Low Voltage Batteries

Part No: PYLON-US5000-1C Storage Systems - Li-ion Battery Pack Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 if registered online, using the link below. Long cycle life and superior performance Compatible with tier 1 inverter brands To get the full 10 year warranty (3 years extra) you have to register here: http://en.pylontech.com.cn/service/support.   Supplier Part No: US5000 1C Weight: 40.4 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W  

Read more less

Cable Pack For The Pylon US2000/3000/5000 Each battery includes connection cables, these cables should be used for connection to the charger. One cable pack per system to a max of 5 2 x 2m long power cables 1 x 3.5m RJ45 Communication cable (Not for CAN communication)  

Read more less

Pylon US3000C LiFePo4 Battery 3.5kWh for Solar Product Features: Modular design for ease of expansion. 95% Depth of Discharge (DoD). Usable capacity 3374Wh. Parallel capability of up to 16 units. Intelligent BMS protecting battery cells. 6000 Cycles. RS485 and CAN compatible. Comes with 7-year standard warranty which is extendable to 10-years upon registration. Installation flexibility (Rack mount or Wall-mount). You can register the Pylon US3000C for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page.  The US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. Powerland will not be held liable for any product malfunctions as a result of incorrectly installed systems.

Read more less

Details With a sleek, smart design, this solar battery is built for both elegance and performance. Thanks to its IP65 ingress protection rating, it can be situated outside, and with a simple, modular format, you can easily expand capacity to gain more energy independence or as your needs change. Through the Duracell Energy smart app, you can manage all your renewable products and maximise your cost savings by integrating your solar power system, battery storage and EV chargers, as well as your time-of-use energy tariffs. Key features: High-performing solar storage battery For installing inside or outside your home Add additional batteries at any time to create a modular system of up to 32 units Duracell Energy smart app to manage your home energy system and maximise your cost savings Ready to plug and play with all cables included 1C/1C charge and discharge Master BMS autoselect Ingress protection rating: IP65 Battery module energy: 5.12kWh Useable energy: 4.6kWh Max output power: 100A Dimensions: 490mm (W) x 90mm (D) x 675mm (H) Weight: 45kg 10-year warranty

Read more less

The Libbi battery top cover acts as a cosmetic piece when installing a 15/20kW system. With the batteries sitting in two banks of two, the set without the inverter on top would have handles visibly showing on the top. The top cover covers these handles.

Read more less

Part No: BRACK-US2000 Storage Systems - Accessory Supplier Part No: WJ0ZU2000B01 Weight: 2.36 kg  

Read more less

Details Ideal for new and existing solar panel installations, the EP Cube from renowned manufacturer Canadian Solar offers excellent flexibility and intelligent software management. This 5kWh solar battery is designed to work with the 7.6kW hybrid inverter. Its modular setup makes it easy to transport and install, and gives you the flexibility to scale up your battery storage when you need to. With over-the-air upgrades, its firmware is always up-to-date, while the mobile app offers real-time monitoring and management. Key features: Flexible and intelligent solar battery module Compatible with the EP Cube hybrid inverter Made with LiFEPO4 cell technology Automated power supply in case of grid outage Compatible with new and existing PV systems Easy to manage with an LED display and mobile app Real-time monitoring generation, storage and consumption of electricity Automatic weather alerts to manage storage capacity Over-the-air firmware updates Integrated protection against overcurrent, short circuit anti-islanding and many more Compatible with EV chargers up to 7.4kW Ingress protection: IP67 (once stacked together) Depth of discharge: 100% Dimensions: 600mm (W) x 266mm (H) x 200mm (D) Weight: 42kg 10-year warranty

Read more less

Part No: BRACK-US3000 Storage Systems - Accessory Supplier Part No: BW0PLUSUS3KAZJ01 Weight: 2.7 kg

Read more less

Details Ensure your Canadian Solar EP Cube battery is stable and secure with this battery base. Key features: Battery base for standing on the floor Designed for use with the EP Cube inverter and battery Easy to install

Read more less

Details Ideal for new and existing solar panel installations, the EP Cube from renowned manufacturer Canadian Solar offers excellent flexibility and intelligent software management. This 7.6kW single-phase hybrid inverter is designed to work with a modular battery which delivers 5kWh of solar battery storage. Its modular setup makes it easy to transport and install, and gives you the flexibility to scale up your battery storage when you need to. With over-the-air upgrades, its firmware is always up-to-date, while the mobile app offers real-time monitoring and management. Key features: Flexible and intelligent hybrid inverter Compatible with the EP Cube modular battery Two MPPTs each with one string Allows up to 16A DC PV input per MPPT Automated power supply in case of grid outage Compatible with new and existing PV systems Easy to manage with an LED display and mobile app Real-time monitoring generation, storage and consumption of electricity Automatic weather alerts to manage storage capacity Over-the-air firmware updates Integrated protection against overcurrent, short circuit anti-islanding and many more Compatible with EV chargers up to 7.4kW Ingress protection: IP67 (once stacked together) Weight: 40kg 10-year warranty

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 2 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 10kWh Cable Expansion Kit Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: DY-POWERBOXG2 Storage Systems - Li-ion Battery Pack Dyness Powerbox G2 The Powerbox G2 is a low-voltage battery designed for residential energy storage scenarios, supporting up to 50 parallel units, 10.24-512kWh energy coverage. With 6.5in slim design, there is no limit to the installation space. IC discharge, providing strong power for household electricity consumption. Flexible Expansion - Up to 50 parallel units, 10.24-512kWh capacity. Automatic Self-Heating - Charges at -20℃, operates -20°C to 55°C  Ultra Safe - Smart Fire Suppression, 5-sec Response, Auto Pressure Relief IP65 Protection - Fearless of outdoor installation, strong environmental adaptability Long-term reliability - LFP cells, ultimate cycles,10 years warranty   Supplier Part No: Power Box G2 Weight: 98 kg Battery Type: Lithium Ion Nominal Energy: 10240 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5120 W Maximum Discharge Rate (5 Minutes): 10240 W Surge Discharge Rate (15 Seconds): 10240 W Maximum Charge Rate (5 Minutes): 5120 W

Read more less

Key Features:Fully AssembledA fully assembled Fogstar/Seplos kit. No DIY required!Scalable & FlexibleConnect up to 16 units together, up to 257.6 kWhReliable Performance6 Year manufacturers warranty with 10 years of customer supportLong Lifespan8000 cycles at 80% Depth of Discharge (DOD)Seamless IntegrationCompatible with popular inverter protocols such as Victron, Pylontech, Growatt, Sofar, Solis, and GoodweSmart ConnectivityCAN & RS485 communication for smooth system integrationUser-Friendly InterfaceIntuitive LCD touchscreen for real-time monitoringExpert Cell ManagementSeplos BMS and 2A JK Active BalancerAffordable Storage Solution£108.89 per kWh Product Specifications:Rated Energy: 16.1kWhCell Assembly: 1P16SNominal Voltage (V): 51.2VOperating Voltage (V): 42V - 58.2VCycle Life: 8000 Cycles (at 25°C 50A charge and discharge current) at 80% DOD.Working Temperature: 0 - 40°C Charge. -20°C - 40°C Discharge.Rated Charge/Discharge Current (A): 100A/200A @25±2℃Maximum Discharge Current: 200ACapacity: 314AhActive Balancer: JK 2AWeight: 119.5kg ± 3kgNominal Voltage: 51.2VSize: 898.5(H) x 415(L) x 260(W)Pre-loaded Inverter Protocols: Victron, Sofar, Pylontech, Growatt, Solis, Goodwe. What's Included?1.5m Communication CablePositive and Negative Cables

Read more less

Part No: DY-POWERDEPOTH5B-G2 Storage Systems - Li-ion Battery Pack Dyness - PowerDepot H5B 5.12kWh G2 PowerDepot H5B is a low-voltage product designed for residential application. The reliable lithium iron phosphate (LFP) technology ensures maximum safety and longer cycle life. It can be used flexibly for self-consumption and backup applications with a wide capacity range scalable from 5.12kWh to 25.6 kWh, to meet various energy storage needs. APP Monitoring - Real-time monitoring & Remote upgrade available High Protection Level - Indoor & outdoor options Various Mounting Methods - Wall-mounted or floor-standing installations Wide Compatibility - Matching with leading inverters Temperature protection - Heating and Cooling function Voltage/Current Protection IP65

Read more less

Pylontech FIDUS PRO 5.12 LV Battery Module Expandable modular design, up to 120*5.12kWh Compatible with Solis low voltage hybrid/AC inverters (see attached document) IP65 with heat film inside for winter operation Operates from -20°C to 55°C with C5-M corrosion protection High energy density cells makes for lightweight but high capacity batteries Smaller footprint and indoor/outdoor compatible to save your valuable space Secured by self-developed cells, modules and BMS Dual active protection mechanism enhances safety significantly Designed for 10+ years or >6000 charging cycle Remote monitoring of the battery system via a plug-in wifi module (supplied with the separate WiFi installation kit, not with the battery itself)

Read more less

Part No: PYL-L2-BATT Storage Systems - Li-ion Battery Pack The Force L2 is another addition to the HESS(home energy storage system) from Pylontech. Inherit with Pylontech's modular design concept, combined with easy installation, simple connectors and outdoor compatibility it is the ideal storage solution that blends in with a home feeling or small commercial environment. The stacking system provides flexibles configurations from 7.1kWh to 14.21kWh capacity. In other words, 2 to 4 modules can be used per system and the base PYL-L2-BMU-BASE is required.  Flexible Module Design Reliable Performance Quick connector to save installation time 90% DoD with more usable capacity IP 55 class protection Important Please ensure that you check the inverter settings are below the maximum allowed voltage BEFORE plugging in the UTILITY/SOLAR to the inverter. Supplier Part No: FL4874MA02V00101 Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 3550 Wh Depth of discharge: 90.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 1776 W Maximum Discharge Rate (5 Minutes): 1776 W Surge Discharge Rate (15 Seconds): 1776 W Maximum Charge Rate (5 Minutes): 1776 W

Read more less

Details ONLY AVAILABLE FOR PURCHASE WITH DURACELL INVERTER This 16kWh battery system utilises the safest and highest performing chemistry; Lithium iron phosphate.  The Dura16 LV battery boasts 8000 cycles and can charge/discharge at 130A. Designed and engineered in the UK. With a sleek, smart design, this solar battery is built for both elegance and performance. Thanks to its IP65 ingress protection rating, it can be situated outside, and with a simple, modular format, you can easily expand capacity to gain more energy independence or as your needs change. Through the Duracell Energy smart app, you can manage all your renewable products and maximise your cost savings by integrating your solar power system, battery storage and EV chargers, as well as your time-of-use energy tariffs. Key features: High-performing solar storage battery For installing inside or outside your home Add additional batteries at any time to create a modular system of up to 16 units Duracell Energy smart app to manage your home energy system and maximise your cost savings Ready to plug and play with all cables included 1C/1C charge and discharge Master BMS autoselect Ingress protection rating: IP65 Battery module energy: 16kWh Useable energy: 14.4kWh Max output power: 130A Weight: 122kg 10-year warranty 8000 Cycles

Read more less

This Kit Includes: 1 x 3.68kW Libbi Inverter 1 x 5kWh Libbi Home Battery 1 x Libbi Cable Expansion Kit for 5kWh 1 x Myenergi Controller Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 1 x 5kWh Libbi Home Battery 1 x Libbi Cable Expansion Kit for 5kWh 1 x Myenergi Controller Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM20-12 Voltage 12 Volts Technology AGM Capacity (C20) 20 Ah Charge Rate 2 A Length 181 mm Width 77 mm Height inc. terms 167 mm Weight 5.8 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043804367

Read more less

This Kit Includes: 1 x 5kW Libbi Inverter 4 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 20kWh Battery Kit  Optional extra Floor Stand Optional extra top cover myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

The Fogstar Energy IP65-Rated 16.1kWh Battery, meticulously engineered for UK conditions, delivers a robust combination of advanced LiFePO4 battery technology, integrated safety systems, and long-term durability. Designed for both indoor and outdoor installation, the Fogstar Energy IP65-Rated 16.1kWh Battery provides reliable performance in demanding environments. Its fully sealed construction, intelligent thermal management, and wide inverter compatibility make it a dependable solution for long-term energy storage. This 16.1kWh solar battery boasts numerous advanced features, including: Built-In Fire Suppression & IP65 ProtectionThe battery is housed in a fully sealed IP65-rated enclosure, protecting internal components against dust ingress and water jets from any direction. An automatic, built-in aerosol fire suppression system activates if internal temperatures reach critical levels, helping to suppress fire at the source with zero maintenance required.Intelligent Heating SystemThe integrated heating system automatically activates when temperatures drop below 5°C, enabling safe charging at 0°C and reliable operation in ambient temperatures as low as -20°C.Plug-and-Play Inverter CompatibilityThe PACE Battery Management System (BMS) contains pre-loaded inverter protocols for Victron, Pylontech, Growatt, Sofar, Solis, and Goodwe. Inverter protocol selection can be changed directly via the LCD touchscreen without the need for software downloads.Premium Grade A EVE CellsThe Fogstar Energy IP65-Rated 16.1kWh Battery utilises 16 MB31 Grade A EVE LiFePO4 cells, delivering an exceptional cycle life of up to 8,000 cycles at 80% DOD (95% DOD as of February 2026).Active BalancingEquipped with a 2A JK Active Balancer to ensure consistent cell balancing and improved long-term performance.Scalable Energy Storage: Up to 15 batteries can be connected in parallel, allowing total system capacity to be expanded as energy requirements grow.Enhanced Safety with DC Breaker: Each battery includes an integrated 250A DC breaker, providing critical protection by safely interrupting current in the event of a fault.Intuitive Touchscreen Interface: The 4.3-inch TFT LCD touchscreen provides a clear and user-friendly interface for monitoring system status and selecting inverter protocols.Energy-Efficient Sleep Mode: When not in use, the touchscreen automatically enters sleep mode to conserve energy, while allowing instant access to system information with a simple touch.Wheels for Portability: Despite its robust construction, integrated wheels make the battery significantly easier to manoeuvre during installation or maintenance.Simplified Installation: All batteries are supplied with M8 ring terminals and protective covers for straightforward and secure installation. Fogstar Energy supports this battery with a 10-year warranty, reflecting confidence in its design, construction, and long-term reliability. SPECIFICATIONS Manufacturer: Fogstar EnergyModel: FE48-16Total Energy: 16,076.8WhCell Type: EVE MB31 Grade ACell Assembly: 16S1PCycle Life: 8,000 cycles at 80% DOD (95% DOD as of February 2026).BMS: PACE 200AMaximum Discharge Current: 200ABalancer: 2A JK Active BalancerCapacity: 314AhWeight: 128.8kgDimensions: 500mm(L) × 232mm(W) × 915mm(H)Nominal Voltage: 51.2VPre-loaded Inverter Protocols: Victron, Luxpower, Sunsynk, Solis and more.

Read more less

Volts – 12.8, Ah – 100, Cycle Life @60% DOD – 5,000, Weight 11KG, Dimensions LxWxH – 260mm x 172mm x 214mm Key Features: Extended Lifespan: Predator Lithium Life Batteries provide over 3,500 cycles at 80% depth of discharge, significantly outlasting conventional lead-acid batteries. Lightweight Design: These batteries are approximately one-third the weight of lead-acid counterparts, facilitating easier handling and installation. Rapid Recharge: They can be charged at rates up to 100A, allowing for quicker recharging compared to traditional batteries. Integrated Battery Management System (BMS): Each battery includes a BMS to ensure safe operation by monitoring voltage, temperature, and state of charge.

Read more less

Details Inverter -  Ideal for new and existing solar panel installations, the EP Cube from renowned manufacturer Canadian Solar offers excellent flexibility and intelligent software management. This 7.6kW single-phase hybrid inverter is designed to work with a modular battery which delivers 5kWh of solar battery storage. Its modular setup makes it easy to transport and install, and gives you the flexibility to scale up your battery storage when you need to. With over-the-air upgrades, its firmware is always up-to-date, while the mobile app offers real-time monitoring and management. Key features: Flexible and intelligent hybrid inverter Compatible with the EP Cube modular battery Two MPPTs each with one string Allows up to 16A DC PV input per MPPT Automated power supply in case of grid outage Compatible with new and existing PV systems Easy to manage with an LED display and mobile app Real-time monitoring generation, storage and consumption of electricity Automatic weather alerts to manage storage capacity Over-the-air firmware updates Integrated protection against overcurrent, short circuit anti-islanding and many more Compatible with EV chargers up to 7.4kW Ingress protection: IP67 (once stacked together) Weight: 40kg 10-year warranty   Battery - Ideal for new and existing solar panel installations, the EP Cube from renowned manufacturer Canadian Solar offers excellent flexibility and intelligent software management. This 5kWh solar battery is designed to work with the 7.6kW hybrid inverter. Its modular setup makes it easy to transport and install, and gives you the flexibility to scale up your battery storage when you need to. With over-the-air upgrades, its firmware is always up-to-date, while the mobile app offers real-time monitoring and management. Key features: Flexible and intelligent solar battery module Compatible with the EP Cube hybrid inverter Made with LiFEPO4 cell technology Automated power supply in case of grid outage Compatible with new and existing PV systems Easy to manage with an LED display and mobile app Real-time monitoring generation, storage and consumption of electricity Automatic weather alerts to manage storage capacity Over-the-air firmware updates Integrated protection against overcurrent, short circuit anti-islanding and many more Compatible with EV chargers up to 7.4kW Ingress protection: IP67 (once stacked together) Depth of discharge: 100% Dimensions: 600mm (W) x 266mm (H) x 200mm (D) Weight: 42kg 10-year warranty  

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended Shelf Life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets international standards JIS C8702, BS6290-4 & IEC60896-21/39 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM120-12 Voltage 12 Volts Technology AGM Capacity (C20) 120 Ah Charge Rate 12 A Length 328 mm Width 172 mm Height inc. terms 222 mm Weight 32.5 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043803148

Read more less

This Kit Includes: 1 x 3.68kW Libbi Inverter 2 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 10kWh Cable Expansion Kit Optional extra Floor Stand myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

This Kit Includes: 1 x 3.68kW Libbi Inverter 3 x 5kWh Libbi Home Battery 1 x Myenergi Controller 1 x 15kWh Battery Connection Kit Optional extra Floor Stand Optional extra top cover myenergi created libbi to store your self-generated energy, to use when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with all other myenergi devices. libbi is modular by design. Each module can store up to 5kWh of electricity so, combining 4 of them together would provide up to 20kWh of storage.   myenergi Ecosystem - Integrate with your myenergi devices, prioritising stored electricity to power your home, eddi or zappi. Modular Storage By Design - Each battery module stores 5kWh of electricity. Combining four together provides up to 20kWh of storage. Ultimate Control - Choose whether you want to charge your libbi from solar, grid or a mixture of both. When charging from grid libbi optimises around your time of use or dynamic tariff. Flexible Install - libbi works as both an AC and DC coupled battery system with solar PV. Connect PV without the need for a separate inverter or retrofit to any existing PV system. Remote Access - myenergi app allows you to access and control your libbi from anywhere in the world. Live displays allow you to monitor your imported and exported electricity, all in one place. Optional Blackout Back Up - Instant energy availability to a dedicated socket or lighting circuit in the event of a power cut

Read more less

Part No: PYL-L2-BMU-BASE Storage Systems - Battery Base External BMU for the Force L2 Batteries. Each BMU can take 2 to 4 Force L2 batteries and it is required for comunication between the batteries for all Force L2 system. Supplier Part No: FC0048MA02V00101 Weight: 17.5 kg

Read more less

Key Features: 48V Output: Perfectly suited for charging 48V LiFePO4 battery systems. 35A Current: Delivers a powerful charge to get your batteries back up and running quickly. Compatible: Ideal for using with all 48V batteries. User-Friendly: Designed for ease of use with clear operation and status indicators. Extensive Protections: Built-in safeguards against over-voltage, over-current, short circuits, and reverse polarity for safe and reliable charging. 2-Year Warranty: Backed by a comprehensive 2-Year Manufacturers Warranty   PRODUCT SPECIFICATIONSWorking Temperature     -30°c ~ +40°cStorage Temperature       -40°c ~ +70°cRelative Humidity            5% ~ 95%Heat Dissipation Mode    Fan CoolingInput Voltage                   180-260 VACInput Frequency               50Hz / 60 HzChemistry                          LiFePO4DC Output                         48V / 35ARing connector size          M10 (will fit M6 using a washer) HOW TO CONNECT YOUR CHARGER Remove your charger from the packaging Retain your packaging Ensure the charger air vents are not blocked before connecting Connect the black (negative -) cable to the black (negative -) terminal on the battery Connect the red (positive +) cable to the red (positive +) terminal on the battery Ensure terminal rings are tightened Plug your battery charger into the mains and switch ON Your battery indicator light should be flashing green (pre-charge inspection stage). HEALTH AND SAFETY Do not disassemble the charger Do not leave charger on unattended Do not remove the charger cover Do not block the charger air vent Keep away from heat source Keep away from water Do not crush, incinerate or modify Only use within manufacturers specifications.

Read more less

Volts – 12.8, Ah – 100, Cycle Life @60% DOD – 5,000, Weight 11KG, Dimensions LxWxH – 260mm x 172mm x 214mm The Predator 12V 100Ah 12.8V Bluetooth & Heating (BH) Lithium offers a great alternative to lead acid batteries. With it’s built in bluetooth and heat plates, this battery can be monitored from your smartphone/tablet and whilst all lithium batteries can be discharged in sub 0’C temperatures, with built in heat plates, you can also charge this battery safely without fear that the inbuilt BMS will turn the battery off due to the cold. With 100% capacity usage, lighter weight and faster recharge, Lithium batteries are quickly becoming the go to technology for battery replacement. Built with Prismatic cell technology, these lithium premium batteries, have a high grade integrated BMS (Battery Management System) for added protection and safety. The Predator Lithium Battery with 100Ah is a great mid range level Lithium battery for use in many applications. With competitive prices, the Predator Lithium BH and XBH range are now becoming a real alternative to older style battery technology. Battery Technology: Lithium Voltage: 12.8V Capacity (AH): 100ah Life Cycles: 5000 Watts: 1280W Warranty: 5 years Weight:11 kg Dimensions:260 × 172 × 214 cm

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM5-12 Voltage 12 Volts Technology AGM Capacity (C20) 5 Ah Charge Rate 0.5 A Length 90 mm Width 70 mm Height inc. terms 107 mm Weight 1.8 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043803001

Read more less

The Fogstar Energy 16.1kWh Battery, meticulously engineered for UK conditions, provides an unparalleled combination of cutting-edge technology and exceptional durability. This 16.1kWh solar battery boasts numerous advanced features, including: Intelligent Heating System: Our batteries automatically activate their heating function when temperatures drop below 5°C, ensuring optimal performance even in frigid environments of -20°C.Plug-and-Play Inverter Compatibility: The PACE Battery Management System (BMS) seamlessly integrates with a wide range of popular inverters, containing pre-loaded protocols for Victron, Pylontech, Growatt, Sofar, Solis, and Goodwe. Changing the inverter protocol doesn't involve any complex software downloads; you can change it simply by navigating the LCD Touchscreen.Unwavering Confidence in Quality: We stand behind the exceptional design and construction of our batteries, offering an industry-leading 10-year warranty and a 15-year shelf-life. Intuitive Touchscreen Interface: The 4.3-inch TFT LCD touchscreen provides a user-friendly interface for monitoring system status and adjusting inverter protocols.Energy-Efficient Sleep Mode: When not in use, the touchscreen automatically enters sleep mode, conserving precious energy while ensuring instant access to detailed system information upon activation - at the touch of the screen.Premium Grade A EVE Cells: The Fogstar Energy 16.1kWh Battery utilises 16 premium MB31 Grade A EVE LiFePO4 cells, renowned for their exceptional lifespan of 8,000 cycles at 80% DOD (95% DOD as of February 2026).Active Balancing: Contains a 2A JK Active Balancer to ensure seamless cell balancing during the charging process.Scalable Energy Storage: Up to 15 batteries can be connected in parallel to expand energy storage capacity to suit your specific needs.Enhanced Safety with DC Breaker: Each 16.1kWh battery is equipped with a 250A DC Breaker, safeguarding the system against potential faults by interrupting power flow and shutting off the electrical current in the event of critical issues.Wheels for Portability: The fact that the Fogstar Energy 16.1kWh Battery has wheels makes it extremely easy to move around, even with its 140kg weight. This is a significant advantage, especially for homeowners who may need to relocate the battery for maintenance or installation purposes.Wall Mounting Brackets: The battery also comes with optional wall mounting brackets, enabling you to free up valuable floor space, making the battery less intrusive and allowing for a more flexible room layout. Simplified Installation: All batteries contain M8 ring terminals and covers for simplicity of installation. With its innovative features, unwavering reliability, and commitment to quality, the Fogstar Energy 16kWh Battery stands as a testament to our dedication in providing homeowners with exceptional energy storage solutions. SPECIFICATIONS Manufacturer: Fogstar EnergyModel: FE48-16Total kWh: 16,076.8EVE Cell Model: MB31Cell Assembly: 16S1PCycle Life: 8,000 at 80% DOD (95% DOD as of February 2026).BMS: PACE 200A BMSMaximum Discharge: 200ABalancer: 2A JK Active BalancerCapacity: 314AhWeight: 140kgDimensions: 500(L) x 230(W) x 830(H)mmNominal Voltage: 51.2VPre-loaded Inverter Protocols: Victron, Sofar, Pylontech, Growatt, Solis, Goodwe.

Read more less

With 7,200Wh of usable energy, the 2nd Generation Drift PRO 24V 300Ah delivers serious off-grid performance for campervans, motorhomes, boats, and off-grid solar installations. What’s New in the Gen2? ✅ Integrated Active Balancing: Now built-in - no external balancer required. ✅ Battery-Linking: Dedicated Battery-Link ports allow multiple Drift PRO units to communicate over CANbus with a single Victron Cerbo GX (or GX-enabled inverter). ✅ Improved Internal Layout: Optimised for thermal management, cable routing, and long-term serviceability. Key Features: ✅ 7,200Wh Capacity: High energy storage for extended off-grid use. ✅ Grade A Cells: Built with trusted prismatic LiFePO₄ cells for long cycle life and consistent performance. ✅ 300A Smart BMS: Advanced protection against over-voltage, under-voltage, over-current, short circuit, and low-temperature charging. ✅ Victron Plug-and-Play Integration: Connect the CAN port on the master battery to the BMS-CAN port on your Victron Cerbo GX (or GX-enabled inverter) using the supplied cable. ✅ Multi-Battery Support: Additional Drift PRO batteries connect via the Battery-Link port, enabling full multi-battery CAN communication with Victron. ✅ 10-Year Warranty & UK-based Support: Long-term peace of mind with responsive, in-house customer service you can actually talk to. ✅ Cost per Ah: Outstanding value at just £4.33 per Amp hour, delivering premium performance at an unbeatable price. ✅ Fogstar App Monitoring: Real-time Bluetooth monitoring of SOC, cell voltages, temperatures, and cycle data. ✅ Low Temperature Charging Protection: Automatic internal heating system enables safe charging below 0°C. ✅ On/Off Switch: Enables hibernation mode for storage and transport. ✅ Serviceable Metal Case: Durable, field-serviceable design with M10 terminals. ✅ Lightweight: Just 60.6kg with built-in handles for easier transport and installation. ✅ UK Engineered: Designed and developed by Fogstar’s in-house team for real-world off-grid conditions. Quick Specifications: Nominal Capacity: 300AhNominal Voltage: 24VRecommended Charge Voltage: 28.8VMax Continuous Discharge: 300ACycle Life: 4,500 cycles at 80% depth of discharge (DOD)Charging Efficiency: Up to 98%Dimensions: 280 x 698 x 205 mmWeight: 60.6kgTerminals: M10Operating Temp: -20°C - 55°C

Read more less

  Backed by a dedicated UK-based support team, you'll have complete peace of mind wherever you roam. Designed & Supported in the UK: Expertly designed in the UK with a dedicated UK-based support team for complete peace of mind. Ultra-Long Lifespan: Enjoy an industry-leading 3500+ cycles at 80% depth of discharge, translating to a phenomenal 10-15 year lifespan. 10 Year Warranty: Backed by a comprehensive 10-year warranty. Cost per Ah: Exceptional value at just £2.86 per Amp hour, delivering premium performance at an unbeatable price. Premium Lithium Cells: Built with Grade A EVE LiFePO4 Lithium cells for exceptional stability, safety, and performance. IP67 Rated: Fully IP67 rated for dust and water resistance — built to withstand the toughest off-grid, marine, and outdoor environments. Advanced 100A BMS: High discharge 100A JBD Battery Management System ensures optimal power delivery and protects battery health. Bluetooth Monitoring: Monitor and manage your battery in real-time using the free Fogstar Drift App (Android & iOS). Built-in Heating: Integrated automatic heating system maintains peak performance even in cold environments. Lightweight & Compact: Weighing only 10Kg and featuring a compact size for flexible installation. Expandable Power: Connect up to 4 Drift batteries in series or parallel for increased capacity. Inverter Ready: Ideal for use with inverters up to 1000W, powering your essential appliances with ease. QUICK SPECS Energy 1280Wh Nominal Capacity 105Ah Nominal Voltage 12V Recommended Charge Voltage 14.4V Max Cont. Discharge 100A Dimensions 260mm L x 168mm W x 209mm H Weight 10Kg IP67 Rated The Fogstar Drift terminals are all M8 in size, 1.25 pitch, 12mm. All of our Drift Leisure batteries come with M8 bolts as standard. Connect up to four (4) Drift batteries in series for a maximum of 48V, or up to sixteen (16) in parallel to boost capacity (Ah) while maintaining the same voltage. Ideal for use with inverters up to 1000W.

Read more less

Volts – 12.6, AH – 160, Cycles – 1500, Weight – 41kg Dimensions – (LxWxH) 340mm x 173mm x 220mm Applications Marine, especially Off grid Canalboats, especially Live on Board RV and Leisure Electric Propulsion – boats and vehicles Home Energy Storage System Solar and Wind energy storage

Read more less

Key Features  110Ah Deep-Cycle Capacity Provides consistent, reliable power for running appliances, lighting, pumps, fridges, and on-board electronics during extended trips. Advanced AGM Technology Absorbent Glass Mat design ensures improved energy delivery, faster charging, and spill-proof operation. No topping up or maintenance required. Sealed, Vibration-Resistant Build – Constructed with a tough sealed casing ideal for mobile and marine environments—resistant to shock, vibration, and harsh conditions. Low Self-Discharge Retains charge for longer when not in use, making it ideal for seasonal vehicles or intermittent off-grid use. Reliable in All Conditions Performs well in both hot and cold environments, offering stable power year-round.   Perfect For:Caravans • Motorhomes • Campervans • Marine Use • Solar Setups • Off-Grid Systems • Inverters • Backup Power   Why Choose AGM?AGM batteries provide superior deep-cycle performance, excellent safety, and total peace of mind without the need for maintenance—making them the ideal choice for modern leisure and off-grid applications.

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM40-12 Voltage 12 Volts Technology AGM Capacity (C20) 40 Ah Charge Rate 4 A Length 198 mm Width 166 mm Height inc. terms 171 mm Weight 13.5 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043804398

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM12-12 Voltage 12 Volts Technology AGM Capacity (C20) 12 Ah Charge Rate 1 A Length 151 mm Width 98 mm Height inc. terms 101 mm Weight 3.6 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043804350

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM2.9-12 Voltage 12 Volts Technology AGM Capacity (C20) 2.9 Ah Charge Rate 0.2 A Length 80 mm Width 56 mm Height inc. terms 104 mm Weight 1.2 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043804329

Read more less

Features • Faster Recharge - Meaning less vehicle downtime • 500 cycles at 50% DOD - Extended service life, allowing you more power, more freedom, more fun • Absorbent glass material (AGM) separators & sealed construction prevents any acid spillage and provides added safety • Fit In Any Position - Sealed AGM construction means the batteries can be placed in any orientation to ensure the best possible fit • Recyclable Product - Environmentally friendly • Low Self Discharge - Extended shelf life • Tier 1 Manufacturing Partners - Products produced in accredited ISO9001 & ISO14001 certified facilities • Legally Compliant - Meets International Standards JIS C8702, BS6290-4 & IEC60896-21/22 Application Use • Emergency Lighting • Medical Equipment • Security Systems • Fire Alarms • Solar Power / Renewable Energy • Telecommunications • Emergency Service Vehicles • Marine & Leisure Vehicles • Golf Trolleys & Carts • Mobility Vehicles & Chairs • Navigational Control Systems • Powered Toys Terminals Brand Platinum Product Code PAGM12-6 Voltage 6 Volts Technology AGM Capacity (C20) 12 Ah Charge Rate 1 A Length 151 mm Width 50 mm Height inc. terms 101 mm Weight 1.8 Kg Cycles @ 50% DOD 500 Guarantee 1 Year Barcode (EAN) 5060043803100

Read more less

This Acrel single-phase energy meter is designed to measure and display electrical characteristics, including voltage, current and power. It's been configured for use specifically with the EP Cube solar inverter and battery system, while its compact and durable design makes it easy to install and use. Key features: Single-phase meter, configured for use with the EP Cube solar inverter and battery system Designed for mounting on a 35mm DIN rail RS485 interface Ingress protection: IP20 Dimensions: 90mm x 18mm x 65mm Weight: 80g

Read more less

Ensure your Canadian Solar EP Cube battery and inverter system is securely fixed to the wall with this wall mount kit. Key features: Kit for mounting to a wall Designed for use with the EP Cube inverter and battery Easy to install

Read more less

Part No: DY-DL5.0C-PRO Storage Systems - Li-ion Battery Pack Experience reliable energy storage with the Dyness DL5.0C Pro, a sleek and efficient lithium battery designed for domestic use. Perfect for powering your home with clean, consistent energy, it combines advanced technology with user-friendly design to keep your life running smoothly and sustainably. 5.12kWh capacity- up to 50 units in parallel 1C discharge 46 kg weight  95% DoD IP20   -20-50O C charge/discharge temp with heating function  44.7-57.6V Operating voltage  Please note the DL5.0C and DL5.0C Pro are not compatible together.    Supplier Part No: DL5.0C PRO Weight: 46 kg Battery Type: Lithium Ion Nominal Energy: 5120 Wh Depth of discharge: 90.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5632 W Maximum Discharge Rate (5 Minutes): 3840 W Surge Discharge Rate (15 Seconds): 5632 W Maximum Charge Rate (5 Minutes): 3840 W

Read more less

Predator Batteries 12.8V 314Ah LiFePO₄ Leisure Battery – M8 Terminals Power your adventures with confidence using the Predator Batteries 12.8V 314Ah LiFePO₄ Leisure Battery — a high-capacity, lightweight, and long-life energy solution built for serious leisure and off-grid applications. Designed with premium lithium iron phosphate (LiFePO₄) technology, this battery delivers exceptional performance, reliability, and safety where it matters most. With a massive 314Ah capacity, high 200A continuous discharge, and an impressive up to 4,000 cycle life, this battery is ideal for motorhomes, campervans, caravans, boats, solar storage systems, and off-grid setups. Despite its high capacity, it weighs just 25.7kg, offering significant weight savings compared to traditional lead-acid batteries. Backed by an industry-leading 8-year warranty, Predator Batteries gives you long-term peace of mind and dependable power for years to come. Key Features & Benefits High Capacity Performance – 314Ah for extended runtimes and reliable power delivery 12.8V LiFePO₄ Technology – Safer, more stable, and longer-lasting than conventional lithium batteries 200A Continuous Discharge – Supports high-draw appliances and inverters with ease Up to 4,000 Cycles – Exceptional longevity, reducing replacement costs over time Lightweight Design – Only 25.7kg, ideal for weight-sensitive applications M8 Terminals – Secure, robust connections for high-current setups Maintenance-Free – No topping up, no memory effect, no hassle 8-Year Warranty – Confidence and reliability you can trust Technical Specifications Battery Type: LiFePO₄ (Lithium Iron Phosphate) Nominal Voltage: 12.8V Capacity: 314Ah Continuous Discharge Current: 200A Cycle Life: Up to 4,000 cycles Weight: 25.7kg Terminal Type: M8 Dimensions (L × W × H): 370mm × 190mm × 245mm Warranty: 8 Years Ideal For Motorhomes • Campervans • Caravans • Marine Applications • Solar & Off-Grid Systems • Backup Power

Read more less

Safely and securely wall-mount your Fogstar Energy 15.5kWh or 16.1kWh battery with this robust, purpose-built bracket. Key Features: Durable Construction: Crafted from heavy-duty galvanised steel and finished in black for a sleek, professional look. Universal Fit: Designed to accommodate both the Fogstar Energy 15.5kWh and 16.1kWh battery models. Wall Mounting Made Easy (with important considerations below): This bracket allows for wall mounting, freeing up valuable floor space. Please read the important safety information below before installation. Important Safety Information: Professional Installation Recommended: Due to the battery's significant weight (140kg), professional installation by a qualified contractor or structural engineer is strongly advised. Wall Assessment is Crucial: The structural integrity of your wall is paramount. It must be capable of supporting the combined weight of the battery and bracket. Consult with a structural engineer or qualified builder to assess your wall type (drywall, concrete, brick, wood stud) and determine the appropriate fixings. Reinforcement of the wall structure, such as doubling up studs or adding support beams, may be necessary. Suitable Fixings Required: Use only fixings specifically designed for your wall type. Incorrect fixings could lead to serious damage or injury. Weight Considerations: 140kg is a substantial weight. Wall mounting may not be suitable for all wall types or locations. A thorough assessment is absolutely essential. Disclaimer: The seller assumes no responsibility for damage or injury caused by improper installation or insufficient wall strength. It is the buyer's sole responsibility to ensure the wall can safely support the battery and that the installation is carried out by a qualified professional. Package Includes: One (1) heavy-duty wall mount bracket (fixings not included as they will depend on your specific wall type).

Read more less

FeaturesDurable, galvanised steel constructionComes with all bolts and brackets495mm (W) x 190.5mm (D) including brackets BenefitsProvides a safe and secure storage solution for your server rack batteryFrees up space on your floor or workbenchEasy to installMade with high-quality materialsSimple InstallationAttach the mount to the wall using the included bolts and brackets.Place the server rack battery on the mount.Secure the battery to the mount using the included bolts and brackets.

Read more less

The Fogstar Energy 48V 16.1kWh ECO battery is a fully assembled, commercial-grade energy storage solution built for homes and small commercial installs, providing reliable performance, long cycle life, and seamless inverter integration. Our 2026 version steps things up with integrated fire suppression for enhanced safety and a built-in heating system that enables charging all the way down to -10°C. Cold garages, outbuildings, and winter installs are no longer a problem. Built using 3.2V 314Ah Grade A cells in a 1P16S configuration, managed by an intelligent 200A BMS and a JK 2A Active Balancer, this system delivers long life, stable performance, and peace of mind as standard. Key Features Fully AssembledFully assembled and ready to install straight out of the box. Integrated Fire SuppressionAutomatic heat-activated aerosol system provides rapid response protection inside the battery. Cold-Weather ReadyIntegrated battery heating allows charging down to -10°C.  Scalable & FlexibleConnect up to 16 units. That’s up to 257.6 kWh of storage. Reliable Performance6-year manufacturer’s warranty, backed by 10 years of Fogstar customer support. Long LifespanUp to 8000 cycles at 91% Depth of Discharge. Seamless IntegrationPre-loaded compatibility with Victron, Sunsynk, Solis, Luxpower, Voltacon and more. Smart ConnectivityCAN and RS485 communication for smooth system integration. User-Friendly InterfaceIntegrated LCD touchscreen for real-time monitoring and configuration. Advanced Cell ManagementAdvanced 200A BMS paired with a JK 2A Active Balancer for optimal cell health. Outstanding ValueJust £108.69 per kWh. Serious storage without the premium nonsense. Product SpecificationsModel: FE51.2V-16-LVFBRated Energy: 16.1kWhCell Assembly: 1P16SNominal Voltage (V): 51.2VOperating Voltage (V): 42V - 58.2VCycle Life: 8000 Cycles (at 25°C 50A charge and discharge current) at 91% DOD.Working Temperature: -10°C - 40°C Charge. -20°C - 40°C Discharge.Rated Charge/Discharge Current (A): 100A/200A @25±2℃Maximum Discharge Current: 200ACapacity: 314AhActive Balancer: JK 2AWeight: 119.5kg ± 3kgNominal Voltage: 51.2VSize: 898.5(H) x 415(L) x 260(W)Pre-loaded compatibility: Victron, Sunsynk, Solis, Luxpower, Voltacon and more. What's Included? 1.5 m 50 mm² battery cables with M8 ring lugs, suitable for direct inverter connection or via an external busbar 1.5 m communication cable for fast, hassle-free data integration. Installation note; always connect all negative conductors before attaching the positive.  The supplied cables work with most inverter setups. In some installations, routing via a busbar and using manufacturer-supplied inverter leads may be required.

Read more less