Products

 DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX.   Brand Victron Energy Manufacturer Part Number ADA500100100 GTIN 8719076048640 Warranty 5 Years Country of Manufacture India

Read more less

  Brand Victron Energy Manufacturer Part Number ADA500100100 GTIN 8719076048640 Warranty 5 Years Country of Manufacture India

Read more less

  The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. Brand Victron Energy Manufacturer Part Number BCD000402000 Maximum Continuous Current (A) 40 Number Of Batteries 2 Connection M6 Bolts Dimensions H60 x W120 x D75mm Weight (kg) 0.8 Warranty 5 Years

Read more less

The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V Brand Victron Energy Manufacturer Part Number BCD000802000 Maximum Continuous Current (A) 80 Number Of Batteries 2 Connection M6 Bolts Dimensions H60 x W120 x D75mm Weight (kg) 0.8 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030530010 Warranty 5 Years

Read more less

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX. Brand Victron Energy Manufacturer Part Number ASS030530010 Warranty 5 Years Country of Manufacture India

Read more less

Dual terminal stud M8 (5/16″) Max.current: 150A Max. Voltage70: VDC Terminal diameter: M8 (5/16 inch) Terminal height: 17mm/ 0.67 inch Terminal material: Stainless steel Hex nut material: Stainless steel Recommended torque: 10 N-m/ 90lbf-inch Busbarstrip material: Tin-platedcopper(1.0x 13mm) Base material: Glass fiber reinforced nylon

Read more less

Features of the - Victron Energy EasyPlus Compact 12V/1600VA 70-16A - 230V Multi-functional power solution The EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure. The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures. Optimum comfort and safety The EasyPlus guarantees uninterrupted power supply, whenever and wherever you are. Where shore or generator power is limited, the unique PowerAssist® technology makes it possible to boost the total capacity by adding extra energy from the batteries. Optimum safety is guaranteed with the integrated RCD (Residual Current Device) protecting against earth leakage.  

Read more less

The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures. Brand Victron Energy Manufacturer Part Number CEP121620000 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 1600 Peak Power (W) 3000 Max Efficiency 92% Zero Load Power (W) 8 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Optional Protection Category IP21 Dimensions H510 x W214 x D110mm Weight (kg) 11.7 Warranty 5 Years Country of Manufacture China  

Read more less

The EasySolar 12/1600-70-16 combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar 12/1600-70-16 All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar 12/1600, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar to connect to a computer for configuration and firmware updates. Looking to go off grid? Why not look at the TN Power lithium battery range. A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Brand Victron Energy Charge Current Starter Battery 4A Warranty 5 Years Weight 15Kg

Read more less

Features All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.   The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.   The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.   AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.   PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.   Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.   Brand Victron Energy Manufacturer Part Number CEP121620000 GTIN 8719076021599 Voltage 12V Transfer Switch 16A Continuous Output Power at 25°C 1600VA/1300W Peak power 3000W Charger Current House Battery 70A Battery Temperature Sensor Yes Programmable Relay Yes Ingress Protection IP22 Battery-Connection Battery cables of 1.5 meter Dimensions (Including Terminals) H745 x W214 x D110mm Weight 15Kg Warranty 5 Years Country of Manufacture China

Read more less

The EasySolar 24/1600-40-16 combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar 24/1600-40-16 All-in-one solar power solutionThe EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar 24/1600, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar to connect to a computer for configuration and firmware updates. Looking to go off grid? Why not look at the TN Power lithium battery range. A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Brand Victron Energy Charge Current Starter Battery 4A Warranty 5 Years Weight 15Kg

Read more less

The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.   Features All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.   Brand Victron Energy Manufacturer Part Number CEP241621010 GTIN 8719076021605 Voltage 24V Transfer Switch 16A Continuous Output Power at 25°C 1600VA/1300W Peak power 3000W Charger Current House Battery 40A Battery Temperature Sensor Yes Programmable Relay Yes Ingress Protection IP22 Battery-Connection Battery cables of 1.5 meter Dimensions (Including Terminals) H745 x W214 x D110mm Weight 15Kg Warranty 5 Years

Read more less

Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16 character display These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and wifi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery A USB port A Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP242307010 GTIN 8719076049265 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 94% Bluetooth Compatible Yes Dimensions H499 x W268 x D237mm Weight 26Kg Warranty 5 Years

Read more less

Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16 character display These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and wifi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery A USB port A Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP482307010 Voltage 48 Transfer Switch (A) 32 Continuous Output Power at 25°C 3000VA/2400W Peak Power (W) 5500 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Ingress Protection IP21 Battery-Connection M8 Bolts Dimensions (Including Terminals) H506 x W275 x D237 mm Weight (kg) 26 Country of Manufacture India Warranty 5 Years

Read more less

The EasySolar-II 48/5000 GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar-II 48/5000 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device on the EasySolar-II includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar-II 48/5000 GX, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50 The MK3-USB allows the EasySolar-II to connect to a computer for configuration and firmware updates.

Read more less

Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16 character display These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and wifi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other wifi enabled device. In addition, wifi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A VE.Can interface. This can be used to connect to Victron VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery A USB port A Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP482507010 GTIN 8719076049333 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 96% Bluetooth Compatible Yes Dimensions H604 x W323 x D253mm Weight 38.6Kg Warranty 5 Years

Read more less

Simply access your system via the Victron Remote Management (VRM) portal, or access it directly, using the built-in touchscreen, a Multi-Functional Display (MFD) or the VictronConnect app thanks to its Bluetooth capability. The Ekrano GX is also the successor  to the Color Control GX.   Features Perfect monitoring & control Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely. The Ekrano GX turns any power challenge into an effortless experience.   Expand your view The integrated 7 inch touchscreen allows you to have an instant overview of your system and adjust settings in the blink of an eye. Its super slim waterproof design offers a lot of flexibility in designing a crisp and clean dashboard. The touch function can be disabled (or enabled) via a recessed button on the back to prevent unauthorised use.   Simple mounting and configuration The Ekrano GX is optimised for flush panel or blind hole mounting and has all necessary mounting material supplied. Screw-on terminal blocks keep everything securely in place.    Outsmart any power challenge The Ekrano GX serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or  Offrgrid & Backup, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess (solar) power to selfconsumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly. But that’s just to name a few...

Read more less

The EM24 is for 3 phase monitoring only. To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX. The Energy Meter can be used as a: Grid meter, and used as control input for an ESS System. Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL200200100 GTIN 8719076051268 Warranty 5 Years

Read more less

The EM24 is for 3 phase monitoring only.   To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX.   The Energy Meter can be used as a:   Grid meter, and used as control input for an ESS System.   Measure the output of a PV Inverter   Measure the output of a AC Genset     The meter is connected to the Color Control GX. There are two options in its wiring:   Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable.   Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL200100000 Warranty 5 Years

Read more less

  The Energy Meter can be used to: Grid meter, and used as control input for an ESS System (1). Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee

Read more less

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal. The Energy Meter can be used for four things: Grid meter, and used as control input for an ESS System (1). Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL300100000 Warranty 5 Years

Read more less

The Energy Meter can be used to: Grid meter, and used as control input for an ESS System (1). Measure the output of a PV Inverter Measure the output of a AC Genset The meter is connected to the Color Control GX. There are two options in its wiring: Direct connection, either using the RS485 to USB interface with 1.8m cable length, or the 5.0m cable. Wireless connection via Zigbee Brand Victron Energy Manufacturer Part Number REL300300000 Warranty 5 Years

Read more less

It incorporates 4.3-inch LCD touch screen for monitoring and control.   Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.    GTIN 8719076051305 Input Voltage Range 170 – 265V AC Rated Charge Current 32A / phase Nominal Power 22kW Current Output Range 6 – 32A Data Communication Modbus TCP over WIFI Protection Category IP44 Dimensions H390 x W300 x D150mm Weight 3Kg Warranty 5 Years  

Read more less

The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN. The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system. It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.   Features WiFi Communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point or Station mode for both, the initial setup and monitoring. Easy operation and control via Bluetooth and the VictronConnect App Get full control and overview of all operating parameters and session statistics at a glance. Light Ring for fast viewing the device state Fully programmable RGB Light Ring around the charging port to quickly determine the device state. It can be programmed from the integrated web interface to display different light effects based on the current state (disconnected, charging, charged etc.). Three working modes available: 1. Manual Mode to configure output current Manual mode allows configurable output current between 6-32 A. The charging power can be regulated in different ways: by using the web interface, from a GX device and VRM and via VictronConnect. It allows to manually start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic Mode to ensure maximum PV system efficiency Detects when excess power is available and uses only that power to charge the vehicle. 3. Scheduled Mode to charge the EV at certain time intervals A fully programmable scheduler allows charging at different time intervals, for example at certain times during the night when grid energy is cheaper. Integration with GX devices and VRM Control and monitor the EV Charging Station NS from a GX device touch display and the Remote Console and the VRM Portal. The VRM Portal also offers real time and custom reports for configurable time periods.

Read more less

Open transition transfer The Filax is an open transition (break before make) transfer switch. The maximum load transfer time is 16ms. The load is normally supplied by the priority source, and is transferred to the alternate source if: The voltage of the priority source drops below the threshold value. The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value. Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000110 Maximum Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years

Read more less

Open transition transfer The Filax is an open transition (break before make) transfer switch. The maximum load transfer time is 16ms. The load is normally supplied by the priority source, and is transferred to the alternate source if: The voltage of the priority source drops below the threshold value. The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value. Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000000 Maximum Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number CIP142400000 Appr. Voltage Drop 125 mV Cold Resistance 0.3 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number CIP050060000 Warranty 5 Years    

Read more less

  Brand Victron Energy Manufacturer Part Number CIP106100000 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number CIP000100001 Warranty 5 Years    

Read more less

Brand Victron Energy Manufacturer Part Number CIP000050001 Warranty 5 Years

Read more less

The isolator is installed directly behind your boat’s 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit. Brand Victron Energy Manufacturer Part Number GDI000016000 Peak Current (20 ms) 1600 A Maximum Current 16 A Connection M6 IP Rating IP67 Dimensions H60 x W120 x D200mm Weight (kg) 1 Warranty 5 Years

Read more less

The isolator is installed directly behind your boat’s 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit. Brand Victron Energy Manufacturer Part Number GDI000032000 Peak Current (20 ms) 3200 A Maximum Current 32 A Connection M6 IP Rating IP67 Dimensions H63 x W164 x D200mm Weight (kg) 2 Warranty 5 Years

Read more less

When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc. The isolator is installed directly behind your boat’s 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit. Brand Victron Energy Manufacturer Part Number GDI000064000 Peak Current (20 ms) 6000 A Maximum Current 64 A Connection M6 IP Rating IP67 Dimensions H63 x W164 x D335mm Weight (kg) 3.2 Warranty 5 Years

Read more less

Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life.   Sealed (VRLA) GEL Batteries Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life and better cycle capacity than AGM batteries.   Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.   Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.   Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.  All Prices Include VAT Click Here For Spec Sheet Brand Victron Energy Manufacturer Part Number BAT412121104 GTIN 8719076037026 Voltage 12V Battery Capacity (C20) 130Ah Capacity (C20) 130 Cold Cranking 500CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L410 x W176 x H227mm Weight 38Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology Gel Battery Application Dual Purpose      

Read more less

Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life.   Sealed (VRLA) GEL Batteries Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life and better cycle capacity than AGM batteries.   Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.   Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.   Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412126101 Voltage 12 Capacity (C20) 265 Cold Cranking (EN) 650 Terminal Type M8 Terminal Layout LH+ Dimensions (Including Terminals) L520 x W268 x H223mm Weight (kg) 75 Warranty 2 Years Battery Technology Gel Battery Application Deep Cycle

Read more less

All Batteries are Made By Leading Manufacturers The GEL model range offers best deep cycle durability and overall longer life. The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge. Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals. The batteries are compliant with both CE and UL specifications in ABS fireproof containers and come with Victron’s 2 year world-wide warranty. VRLA GEL: design life 12 years   Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life.   Sealed (VRLA) GEL Batteries Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life and better cycle capacity than AGM batteries.   Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.   Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.   Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.  All Prices Include VAT Click Here For Spec Sheet Brand Victron Energy Manufacturer Part Number BAT412600104 GTIN 8719076037163 Voltage 12V Battery Capacity (C20) 66Ah Cold Cranking 270CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L258 x W166 x H235mm Weight 24Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology Gel Battery Application Dual Purpose      

Read more less

Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life.   Sealed (VRLA) GEL Batteries Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life and better cycle capacity than AGM batteries.   Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.   Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.   Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter.   Brand Victron Energy Manufacturer Part Number BAT412800104 Voltage 12 Capacity (C20) 90 Cold Cranking (EN) 360 Terminal Type M8 Terminal Layout LH+ Dimensions (Including Terminals) L350 x W167 x H183mm Weight (kg) 26 Warranty 2 Years Battery Technology Gel Battery Application Deep Cycle

Read more less

Features Global connectivity with 4G LTE-M LTE-M is the abbreviation for LTE Cat-M1 or Long Term Evolution (4G), category M1. This cellular technology is designed to connect Internet of Things devices to existing 4G towers while using low energy. LTE-M does support handovers and roaming so it is possible to use this device in a moving vehicle like a campervan. Check https://1nce.com/en/coverage/ to see if LTE-M is officially confirmed to be available in your area. Coverage is increasing every week as local providers roll out support. Your purchase includes 5 years of connectivity, so there is no need to worry about purchasing a separate data bundle and SIM-card. Easy system monitoring & control Your GlobalLink 520 comes with two VE.Direct ports which allows you to connect up to two VE.Direct devices such as a BMV Battery Monitor and/or a MPPT Solar Charge Controller directly to VRM. With two digital inputs that also act as pulse counters and a remote controllable relay, it’s a perfect solution to monitor and control your installation. Antenna built in The GlobalLink 520 comes with a built-in antenna that is designed to work all around the globe. However if you require better reception or want to install your module in a utility van for example, it is also possible to mount an external antenna. Victron Remote Management The online Victron Remote Management (VRM) portal provides you with access to your installation, from anywhere, at any time. In VRM you can check the status of your connected products, view detailed history graphs of your energy, generate detailed analytical reports, and even configure automatic alarms in case something goes wrong. Brand Victron Energy Manufacturer Part Number ASS030543020 GTIN 8719076053644 Warranty 5 Years

Read more less

  It includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal.  Note that many telecom operators are in the process of shutting down their 3G networks. Make sure to consider the replacement product, the GX LTE 4G, as well. Brand Victron Energy Manufacturer Part Number GSM100200100 GTIN 8719076051534 Input Voltage Range 8-70VDC Antenna Connector Type SMA Female Dimensions L106 × W42.5 × H22mm Warranty 5 Years

Read more less

  There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area. It requires a SIM card of the Mini-SIM format; and connects to the GX device with an included 1 meter USB cable. The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal. Brand Victron Energy Manufacturer Part Number GSM100100400 GTIN 8719076052937 Voltage Range 8-70VDC Antenna Connector Type SMA Female SIM Card Regular Mini SIM Dimensions L106 × W42.5 × H22mm Warranty 5 Years

Read more less

Tank levels can be read-out locally in the system. The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires required. Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is a power in terminal together with fused outputs to facilitate that. Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example 0 to 5 V. To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds. Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range. For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.

Read more less

 The GX Touch 50 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way Brand Victron Energy Manufacturer Part Number BPP900460050 GTIN 8719076053668 Warranty 5 Years

Read more less

Key Features  1. Sleek, Modern Aesthetic  Achieve a clean, contemporary aesthetic with the new GX Touch Flush Mount versions. These updated versions of the GX Touch displays seamlessly integrate into the wall, offering a sleek and streamlined appearance.  2. Versatile Mounting Options  The GX Touch 50 Flush Mount come with two different mounting options to suit various installation needs:  Sealed Mount  A rubber seal is applied to a double-sided tape on the screen, and the GX Touch screen is installed using brackets and rods. This method ensures a secure and stable mount, preventing water from getting behind the screen while also allowing for easy removal if needed. This method can only be used on flat and clean surfaces with rear access.  Glued Mount  For installations where rear access to the mounting surface is not available, the screen can be glued in place using double-sided tape. This method is straightforward and effective for achieving a flush mount without the need for additional hardware.  Durability  With an IP65 rating, the GX Touch 50 Flush is perfect for a variety of environments, including marine applications. Whether you’re installing on a yacht or an overlander, these models offer the durability and protection needed to withstand humidity and water sprays. The seal ensures no water gets behind the mounting panel, keeping the IP65-rated screen dry regardless of the mounting method.  Companions  The GX Touch is a companion to the Cerbo GX. This communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch, an MFD or our VictronConnect App thanks to its built-in WiFi Access Point. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

Read more less

Brand Victron Energy Manufacturer Part Number BPP900465050 GTIN 8719076054078 Dimensions L128.1 x W87 x D24.4mm Warranty 5 Years

Read more less

Simply mounted The GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard.  The GX Touch 50 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way Brand Victron Energy Manufacturer Part Number BPP900455050 Warranty 5 Years

Read more less

Key Features  1. Sleek, Modern Aesthetic  Achieve a clean, contemporary aesthetic with the new GX Touch Flush Mount versions. These updated versions of the GX Touch displays seamlessly integrate into the wall, offering a sleek and streamlined appearance.  2. Versatile Mounting Options  The GX Touch 70 Flush Mount come with two different mounting options to suit various installation needs:  Sealed Mount  A rubber seal is applied to a double-sided tape on the screen, and the GX Touch screen is installed using brackets and rods. This method ensures a secure and stable mount, preventing water from getting behind the screen while also allowing for easy removal if needed. This method can only be used on flat and clean surfaces with rear access.  Glued Mount  For installations where rear access to the mounting surface is not available, the screen can be glued in place using double-sided tape. This method is straightforward and effective for achieving a flush mount without the need for additional hardware.  Durability  With an IP65 rating, the GX Touch 70 Flush is perfect for a variety of environments, including marine applications. Whether you’re installing on a yacht or an overlander, these models offer the durability and protection needed to withstand humidity and water sprays. The seal ensures no water gets behind the mounting panel, keeping the IP65-rated screen dry regardless of the mounting method.  Companions  The GX Touch is a companion to the Cerbo GX. This communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch, an MFD or our VictronConnect App thanks to its built-in WiFi Access Point. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.  

Read more less