Solar Panel Fitting & Mounting Kits

  Clenergy’s PV-ezRack SolarRoof Pro is a roof-mounting solution suitable for most types of pitched and flat roofs. Using our innovative PV-ezRack Rail, Z-modules and roof hooks, PV-ezRack SolarRoof Pro is one of the most versatile rooftop solutions in the world, delivering a safe and cost-effective solution to installers.   Supplier Part No: C-U/30/46 Weight: 0.072 kg Clip Type: 199 Clip H: 46 mm Clip B1: 0 mm Clip Colour: Silver  

Read more less

These nuts sit in the profile of Fastensol rail, and can be spun unto bolts for fixing components to the rail. System features and specifications: Suitable for pitched and flat roofs Cladding type: tiled, slate and sheet metal (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: aluminium Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

These heavy-duty 200mm hanger bolts are suitable for fixing mounting rail to metal or corrugated cement roofs with steel supports, and come supplied with EPDM seal and two nuts, as well as a substantial steel or aluminium L-bracket. The bracket locks between the upper two nuts and is height adjustable.   Not MCS certified.

Read more less

Part No: GSE-FRAME-DPO-1840-1135 Mounting - In Roof Please note; These frames are ordered in halves. 2 frames are required per module - this product is simply showing the upper or lower half of a single frame. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE SEGEN OR GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!  Notice: The DPO frames are not currently supported in the Segen design tool. To generate a design please use GSE's own configurator attached in the documents tab of this product page.   Supplier Part No: ART105211 Weight: 3 kg

Read more less

Part No: GSE-JUNCTION-BLA Mounting - In Roof   Supplier Part No: ART100039 Weight: 0.4 kg  

Read more less

Part No: GSE-ROOFLEX-5M-0.5M Mounting - In Roof This flexible sealing strip can be used to provide a continuous waterproof border along the bottom edge of the PV array. It can also be used for the top edge of the array instead of upper flashing conponents.  Easily malleable for various applications Pre bent to facilitate folding and alignment Ease of use thanks to its low weight Underside butyl with high adhesion Easily malleable for various applications.   Supplier Part No: ART101405 Weight: 2.01 kg  

Read more less

Part No: GSE-GM-S-CLAMP-B-30 Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART104665 Weight: 0.085 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-BOLT-CORNER-PIECE-FIX Mounting - Ground Mount M6 Screw and washer - corner fix (pack of 100) The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100125 Items in this pack: 100 Weight: 0.1 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience.   

Read more less

Part No: ESD-1008020-B Mounting - Pitched Roof The Clickfit Evo universal module clamp is made of high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp comes standard assembled and is suitable for all framed solar panels with a thickness between 30 and 50 mm. Due to the clever design it can be used as a middle clamp and - in combination with the end cap - also as end clamp. The design also provides for potential equalization between the solar panels. The universal module clamp bites through the anodization layer of the solar panel and ensures that the solar panels are interconnected when the system is to be grounded. The clampsstandard equipped with theft delay screws and are available in the colours black and grey.   Supplier Part No: 1008020-B Weight: 0.058 kg  

Read more less

Part No: ESD-1003016 Mounting - Flat Roof Quick and easy to install Unique click design Only one tool needed Also available in black Meets all international safety requirements   Supplier Part No: 1003016 Weight: 0.01 kg

Read more less

Part No: SLT-131121-001 Mounting - Module Clips Rapid16 The new clamp range  Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.  The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131121-001 Weight: 0.049 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver  

Read more less

Part No: SLT-129002-002 Mounting - Rail Connectors Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA. Ersetzt durch SLT-129060-000 für SA. Supplier Part No: 129002-002 Weight: 0.17 kg

Read more less

Part No: SLT-110010-200 Mounting - Roof Anchor- Hanger Bolts Hanger bolts   Roof cladding: Corrugated roofs & trapezoidal sheet Hanger bolts For corrugated sheets (such as those of fiber cement) or trapezoidal sheet metal roofs, so-called fastening kits for corrugated roofs are used, comprising a special hanger bolt with EPDM gasket (will need additional mounting plate). Please note that thread lengths can deviate from the corresponding figures. Hanger bolt kit with vulcanized EPDM gasket (UV-resistant) and 3 high-grade steel flange nuts (V4A), assembled Hanger bolt kit 10 × 200 assembled M10 × 200 mm This hanger bolt is suitable for wood purlins / sub structure.   Supplier Part No: 110010-200 Weight: 0.12 kg PV Light: SLT1

Read more less

Part No: SLT-131101-001 Mounting - Module Clips Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design.   Supplier Part No: 131101-001 Weight: 0.04 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver

Read more less

Part No: GEN-SLATE-NEW Mounting - Roof Flashings The SolarFlash™ system is a simple and effective waterproof solution to refitting roofing slates or tiles around a roof bracket when installing solar photovoltaic, or other, panels. By installing with SolarFlash™, it can help you to ensure that all your installations are MCS 012 compliant. SolarFlash™ is very easy to install and enables you to do an excellent job and leave the roof with a clean, reliable and weatherproof finish, without any additional expert knowledge or training. Why you need SolarFlash™ The existing method of dressing a flashing material around the bracket is fundamentally flawed, as the bracket moves and in doing so can move the flashing material, which can potentially lead to damaged or cracked slates. This impacts on the weathertightness of the roof and means that the installation is not MCS 012 compliant. Parts included are: 1 x Large SolarFlash (364mm by 364mm) 1 x Weather stop Foam 2 x Shims   Designer note: The Genius refit kits are compatible with most roof anchors but be aware a 30mm step up distance is required from the anchor fixing plate and the arm of the roof anchor. Generally this means anchors designed for plain tiles are most suited and certain products are not compatible.Non compatible components are: : SCH-256313, SCH-257125, SCH-256315, SLT-102001-000, SLT-102001-001, REN-920005.    Supplier Part No: SFS001 Weight: 0.24 kg

Read more less

The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.   Supplier Part No: ER-R-PRO4600 Weight: 3.4 kg Length: 4.6 m

Read more less

SDM120D meters have been produced to offer a low-cost solution to metering low Amp circuits. The SDM120D - single direction range, work directly connected to a maximum load 45A AC circuit.  This SDM120DB version comes with a backlight making it easier to take readings  Active Energy Measured 45A Direct Connection Pulse Output 1 Module Wide 35mm Din Rail Mounting Measurements: H - 119mm W - 17.5mm D - 62mm Warning: This is a DIN rail mounted meter and will need to be housed in a DIN rail enclosure   Supplier Part No: SDM120DB Weight: 0.081 kg

Read more less

Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable   Part Code: ECA2.v     Does not come with CT's. Supplier Part No: ECA2VETC Weight: 0.305 kg

Read more less

The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers.

Read more less

The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers The solution offers simple and fast installation, versatile application, compatible with all our PV panels and Clenergy does not compromise the product quality. Key Features: High grade anodized aluminium and stainless-steel components Suitable for most residential roof applications Compatible with most framed Solar PV Modules

Read more less

Self-drilling Universal Screw, Buildex 14-11 x 70 Hex Head Zips Climaseal 5 with 16 mm ABW The solution offers simple and fast installation, versatile application, compatible with all our PV panels and Clenergy does not compromise the product quality.

Read more less

Part No: GSE-ART106051 Mounting - Wood Screws In-Roof Screw 6.5x60 mm - EPDM - A2 - BLACK Keywords: GSESCREWBLA, GSE, PV Mounting, In Roof, gse in roof

Read more less

Part No: GSE-FRAME-DPO-2030-1135 Mounting - In Roof This new product GSE Portrait Half-Frame H2030: allows the safe and simple integration in Portrait format of 500w+ PV modules. from 1990 to 2180 mm in height from 991 to 1305 mm in width benefits from the experience of its predecessors Half-Frame H1650 and H1840 in terms of conception and installation launched over a year ago has been tested by recognized laboratories in Europe to guarantee the strength and durability of the installation.   CLAMP ATTACHEMENT POINTS: Due to the increased surface area and weight of the modules compatible with this XXL frame range (around 2.5 m² and 30 kg) and in order to ensure the mechanical stability of the modules, we recommend doubling the number of middle and end clamps when installing the modules

Read more less

Part No: GEN-INTERFLASH Mounting - Roof Flashings InterFlash™ Kit 1 x plastic InterFlash™ to sit under the Renusol RH Flat bracket.   Supplier Part No: InterFlash Weight: 0.32 kg

Read more less

Part No: GEN-SPEEDFLASHSHIELD Mounting - Roof Flashings SpeedFlash® Shield is a tool that installers will need during installation to protect the lower course of slates. A SpeedFlash® Shield should last at least 40 SpeedFlash® installs, this will be determined by the user. The shields purpose is to protect the lower course of slates. Take care to avoid contact with angle grinder to prolong shield life. Supplier Part No: SPF008 Weight: 0.4 kg

Read more less

Part No: GSE-GM-FRONTAL-BRCKT Mounting - Ground Mount Frontal view of bracket (thickness 3mm) – Z profile bottom part (thickness 3mm) The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100002 Weight: 0.1 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

The Fastensol plastic tray can be extended using their mini 140mm rail. This allows panels of widths of up to 1140mm to be mounted in landscape configuration using these Fastensol trays.   Kit Includes: 1 x Fastensol Plastic Tray 4 x 140mm Mini Rail   This kit does not include: Fastensol aluminium End Clamp  (4 per tray) When fixing the 4x 140mm mini rails, you will need to drill additional holes on the side of the plastic trays. Please note that a lower ballast weight than the minimum weight on the datasheet can be used if stated by the ballast calculator

Read more less

These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, such as a butler roof. Simply use a 13mm spanner to tighten the bolts on the hook and it will clamp onto the standing seam. You can then attach whatever you wish onto the 11mm slot on the top of the clamp. Needs an L bracket or cross connect to attach to the rail.

Read more less

These H rails are a special design for use on bespoke projects. For example they are ideal for mounting directly onto Triangle mounts, for our Narrowboat Tilt system and for use in the GSE Ground Mount System kit. Fastensol offer a splice / joiner for the H rail. System features and specifications: Dimensions: 3300 x 55 x 28 mm Suitable for pitched and flat roofs Material: aluminium Color: Natural

Read more less

Fastensol mini rail to secure panels in portrait to trapezoidal sheet metal roofs. Complete with self tapping screws.  Length 400mm*width 30mm *height 30mm Holes are not pre drilled on the portrait rail. Please be aware that this product is currently awaiting MCS certification. It does not currently have an MCS code Product code: F-MNR-GS

Read more less

To fit, a few tiles are removed from the outside of the roof and the hook secured to a rafter pointing 'downhill' with the tek screws provided. Plywood padding can be used to ensure the correct spacing from the tile surface. The tiles are then replaced around the hook. A weatherproof finish can best be achieved using flashing or the Genius Solarflash. Some installers also use Hookstops. System features and specifications: Suitable for pitched and flat roofs Cladding type: flat / plain / rosemary / biscuit / peg tiles (other roof mounts also available) Maximum slope: 60 degrees Wind load: up to 60m/s Snow load: 2.0kn/m2 Maximum building height: 20m Material: stainless steel Color: silver MCS 012 certification Warranty: 12 years durability on material, 5 years on finish Manufacturer: Xiamen Fasten Solar Technology Co., Ltd

Read more less

Part No: GSE-ENDCAP-RAIL-PLUG Mounting - Rail End Caps RAIL END CAPS  Supplier Part No: ART101691

Read more less

Part No: VIR-ARC-M01-01 Mounting - Fixings The VIR-ARC-M01-01 is a Rail Mounting Bracket which fixes to a solar panel rail with either 8mm or 10mm T-Bolt. The bracket can be rotated before fixing to align the VIR-ARC-04 with the cabling route. Due to the finished height of the VIR-ARC-04 above the rail, The VIR-ARC-M01-01 Bracket is more suitable for flat roofing systems and VIR-ARC-M02-01 is more suitable for pitched roof systems.   Supplier Part No: ARC-M01-01 Weight: 0.8 kg

Read more less

Part No: GSE-CLAMP-SINGLE-H21-BLA Mounting - Module Clips   Supplier Part No: ART100495 Weight: 0.028 kg

Read more less

Part No: GSE-GM-LATERAL-LF-RT Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART102859 Weight: 3.643 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-FRNT-BCK-BASE Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART102852 Weight: 1.912 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-CORNER-PIECE-FIX Mounting - Ground Mount Corner Piece L (thickness 2mm) fixed length 550mm. The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No: ART102873 Weight: 0.863 kg Length: 0.55 m GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-BOX-BASE Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!

Read more less

Part No: GSE-GM-REAR-BRCKT Mounting - Ground Mount Back” bracket view - Z profile top part (thickness 3mm) The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No: ART100036 Weight: 0.112 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-NUT-2PER-SQR-T Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART100213 Items in this pack: 20 Weight: 0.002 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-CORNER-PIECE-ADJUST Mounting - Ground Mount Corner Piece L (thickness 2mm) adjustable length: delivered 1233mm The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART102880 Weight: 1.925 kg Length: 1.23 m GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-NUT-CORNER-PIECE-T Mounting - Ground Mount The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Alternative to roof installations (lack of space, old roof, etc.). Quick, Simple and safe to install, in less time and with fewer installation costs. Easy attachment of micro-inverters or optimizers it is fitted as portrait for reduced size in any type of ground or garden. Two fixing solutions: ➜ Fixing on Z bar ➜ Fixing on rail mounting Optional mounting plate for use of a protective box at the rear of the system.    The system is less than 1.80 m high, so no administrative formalities are required for it simplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE! Supplier Part No: ART101184 Items in this pack: 100 Weight: 0.1 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. 

Read more less

Part No: GSE-GM-BOLT-2PER-SQR Mounting - Ground Mount M10 SCREW & WASHER - TRY SQUARE FIXATION The GSE GROUND SYSTEM has been designed to allow the installation of 95% of photovoltaic modules on the ground. Its robustness and its material guarantee makes it a perfectly designed product for a quick and reliable execution. Alternative to roof installations (lack of space, old roof, etc.). Solves space problems: > Installation in portrait and not landscapefor space reduction Suitable for all gardens > No problem with the height of the lawn , facilitates the mowing  Compatible with all module sizes Easy attachment of micro-inverters or optimizers 3 Easy and safe to install > Ballasting possible with all types of materials > No work on the roof. Compact and lightweight format 100 % recyclable  Optional mounting plate for use of a protective box at the rear of the system.  The system is less than 1.80 m high, so no administrative formalities are required for itsimplementation. MODULE SIZES ARE CONSTANTLY CHANGING, PLEASE MAKE SURE YOU USE GSE DESIGN TOOLS WHEN CHOOSING CORRECT FRAMES FOR YOUR MODULE!   Supplier Part No: ART100938 Items in this pack: 20 Weight: 0.002 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience

Read more less

Part No: ESD-1008085 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1008085 Weight: 0.008 kg

Read more less

Part No: ESD-1008063 Mounting - Pitched Roof The Clickfit Evo roof hook filler rubber is made of high quality EPDM rubber. The balanced composition will dry out and prevent cracking. The rubber seal ensures a stable location of the Clickfit Evo roof hook on the roof tile. Placing an outflow rubber lowers the point load and makes superfluous unnecessary for pans with a water barrier. This keeps the flood defense and the strength of the roof tile intact. By folding the rubber a space of 5 to 15 mm can be filled.   Supplier Part No: 1008063 Weight: 0.033 kg

Read more less

Part No: ESD-1008040 Mounting - Pitched Roof Quick & flexible installation with the ClickFit EVO Universal Roof Hook Universal Roof Hook for all roof tile/batten combinations Easy mounting process from the top Stepless adjustment of height and width Better point load distribution, lower risk of tile breakage and leakage Self-aligning click connection: easier and faster Can be used for horizontal and vertical mounting - Integrated cable management.   Supplier Part No: 1008040 Weight: 0.503 kg

Read more less

Part No: ESD-1007022-WP Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty Contains mounting in the new metal insert.   Supplier Part No: 1007022-WP Weight: 0.055 kg

Read more less

Part No: ESD-1000612 Mounting - Flat Roof FlatFix Fusion is a product that has proven itself over many years: the modular and flexible system for flat roofs. FlatFix is an ideal mounting solution for solar panels on medium and smaller roofs. Product Features EASY TO INSTALL Optimizer ready cable clip for easy attachment and safe cable removal Optimizer clip can also be used for most micro inverters SAFETY FOR THE ROOF Unique thermal decoupling prevents damage to roof material Optimum point pressure due to distributed ballast Integrated grounding and bonding in accordance with IEC 60364 series FLEXIBLE AND EASY Completely modular system Easy to build around obstacles Single or dual setup Suitable for residential and commercial projects RELIABLE Wind deflectors designed for maximum safety Tested to international standards 20-year warranty   Supplier Part No: 1000612 Weight: 0.005 kg

Read more less