Powerland is a proud dealer of Victron Energy products, offering a comprehensive selection for off-grid, marine, and mobile applications. From inverters to solar chargers, Victron is known for its reliability and innovation.
Victron
Victron Victron Energy Shunt 2000A/50mV-0,5 / 3xM10 – SHU202050200
Brand Victron Energy Manufacturer Part Number SHU102050200 Warranty 5 Years
£81.20 Exc. VAT
£97.44 Inc. VAT
Victron Victron Energy CAN-bus Temp. sensor – ASS000200100
Temperature sensing is needed when LFP lithium batteries are charged at low temperatures. The charge current to a lithium battery has to be reduced once the battery temperature drops below 5 degrees and the charge current has to stop when the temperature drops below zero. The CAN-bus Temp. Sensor takes care of this. It measures the lithium battery temperature and sends this to the Buck-Boost DC/DC converter. The Buck-Boost DC/DC converter will reduce or stop charge when the battery temperature drops too low. In addition to this, the CAN-bus Temp. Sensor can also be connected to the temperature sensor terminal in a Multi or Quattro, so the Multi or Quattro can reduce or stop charging when the battery temperature drops too low. Brand Victron Energy Manufacturer Part Number ASS000200100 Supply voltage 4.36VDC Electricity consumption 60 mA (@13.6V) Alarm output (pin 5) 350 mA Open connector (switches to GND/Earth) Dimensions L57.6 x W40 x H15.8mm (incl. connectors) Weight 0.012Kg Warranty 5 Years
£82.90 Exc. VAT
£99.48 Inc. VAT
Victron Victron Energy Blue Smart IP67 Charger 12/17 (1) 12V 17A UK – BPC121747026
Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on.
£83.16 Exc. VAT
£99.79 Inc. VAT
Victron Victron Energy Power Inlet stainless steel with cover 32A (2p/3w) – SHP303202000
Brand Victron Energy Manufacturer Part Number SHP303202000 Current Rating (A) 32 Standard IEC 60309, 2p+E Cover Solid cast 316 Stainless Steel Weight (kg) 0.65 Warranty 5 Years
£83.30 Exc. VAT
£99.96 Inc. VAT
Victron Victron Energy Monocrystalline Solar Panel 24V 215W 1580x705x35mm Series 4b – SPM042152402
5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
£97.65 Exc. VAT
£117.18 Inc. VAT
Victron Victron Energy VE.Bus to VE.Can Interface – ASS030520115
Brand Victron Energy Manufacturer Part Number ASS030520115 GTIN 8719076019527 Weight 0.06Kg Warranty 5 Years
£98.70 Exc. VAT
£118.44 Inc. VAT
Victron Victron Energy Blue Smart IP67 Charger 12/25 (1) 12V 25A UK - BPC122547026
Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on
£108.36 Exc. VAT
£130.03 Inc. VAT
Victron Victron Energy GX LTE 4G-E – GSM100100400
There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area. It requires a SIM card of the Mini-SIM format; and connects to the GX device with an included 1 meter USB cable. The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal. Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years
£129.00 Exc. VAT
£154.80 Inc. VAT
Victron Victron Energy CANvu GX IO Extender and wiring kit – BPP900800100
CANvu GX IO Extender and wiring kit. Brand Victron Energy Manufacturer Part Number BPP900800100 Warranty 5 Years
£131.40 Exc. VAT
£157.68 Inc. VAT
Victron Victron GX LTE 4G-A Cellular Modem for GX Devices – GSM100200400
Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years
£131.72 Exc. VAT
£158.06 Inc. VAT
Victron Victron Energy Shunt 6000A/50mV – SHU602050200
Brand Victron Energy Manufacturer Part Number SHU602050200 Warranty 5 Years
£188.34 Exc. VAT
£226.01 Inc. VAT
Victron Victron Energy Energy Meter EM24 – 3 phase – max 65A/phase – REL200100000
The EM24 is for 3 phase monitoring only. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX. The Energy Meter can be used as a: Grid meter, and used as control input for an ESS System. Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL200100000 Warranty 5 Years
£199.91 Exc. VAT
£239.89 Inc. VAT
Victron Victron Energy VE.Can resistive tank sender adapter – BPP900600100
When you use a Skylla-i or a MPPT with CAN bus in the system, the power to the CAN bus will be supplied by either one of them. When the CAN bus is not powered by a Skylla-I or a MPPT, you will need the new VE.Can Power Cable to supply the power. Brand Victron Energy Manufacturer Part Number BPP900600100 Warranty 5 Years
£206.00 Exc. VAT
£247.20 Inc. VAT
Victron Victron Energy Interface 1140 – ASS030510000
The assistant ‘Use 1140 interface to set shore limit assistant’ can be used in Multi(C) or a Quattro. It is connected just as a MK2 with use of an UTP cable. Remark: the unit must have firmware xxx2xx or higher in order to use assistants Brand Victron Energy Manufacturer Part Number ASS030510000 Warranty 5 Years
£259.03 Exc. VAT
£310.84 Inc. VAT
Victron Victron Energy EV Charging Station - EVC300400300
It incorporates 4.3-inch LCD touch screen for monitoring and control. Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance. GTIN 8719076051305 Input Voltage Range 170 – 265V AC Rated Charge Current 32A / phase Nominal Power 22kW Current Output Range 6 – 32A Data Communication Modbus TCP over WIFI Protection Category IP44 Dimensions H390 x W300 x D150mm Weight 3Kg Warranty 5 Years
£323.34 Exc. VAT
£388.01 Inc. VAT
Victron Victron Energy CANUSB Interface – ASS030532010
Brand Victron Energy Manufacturer Part Number ASS030532010 Warranty 5 Years
£330.00 Exc. VAT
£396.00 Inc. VAT
Victron Victron Energy EV Charging station NS – EVC200300200
The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN. The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system. It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status. Features WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both, the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around the charging port to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power can be regulated in different ways: by using the web interface, from a GX device and VRM and via VictronConnect. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station NS from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.
£342.30 Exc. VAT
£410.76 Inc. VAT
Victron Victron Energy Anti-islanding relay UFR1001E – REL100100000
Brand Victron Energy Manufacturer Part Number REL100100000 Dimensions H90 x W105 x D69mm Weight (kg) 0.25 Warranty 5 Years
£520.00 Exc. VAT
£624.00 Inc. VAT
Victron Victron Energy Anti-islanding box 63A single and three phase – RCD000300200
Brand Victron Energy Manufacturer Part Number RCD000300200 Warranty 5 Years Country of Manufacture Germany
£720.00 Exc. VAT
£864.00 Inc. VAT