2 Has Integrated DC Switch: Yes Warranty: 5 years
£439.20 Exc. VAT
£527.04 Inc. VAT
Powerland Enphase Q Cable Sealing Caps (1 Item)
Part No: EN-Q-SEAL Inverters - Inverter Accessories Q cable sealing caps (female) One needed to cover each unused connector on the cabling. Single item only. Supplier Part No: Q-SEAL-10 Weight: 0.02 kg
£1.92 Exc. VAT
£2.30 Inc. VAT
Powerland CTEK LITHIUM XS CHARGER AND CONDITIONER 12V 5A - 40-003
CTEK Lithium XS Charger and Conditioner 12V 5A The LITHIUM XS is an advanced microprocessor controlled charger and maintainer specially designed for Lithium (12V LiFePO4) batteries. Manufacturer Codes: 40-003 / 56-899 Charging Specifications: • Charges 12V Batteries • Charges batteries of 5Ah - 60Ah • Trickle charges batteries up to 120Ah • Can charge Lithium batteries • Comes with croc clips and eyelet connectors Brand CTEK Charge Voltage 12 V Charge Rate 5 A Length 168 mm Width 65 mm Height inc. terms 40 mm Lithium Charge Capacity (up to) 5 Ah - 60 Ah Trickle Charge 1 Ah - 120 Ah Guarantee 5 Years Barcode (EAN) 7340103400035
£96.18 Exc. VAT
£115.42 Inc. VAT
Powerland GivEnergy *GEN3* 5kW Hybrid + 2.6kWh Battery Bundle
Cut your costs with smart green energy solutions. With GivEnergy technology, you can power your home or business cheaply and sustainably. Become part of a cleaner world. With GivEnergy batteries installed, you can: - Store energy from the grid, solar, wind, or hydro - Use that stored energy to power your home - Avoid high peak charges, outages, and grid dependence GivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package. The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems. This Bundle Includes: 1 x GivEnergy Gen 3 5kW Hybrid Inverter 1 x GivEnergy 2.6kWh Battery 1 x GivEnergy 100A DC Breaker 1 x GivEnergy Gem120CT Meter 1 x GivEnergy All-in-One to Ring Terminal Cable
£1,859.67 Exc. VAT
£2,231.60 Inc. VAT
Powerland Champion 3600 Dual Fuel Generator
Our newest Dual Fuel Inverter Generator! Our 3600 watt inverter generator features Dual Fuel technology allowing the 212cc engine to run on petrol or propane. Enjoy the quiet 61 dBA for up to 14 hours on petrol or up to 21 hours with a 9kg propane tank and increase your power with the optional Parallel Kit. Champion Inverters boast a unique feature with a digital 15 second power delay, which allows sensitive equipment to be left plugged in on start-up & shut down, a component unlike any other Generator. The OHV engine is equipped with a low oil shut-off sensor and designed for long life and easy maintenance. This unit also contains true sine wave inverter technology making it safe to power all of you sensitive electronic devices. Ideal for camping trips, hunting, travelling, picnics, tailgating, and light jobs around the house. The built-in handle and wheel kit make it easily portable.
£985.00 Exc. VAT
£1,182.00 Inc. VAT
Powerland Tigo Cloud Connect Advanced Kit with TAP- Indoor
Part No: TIGO-CLOUDCON-TAP Display - Web Interfaces Cloud Connect Advanced kit for intdoor use, including CloudConnectAdvanced, TAP and DIN rail power supply. CLOUD CONNECT ADVANCED (CCA) COMPACT DATA LOGGER Collect data from up to 900 TS4 units Supports wired and wireless networks Control monitoring and safety features Configure and commission with Tigo SMART app Monitor 3rd party devices via Modbus Can communicate with up to 7 TAPs TIGO ACCESS POINT (TAP) WIRELESS ACCESS POINT Collect data from up to 300 TS4 units Wireless mesh communication High definition sampling rate Scalable architecture Mounts easily on module frame without tools Please Note - Registration with the Tigo Monitoring service must be completed in 90 days from the Warranty Start Date for Limited Warranty to be valid, for the following Equipment: TS4-M, -S, -O, -L, Tigo Access Point, and Cloud Connect Advanced when implemented with communication. Supplier Part No: 344-00000-52 Weight: 0.41 kg
£171.00 Exc. VAT
£205.20 Inc. VAT
Powerland Solis Data Logging Stick - Wi-Fi & LAN 4-Pin
Part No: SOL-S2-WL-ST Display - Web Interfaces The Solis 2-in-1 datalogger is suitable for areas covered by Wi-Fi or LAN signals, data collection is faster, wider, and more reliable by uploading directly through to Solis Cloud. Supports Wi-Fi or LAN communication Plug and play - convenient and fast Fault alarm, real-time monitoring LED Status indicators for Power, Network, and Inverter Communication Reset button - one key to send data for convenient debugging 4-pin connector for COM port on all Solis inverters 2-year standard Solis accessory warranty. Supplier Part No: SOL-S2-WL-ST Weight: 0.16 kg
£59.30 Exc. VAT
£71.16 Inc. VAT
Powerland Solis 5-way communication cable
Part No: SOL-5-IN-1-RS485 Display - Web Interfaces If you need to collect data from multiple inverters this cable helps you to establish a communication connection between the inverters. This cable helps you to connect multiple inverters in daisy chain. Just connect the cable in the inverter RS485 port from inverter 01 to 05. Distance between inverter links is 2.5m Supplier Part No: SOL-5-IN-1-RS485 Weight: 0.94 kg
£44.45 Exc. VAT
£53.34 Inc. VAT
Powerland MC4 Pre terminated cable 5m (Pack of 2)
Part No: MC4-5M-2 Cables - Pre Terminated Cables Keywords: MC4 10M2, 1xMale, 1xFemale each cable, MC4. Stäubli, PV Cable, Pre Terminated Cable Please note: 6mm cable may be substituted at the 4mm price when 4mm cable is out of stock. A mix of 4 and 6mm will be provided Supplier Part No: 100038568 Items in this pack: 2 Weight: 0.58 kg Length: 5 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44
£24.16 Exc. VAT
£28.99 Inc. VAT
Powerland MC4 Female Connector 10 Pack
Supplier Code:32.0014P0001: Female cable coupler as individual part (including insulating part) Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables. Supplier Part No: 32.0014P0010-UR Weight: 0.01 kg
£16.41 Exc. VAT
£19.69 Inc. VAT
Viridian Solar Connector Enclosure ArcBox (Single part)
Solar connector enclosure Reducing Fire Risks in Solar PV The number of solar installations is growing fast and with it the risk that mistakes assembling DC connectors lead to fires. The ArcBox enclosure simply snaps around a DC connector to ensure that if an arc ever occurs it is safely contained and doesn’t spread to combustible materials in or around the solar installation. The effectiveness of the product has been independently verified by the KIWA fire test laboratory and Loughborough University. BIPV Combustible Roofs High-Consequence Locations Supplier Part No:ARC-04 Weight:0.41 kg
£21.17 Exc. VAT
£25.40 Inc. VAT
Powerland Elettro Brescia 6mm2 single-core 100m - Red
Part No: CABLE6-1-100-R Cables - DC Cables Supplier Part No:E6S10060BK100 Weight:7.63 kg Length:100 m Area:6 mm2 Colour:Red Cores:1 - N Max Current:41 Max Voltage:1800
£93.00 Exc. VAT
£111.60 Inc. VAT
Cable_World Elettro Brescia 4mm2 single-core 50m - Red
The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.
£44.71 Exc. VAT
£53.65 Inc. VAT
Powerland Battery to Inverter Cable Pack Long for Sunsynk (BYD)
Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack. Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg
£48.65 Exc. VAT
£58.38 Inc. VAT
Powerland Battery to Battery Cable Pack Short for Sunsynk CATL only
Part No: SUN-CABLE-SHORT Storage Systems - Accessory Battery to Battery short cable pack. For Sunsynk CATL battery only. Does not work with Sunsynk BYD battery. Supplier Part No: Battery Cable Pack Short for Sunsynk Weight: 0.2 kg Length: 0.3 m
£58.31 Exc. VAT
£69.97 Inc. VAT
Powerland GSE Frame Portrait DPO - 1840/1135
Part No: GSE-FRAME-DPO-1840-1135 Mounting - In Roof Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! To generate a design please use GSE's own configurator attached in the documents tab of this product page. Supplier Part No: ART105211 Weight: 3 kg
£24.73 Exc. VAT
£29.68 Inc. VAT
Powerland Sunsynk Lifelynk X 3.84kW Battery with SUN-LIFE3.6X-HYB Hybrid Inverter All-In One
Details The new Sunsynk Lifelynk X 3.6kW LIFE3.6X-HYB Hybrid Inverter by Sunsynk Mobile is a true all-in-one, plug-and-play, expandable inverter that has been created to simplify and speed up installation.The dedicated Sunsynk Connect Platform enables full control, visibility, and access to the system, making site-specific customisation easy.The Sunsynk Lifelynk X 3.6kW LIFE Hybrid Inverter comes complete with everything you need to install this cutting-edge storage solution. In-built connection points give access to the Load, Grid, CT, and WiFi data logger ports, making it a true "plug and play" system.From the pre-set factory settings to the in-built connection ports, the Sunsynk Lifelynk X 3.6kW SUN-LIFE3.6X-HYB Hybrid Inverter has been designed with convenience and hassle-free installation in mind. Features: Small and Mighty - An ideal solution for smaller properties, social housing and local government projects Power Built-in - 3.6kW hybrid inverter, 3.84kWh LiFePO4 battery and a 4.5kW MPPT all in one compact unit EPS Function - Includes option for 3.6kw Output for Essential Loads Easy to Install - Everything you need included in one solution with easy access to ports and a wall mountable bracket Plug and Play - Get up and running quickly Convenient and Hassle-free - The Lifelynk has been designed with easy installation in mind Maximum Power Output - 3600w Dimensions - 700.6 x 534.6 x 182.2mm Weight - 57.4kg This product is perfect for retrofitting into a current solar PV install. It would need to suit the power rating of the current solar array. The built-in battery is also expandable to a higher capacity at a later date if required. The Sunsynk Lifelynk X also has the ability to power an emergency power system in case of a power cut. It will also suit installation alongside an EV charger too.
£1,495.34 Exc. VAT
£1,794.41 Inc. VAT
GSE Junction for Top Flashing BLACK - ART100039
Part No: GSE-JUNCTION-BLA Mounting - In Roof Supplier Part No: ART100039 Weight: 0.4 kg
£7.53 Exc. VAT
£9.04 Inc. VAT
Powerland GSE Rooflex Flexible Sealing Strip 500mm x 5m
Part No: GSE-ROOFLEX-5M-0.5M Mounting - In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents. Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications. Supplier Part No: ART101405 Weight: 2.01 kg
£84.92 Exc. VAT
£101.90 Inc. VAT
Powerland GSE Single clamp black 30mm -Ground Mount
Part No: GSE-GM-S-CLAMP-B-30 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system. The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART104665 Weight: 0.085 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.
£2.55 Exc. VAT
£3.06 Inc. VAT
