Quick Order

The BatteryProtect is not designed for reverse currents from charging sources. Features 12/24V auto ranging The BatteryProtect automatically detects system voltage. Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. Ignition proof No relays but MOSFET switches, and therefore no sparks. Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage. Brand Victron Energy Manufacturer Part Number BPR000065400 Voltage 12/24 Peak Current (During 30 Seconds) 250A Max. Continuous Load Current 65A Connection M6 IP Rating Electronics: IP67 (potted) Connections: IP00 Dimensions (Including Terminals) H40 x W48 x D106mm Weight (kg) 0.2 Warranty 5 Years

Read more less

Features Quality without compromise Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.   Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. The chargers also accept a 90-400 V DC supply.   Three outputs that each can supply the full output current Three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.   Three-stage charging, with temperature compensation The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. Brand Victron Energy Manufacturer Part Number CCH024030000 Voltage 24 Charger Amps 30 Outputs 3 Recommended Battery Capacity 120 – 300Ah Battery Connection M8 Studs IP Rating IP20 Dimensions H426 x W239 x D135mm Weight (kg) 5 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number CTR110000500 Weight (kg) 0.06 Warranty 5 Years

Read more less

Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models, and is especially useful in combination with the MultiPlus-II, as it does not have on-board terminals for Voltage- and Temperature sense wiring For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far Brand Victron Energy Manufacturer Part Number ASS030537010 Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number GSM900200100 Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number REC040010210R Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030064980 Cable Length 3m Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030065050 Cable Length 30m Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030065510

Read more less

Brand Victron Energy Manufacturer Part Number ASS030530203 Cable Length 0.3m Warranty 5 Years

Read more less

  Brand Victron Energy Manufacturer Part Number ASS030531209 Cable Length 0.9m Warranty 5 Years

Read more less

Brand Victron Energy Manufacturer Part Number ASS030531230 Cable Length 3m Warranty 5 Years

Read more less

Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.   Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC241331024 GTIN 8719076051589 Voltage 24V Charge Current 13A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years

Read more less

Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.   PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.   Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.   Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.   Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.   On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.   Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP242505010 GTIN 8719076052913 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H607 x W330 x D149mm Weight 30Kg Warranty 5 Years

Read more less

VE.Bus BMS V2 (BMS300200200) This Victron Product benefits from a 5 year warranty   Based on the status of the battery or batteries, the BMS will: Generate a pre-alarm signal to alert of an imminent cell under voltage condition. Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the ‘Load Disconnect’ terminal in the event of a cell under voltage condition. Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the ‘Charge Disconnect’ terminal in the event of a cell ove rvoltage, under temperature or over temperature condition. The “original” VE.Bus BMS is best used in systems without a GX device. The “next generation” VE.Bus BMS V2 has additional features such as: Remote on/off terminals. Ability to disable VE.Direct and VE.Can solar chargers via a GX device. Allowing control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device. Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.

Read more less

The Fastensol plastic tray can be extended using their mini 140mm rail. This allows panels of widths of up to 1140mm to be mounted in landscape configuration using these Fastensol trays.   Kit Includes: 1 x Fastensol Plastic Tray 4 x 140mm Mini Rail   This kit does not include: Fastensol aluminium End Clamp  (4 per tray) When fixing the 4x 140mm mini rails, you will need to drill additional holes on the side of the plastic trays. Please note that a lower ballast weight than the minimum weight on the datasheet can be used if stated by the ballast calculator

Read more less

Product description Sunsynk 3ph 10K Hybrid Inverter solar & wind Inverter #5: SYNK-10K-SG04LP3 The Sunsynk Three-Phase Hybrid Storage Inverters are highly efficient power management tools for three-phase grid applications. These inverters allow the user to control power flow from multiple sources such as solar, main electrical grids, and generators, and effectively store and deliver electric power to your applications.These amazing three-phase inverters have a unique feature. They can operate and balance the load, which means you can have 20% connected to one phase, 20% to another, and 60% to the third phase, and it still gives perfect phase rotation. No other inverter in their class can offer this feature.Max. AC Input Power 1100WMax. PV Input Power 13000WMax. AC Output Power 1100WBattery Discharge Power 10000WMax. Discharge Current 210AFrequency droop controlUp to 4 inverters in parallelInveractive displayRS485 Wi-Fi interface5 year warrantyProduct FeaturesDual MPPT designCompatible with most Lithium-ion batteries and Lead Acid batteriesMobile App for monitoringIP65 ratedAutomatic switching from Grid-Tied to Off-Grid modeZero export functionEssential and Non-Essential Loads outputsComes with the Wi-Fi logger and CTCompatible with SolarMan App for Monitoring Take complete control of your inverter by using the Sunsynk App. Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  

Read more less

Fastensol offer a splice / joiner for the H rail. System features and specifications: Dimensions: 3300 x 55 x 28 mm Suitable for pitched and flat roofs Material: aluminium Color: Natural

Read more less

Polar's Energy meter - to be paired with their ECO Hybrid Inverter and Polar 5.2kWh battery system.   System Overview Inverter Data Sheet Battery Data Sheet Inverter Installation Guide Battery Installation Guide SEE THE FULL INSTALLATION GUIDE ON YOU TUBE 

Read more less

Part No: SUN-HV-61.44 Storage Systems - Li-ion Battery Pack Sunsynk High Voltage 61.44kWh Complete Storage System Weight: 572 kg Battery Type: Lithium Ion Nominal Energy: 61440 Wh Depth of discharge: 100.00 % Voltage: 6144 V Continuous Discharge Rate (Normal Use): 61440 W Maximum Discharge Rate (5 Minutes): 61440 W Surge Discharge Rate (15 Seconds): 61440 W Maximum Charge Rate (5 Minutes): 61440 W

Read more less

Part No: FE-HV-EC-A-6-2.9-17.4 Storage Systems - Li-ion Battery Pack Fox ECS 2.9kWh CONNECTOR TYPE A - Stack of 6 (17.28kWh Useable Storage) Incl. Master ECM2900-4A2C 2.88kWh Capacity Scalable to 20.16kWh  90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage The quick & easy install feature allows for more ECM2900 battery modules to be added post installation. Weight: 196.7kg Dimensions (Width, Hight, Depth): 570mm x 830mm x 380mm Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves).   IMPORTANT REMINDER: When increasing the capacity of this battery stack, make sure the battery is the same connector type. We only stock the VERSION 2's of the ECS batteries. We stock both the Connector type A  and Connector type B variations. Weight: 213.95 kg Battery Type: Lithium Ion Nominal Energy: 17280 Wh Depth of discharge: 90.00 % Voltage: 345 V Continuous Discharge Rate (Normal Use): 17280 W Maximum Discharge Rate (5 Minutes): 17280 W Surge Discharge Rate (15 Seconds): 22464 W Maximum Charge Rate (5 Minutes): 17280 W

Read more less

Part No: FE-S1500 Inverters - Main Units Rating: 1,500W Phases: 1 FOX ESS - PV Inverter - S Series - 1.5kW S1500-G2 Don't forget: You must register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Supplier Part No: S1500 Weight: 5.4 kg Rated Power: 1,500 W Min PPT Voltage: 60 V Max PPT Voltage: 500 V DC Startup Voltage: 60 V DC Shutdown Voltage: 500 V Max Input Voltage: 500 V Max DC Power: 2,250 W Max AC Power (5 Minutes): 1,500 W Surge AC Power (1 Second): 1,650 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 1 Connector: MC4   Included Connectors: 1 Euro Efficiency: 96.5 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years

Read more less

CODE R-S12100A MPN (MANUFACTURER PART NUMBER) R-S12100A BRAND Topband Topband battery makes our products available through the best knowledge-based distribution and service organizations for the people and businesses who rely on batteries to work, live, or get away. Topband battery provides advanced LiFePO4 batteries for lead acid drop-in battery solution, light and compact drop-in replacement Features Optimal cost performance Standard design, mature and stable 3500+Cycle Life Support multiple series or parallel connections Low temperature operation - Can discharge at temperatures down to -20-65°C Energy density is twice that of lead-acid battery   Nominal Voltage 12.8V Battery Capacity 100Ah Recommended Charge Current 50A Recommended Discharge Current ≤50A Max Continuous Charge Current 100A Max Continuous Discharge Current 100A Cycle Life ≥3500 Dimensions L307 x W168 x H211mm Weight 11.8Kg Warranty 5 Years Battery Technology Lithium Battery Application Deep Cycle

Read more less

CODE TNE12-100 MPN (MANUFACTURER PART NUMBER) TNE12-100 Features Maintenance Free VRLA battery, no need to add water or acid during application. Longer cycle life: 400-600 cycles at 100%DOD. Higher capacity: Patented structure design with high utilization of active material, maximum improve the utilization rate of active material and the utilization ratio of battery internal space, 5%-10% higher capacity than similar products in the market. High performance for large current discharge. New structure for plate grid, greatly reduced resistance of the battery, uniform internal electrochemical reaction under large current discharge, excellent capacity recovery from deep discharge Good corrosion resistance of grid. Unique patent alloy with rare earth material, the grid has super corrosion resistance and creep resistance High performance under low temperature. With added conductive material and cryogenic expansion agent of high activity to the plate, the product is of strong accept ability under low temperature. Safety & reliability. Independent designed automatic anti-dry and removable safety valve for convenient common check as well as the sealing function to reduce water loss in the process of charge and discharge and to improve reaction efficiency of sealing. Application Electric Tricycle Low speed electric vehicles Golf trolleys and golf cart Patrol cars Electric Sight-seeing Tour Bus Sweeper Electric Wheelchairs Lawn mowers etc   Voltage 12V Battery Capacity (C20) 100Ah Terminal Type I3 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L260 x W168 x H210mm Weight 26Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM Battery Application Deep Cycle

Read more less

S2-1620GEL Rolls 2V OPzV GEL S Series Battery Dating back to 1959 Rolls Batteries is one of worlds leading lead-acid battery manufacturers based in Nova Scotia, Canada. Since 1959, the company has produced a wide range of Rolls-branded premium deep cycle batteries for use in Renewable Energy, Marine, Motive Power and Railroad applications. Rolls flooded and sealed AGM & GEL VRLA products are internationally recognised for their dependability, cycle life and outstanding quality. The Rolls GEL MODEL S Series Each is designed and manufactured according to DIN standards, constructed with die-casting positive grid and a patent formula of active material. Rolls GEL OPzV 2-volt models offers high cyclic use even under extreme operating conditions and more than 20 years floating design life at 25ºC / 77ºF. GEL FEATURES • Sealed maintenance-free construction • Tubular plate technology for high cyclic use and float applications • Durable ABS case • Low self-discharge (less than 2% per month) • Wide range of capacities & standard sizes   All Prices Include VAT Brand Rolls Voltage 2 Volts Technology Gel Capacity (C20) 1828 Ah Length 275 mm Width 210 mm Height inc. terms 824 mm Guarantee 2 Years    

Read more less

S2-1150GEL Rolls 2V OPzV GEL S Series Battery Dating back to 1959 Rolls Batteries is one of worlds leading lead-acid battery manufacturers based in Nova Scotia, Canada. Since 1959, the company has produced a wide range of Rolls-branded premium deep cycle batteries for use in Renewable Energy, Marine, Motive Power and Railroad applications. Rolls flooded and sealed AGM & GEL VRLA products are internationally recognised for their dependability, cycle life and outstanding quality. The Rolls GEL MODEL S Series Each is designed and manufactured according to DIN standards, constructed with die-casting positive grid and a patent formula of active material. Rolls GEL OPzV 2-volt models offers high cyclic use even under extreme operating conditions and more than 20 years floating design life at 25ºC / 77ºF. GEL FEATURES • Sealed maintenance-free construction • Tubular plate technology for high cyclic use and float applications • Durable ABS case • Low self-discharge (less than 2% per month) • Wide range of capacities & standard sizes   All Prices Include VAT Brand Rolls Voltage 2 Volts Technology Gel Capacity (C20) 1308 Ah Length 233 mm Width 210 mm Height inc. terms 673 mm Guarantee 2 Years    

Read more less

S12-160AGM Rolls 12V AGM-S Series Battery Based in Nova Scotia, Canada. Since 1959, the company has produced a wide range of Rolls-branded premium deep cycle batteries for use in Renewable Energy, Marine, Motive Power and Railroad applications. Rolls flooded and sealed AGM & GEL VRLA products are internationally recognised for their dependability, cycle life and outstanding quality. The Rolls AGM-S Series Rolls high quality AGM-S VRLA batteries offer true deep cycle performance, increased capacity and extended cycle life in a rugged, sealed, shock and vibration-resistant ABS case design for added durability, ideal for a variety of remote and confined off-grid, grid-tied and backup applications. AGM-S FEATURES • Sealed construction • New high-density active paste • Heavy duty thick plates • ABS case and cover • Superior corrosion resistance • Maintenance free, spill-proof/leak-proof • Self regulating pressure release valves • Low self discharge rate, only 3%/month • Faster recharging time   All Prices Include VAT Brand Rolls Voltage 12 Volts Technology AGM Capacity (C20) 145 Ah Length 341 mm Width 173 mm Height inc. terms 309 mm Guarantee 1 Year    

Read more less

The Full Throttle TPPL High Cranking Batteries are purpose-built to meet the ever-increasing demands of today's vehicles. With pure-lead cells and thin-plate technology, Full Throttle Batteries ensure a consistent and dependable power supply, even under the most demanding conditions.Full Throttle Batteries are incredibly versatile, catering to a wide range of vehicle applications, including cars, trucks, motorcycles, marine vessels, power sports vehicles, and emergency service vehicles. With their reputation for endurance, reliability, and longevity, Full Throttle batteries are built to withstand the test of time and the rigors of any environment.

Read more less

Brand CTEK Barcode (EAN) 7350009569156

Read more less

Supplier Code:32.0014P0001: Female cable coupler as individual part (including insulating part)   Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm² Rated current: 39 A (for 4 and 6mm2 cable) Please use correct MC4 approved tools to crimp these connectors on to bare cables.    Supplier Part No: 32.0014P0010-UR Weight: 0.01 kg

Read more less

The new, improved Firefighter's Safety Switch system from Santon is designed for automatic (remote/motorised) disconnection of the DC output from an installed array of PV modules. 40A 1000V 4P with 8 x MC4 connectors and 1 x M12 The Firefighter Safety Switch system can operate/disconnect a PV installation quickly, completely and remotely with one simple action at the control-panel interface, or even by remote actuation using the mobile phone network. By shutting off the installation, no DC power is conducted from the array through the property which results in a safe situation for firefighters to fight the fire and enter the building. This unit is 40A 1000V 4P and it is pre-wired with 8 x MC4 connectors and 1 x M12 cable gland for AC.    Supplier Part No: DFSHP-14-MC4 Weight: 2.5 kg

Read more less

String-Level Rapid Shutdown Device With 3~5 Strings Ensure the safety and reliability of your photovoltaic installations with the PEFS Rapid Shutdown. Specially designed as a critical safety device, this cutting-edge solution offers peace of mind in emergency situations. In the event of an emergency, such as a fire outbreak, the DC disconnect switch becomes your first line of defense. This switch is strategically engineered to swiftly disconnect connected strings of the installation, mitigating potential hazards and containing risks. Key Features: Enhanced safety for DC photovoltaic installations Swift disconnection of connected strings during emergencies Robust enclosure built to withstand dust and moisture (IP66) Automatic switch-off during AC power interruptions exceeding five seconds Automatic switch-on upon AC power restoration longer than five seconds   5 Years Warranty   Supplier Part No: PEFS-EL40H-10-P2 Weight: 4 kg Poles: 10 Max Cable: 10 mm2 Max Voltage: 1,500 V Rated Current: 40 A Rated Voltage:  1000 V Rated Current: 30 A Rated Voltage: 1200 V Rated Current: 20 A Rated Voltage: 1500 V

Read more less

The updated harmonised (H1Z2Z2-K) European standard solar cable is crafted for high-performance interconnections within photovoltaic (PV) systems, such as solar panel arrays. Engineered for durability and long-lasting reliability, this cable features an electron beam cross-linked sheathing, offering exceptional resistance to environmental stress. It is suitable for fixed installations in both indoor and outdoor environments, whether within conduits or systems (not for direct burial). Built to withstand the toughest conditions, this cable is AD8 water submersible, ensuring superior performance even in submerged environments. It is ozone-resistant in compliance with BS EN 50396, UV-resistant according to HD 605/A1, and rigorously tested for thermal endurance per EN 60216, guaranteeing a long service life. Additionally, the cable meets the Eca CPR rating from BASEC, underscoring its high-quality construction and safety standards.  

Read more less

Part No: SUN-CABLE-PACK Storage Systems - Accessory Inverter to Battery long cable pack.  Supplier Part No: Battery Cable Pack Long for Sunsynk Weight: 1 kg

Read more less

Part No: KG20B-T106D Switches - DC Isolators Kraus & Naimer DC Switch Switch - Disconnectors, 2 pole - for single string             IP66/67 Protection             Black/Grey Padlockable Handle – lockable in the OFF-position             Class II compliant, Grey Insulated Enclosure             Switch Interlocked with lid to prevent opening in “ON” position               Rated for use in ambient temperatures of 50°C Plastic Enclosures, Protection IP66/67, totally insulated, M20/M25 knock-outs Handle black, Plate Backing grey Contact development: 2 pole, 6 contacts per circuit (2 x 3 in series) Dimensions (w x h x d): 100mm x 178mm X 93mm Keywords: 9, 9kW, KG20BT106D, Kraus & Naimer, Switches, DC Isolator, DC ISOLATER, dc isolaters, isolaters UK Please note: We will have reduced availbility of K&N switch gear for the immediate future. We have sourced alternative options for this period of low stock, please contact your account manager for more information.   Supplier Part No:KG20B T106/D-P003 KL11V Weight:0.68 kg Rated Power:9,600 W Poles:2 Max Cable:6 mm2 Max Voltage:1,000 V Rated Current:21 A Rated Voltage:800 V Rated Current:20 A Rated Voltage:1000 V

Read more less

Part No: KG64-T203-GBA270 Switches - AC Isolators Kraus & Naimer AC Switch Suitable for single phase AC connection. Plastic enclosures, IP66/67 protection, totally insulated, 4x 20/25mm dual knock-outs Handle red with yellow backing plate, padlockable in the OFF position Dimensions (w x h x d): 100mm x 190mm x 93mm Switch interlocked with lid to prevent opening in ‘ON’ position Keywords: 14kW, KG64T203GBA270, Kraus & Naimer, Switches, AC Isolator   Supplier Part No:KG64 T203/GBA270 *KL1V Weight:0.625 kg Rated Power:14,720 W Poles:3 Max Cable:16 mm2 Max Voltage:230 V Rated Current:64 A Rated Voltage:230 V

Read more less

  AC Isolator Switch  4 Pole Enclosed 125A AC Switch Isolator  IP65 Protection Rating (enclosure) EN 60947-3 Compliant Multiple Gland Knockouts Lockable Rotary Handle Flame Retardant External Mounting Points Additional Earth Connection Interlocked Enclosure Lid Measurements H - 240 W - 160 D - 120 D including handle - 165   Supplier Part No:IS4P125 Weight:1.34 kg Rated Power:28,750 W Poles:4 Max Cable:35 mm2 Max Voltage:690 V Rated Current:125 A Rated Voltage:440 V Rated Current:125 A Rated Voltage:230 V

Read more less

Technical Data Applicational Data Material Dimensions Weight Compatible Thread length: 150/50 Hexagon socket 5 mm with building approval Z-14.4 - 555 Setscrew: M10 Clamping range: 80 - 130 mm pre-drilling necessary Stainless steel 8,4 x 206 mm 0,093 kg 420012, 420014, 420130, 420131, 900193, 900205 - 900222 REN900184, Renusol, PV Mounting, Roof Anchor- Hanger Bolt Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.   Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system. REN-900184

Read more less

Details We've created a Sunsynk inverter and battery kit to help you make an informed choice when selecting your inverter and battery for your solar panel system. Sunsynk is one of the world's best-known solar PV storage brands who are revolutionising the way we generate, use and store energy. Kit includes: Sunsynk 3.6kW AC 7kWp ECCO Hybrid Inverter Sunsynk 5.32KwH Battery Long Cable Pack SunSynk 3.6kW AC ECCO 7kWp Inverter  Looking for a reliable and flexible inverter for your solar energy system? Check out the Sunsynk 3.6kW ECCO Hybrid Inverter! This powerful inverter is capable of working with various types of batteries, including Lithium-ion and Lead Acid batteries. You can also rest assured that your investment is protected with a 5-year warranty as standard. With fully programmable power export, Sunsnyk inverter allows you to manage your power exports according to your needs. Additionally, the inverter is flexible and can be switched automatically from Grid-Tied to Off-Grid mode, making it a perfect solution for various energy needs. Need more power? No problem! Up to 16 units with the same firmware can be paralleled, making it easy to expand your system and meet your growing power needs. The Sunsnyk inverter is also suitable for outdoor installation, thanks to its IP65 rating. With a dual MPPT design and anti-islanding protection, the Sunsnyk 3.6kW ECCO Hybrid Inverter is a reliable and efficient choice for anyone looking to harness the power of the sun. And with the ability to handle up to 50kWh battery pack, it's perfect for both residential and commercial applications. Features: Suitable for various batteries - Compatible with Lithium-ion batteries and Lead Acid batteries Peace-of-mind - 5 year warranty as standard Manage your power exports - Fully programmable power export Flexible - Automatic switching from Grid-Tied to Off-Grid mode Expandable - Up to 16 units with the same firmware can be paralleled Dual MPPT design Up to 50kWh battery pack IP65 rated Anti-islanding protection   5.32KwH Battery Introducing the Sunsynk 5.32kWh Battery - a top-grade 5.32kWh lithium-ion phosphate battery flexible and reliable energy storage solution for your home or business. With a 100% depth of discharge (recommended 80%), you can make the most of your usable energy. Plus, the battery is scalable from 5.32 to 85.12 kWh, making it a flexible investment for your changing energy needs. Made with premium lithium ion phosphate (LFP) and engineered to the highest standards, this Sunsynk battery boasts a long lifespan of up to 6000 cycles, ensuring a safe and reliable source of power for years to come. Installation is a breeze, the BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward with the option to mount it on the floor or walls it weighs just 46.5kg. The Sunsynk 5.32kWh battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. It is also compatible with major PCS brands, ensuring perfect compatibility with your existing solar energy system. And with one button activation, you can easily turn it on and off with automatic ID assignment. The Sunsynk 5.32kWh Wall Mount Battery is one of the lightest in its class, weighing just 46.5kg!Features: Usable Energy - 100% depth of discharge (recommended 80%) Flexible Investment - Scalable from 5.32 to 85.12 kWh Safe & Reliable - Premium lithium ion phosphate (LFP) 6000 cycles Easy Installation - Floor stand or wall mounted Perfect Compatibility - Compatible with major PCS brand One Button Activation - ON / OFF automatic ID assignment

Read more less

Part No: LIFE-3.6-HYB02 Storage Systems - Hybrid Inverter Sunsynk LifeLynk X   

Read more less

Part No: UBIFLEX-B3-400X12 Mounting - Roof Flashings UBIFLEX NON-LEAD FLASHING BLACK 400mm x 12m   Why use lead? Use Ubiflex instead! No scrap value – no risk of theft. Saves time & money – up to 50% quicker to install than lead. No toxic risk – environmentally friendly and recyclable. 80% lighter than lead – less risk of injury. BRE wind tunnel tested, BBA Certified and approved by NHBC (B3 only). 25 year guarantee (B3 only).   Ubiflex Part No 534040   Supplier Part No: 534040 Weight: 18 kg

Read more less

The Clenergy PV-ezRack® SolarRoof™ Pro is a roof-mounting solution suitable for most types of residential pitched roofs. Using our innovative rail, Z module and roof hooks pre-assembled with our unique Cross connection clamp, SolarRoof™ Pro is one of the most versatile rooftop solution in the world, delivering a very fast, safe and cost-effective solution to installers The solution offers simple and fast installation, versatile application, compatible with all our PV panels and Clenergy does not compromise the product quality. Guidelines on mounting this roof anchor can be found on the document section. Clenergy mounting equipment must not be used with mounting equipment from other suppliers. Doing so would void the warranty of the mounting system.   Supplier Part No: ER-I-PRO/04 Weight: 0.558 kg PV Light: PRO-04

Read more less

Lucas Automotive was a Birmingham-based British company for many years and now is owned by an American corporation who famously founded Lucas Oil. Lucas is visually and verbally well known in the automotive world with their famously recognisable green and white boxes and labels. Lucas have been trading for over an impressive 140 years and are still going strong! The Lucas brand have gained the trust with mechanics worldwide for their continued quality of products and reliability. Lucas products are driven by engineering excellence and a spirit of innovation that's ensured the continued global success. Lucas have the title of having been trading longer than any other automotive component brand in the world. Lucas provide an extensive range of batteries for the automotive, commercial, leisure, motorcycle, mobility, telecoms and infrastructure industries. The Premium Automotive Battery range is known for excellent starting performance with calcium Technology which meets OE specifications. High quality specifications assured. With 99% of the industry vehicles covered by this market leading range, you can truly Trust Lucas. Maintenance Free 4 Year Warranty Terminals Brand Lucas Range Lucas Premium Voltage 12 Volts Technology Wet Capacity (C20) 95 Ah CCA (EN) 600 A Length 353 mm Width 175 mm Height inc. terms 190 mm Guarantee 4 Years Barcode (EAN) 5060196060412

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA ProMotive Heavy Duty Previously named as the ProMotive Black battery range. The ProMotive Heavy Duty battery range offers made-to-measure power output for older vehicles and those with lower energy requirements. Completely maintenance-free under normal usage conditions. Vibration-resistant design. High cyclic stability.  ProMotive Heavy Duty Key Benefits • Engineered in Germany • Patented PowerFrame grid for reliable starting power, fast recharge and corrosion resistance • Meets all criteria of the commercial vehicle manufacturers as original spare part • Ideal vibration resistance for agricultural and construction vehicles • Continuous multi start • Cranking and standard electric demands • The perfect choice for TCO savings (Total Cost of Ownership) Minimal Maintenance Other References 664, Varta DIN: 610 048 068 3 Year Warranty Terminals Brand Varta Voltage 12 Volts Technology Wet Capacity (C20) 110 Ah CCA (EN) 680 A Length 346 mm Width 172 mm Height inc. terms 239 mm Guarantee 3 Years Barcode (EAN) 4016987129074

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA ProMotive Heavy Duty Previously named as the ProMotive Black battery range. The ProMotive Heavy Duty battery range offers made-to-measure power output for older vehicles and those with lower energy requirements. Completely maintenance-free under normal usage conditions. Vibration-resistant design. High cyclic stability.  ProMotive Heavy Duty Key Benefits • Engineered in Germany • Patented PowerFrame grid for reliable starting power, fast recharge and corrosion resistance • Meets all criteria of the commercial vehicle manufacturers as original spare part • Ideal vibration resistance for agricultural and construction vehicles • Continuous multi start • Cranking and standard electric demands • The perfect choice for TCO savings (Total Cost of Ownership) Minimal Maintenance Other References 630, Varta DIN: 610 013 076 3 Year Warranty Terminals Brand Varta Voltage 12 Volts Technology Wet Capacity (C20) 110 Ah CCA (EN) 760 A Length 514 mm Width 175 mm Height inc. terms 210 mm Guarantee 3 Years Barcode (EAN) 4016987129050

Read more less

B33 VARTA Dynamic SLI Car Battery Innovation with Purpose, Premium Experience, Powerful History VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Dynamic SLI is made for vehicles with average power needs. Ideal for standard equipment and without start-stop technology. VARTA Dynamic SLI offers extra starting power and provides consistently high performance for longer periods of time. Thanks to the highest European engineering standards you´ll get the best of German engineering quality. The Dynamic SLI battery range benefits also from a 4 year guarantee! Dynamic SLI Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • For all cars with standard equipment • Recyclable and produced in an energy-saving way Maintenance Free Other References 155, Varta DIN: 545 157 033, Blue Dynamic 4 Year Warranty *Always cross reference dimensions and specifications to your existing battery or application before ordering. Terminals Brand Varta Product Code B33 ETN 545157033 Voltage 12 Volts Technology Wet Capacity (C20) 45 Ah CCA (EN) 330 A Length 238 mm Width 129 mm Height inc. terms 227 mm Other References 155 Weight 11.68 Kg Guarantee 4 Years Barcode (EAN) 4016987167540

Read more less

B34 VARTA Dynamic SLI Car Battery Innovation with Purpose, Premium Experience, Powerful History VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Dynamic SLI is made for vehicles with average power needs. Ideal for standard equipment and without start-stop technology. VARTA Dynamic SLI offers extra starting power and provides consistently high performance for longer periods of time. Thanks to the highest European engineering standards you´ll get the best of German engineering quality. The Dynamic SLI battery range benefits also from a 4 year guarantee! Dynamic SLI Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • For all cars with standard equipment • Recyclable and produced in an energy-saving way Maintenance Free Other References 049, 057, Varta DIN: 545 158 033, Blue Dynamic 4 Year Warranty *Always cross reference dimensions and specifications to your existing battery or application before ordering. Terminals Brand Varta Product Code B34 ETN 545158033 Voltage 12 Volts Technology Wet Capacity (C20) 45 Ah CCA (EN) 330 A Length 238 mm Width 129 mm Height inc. terms 227 mm Other References 043 Weight 11.68 Kg Guarantee 4 Years Barcode (EAN) 4016987167557  

Read more less

VARTA was founded in 1887 Germany, and was established fully in 1904 by delivering the first electric vehicle battery, famously driven by Thomas Edison. Soon after, VARTA delivers the first ever vehicle battery to provide safe night time driving with electric vehicle headlights! Today’s VARTA batteries have been providing renowned German advanced technology, powerful performance and exceptional service around the world for well over 100 years. VARTA Blue Dynamic is made for vehicles with average power needs. Ideal for standard equipment and without start-stop technology. The Blue Dynamic battery range benefits also from a 4 year guarantee! Blue Dynamic Key Benefits • Engineered to the highest German standards • Patented PowerFrame® grid for reliable starting power, fast recharge and corrosion resistance. • "Like-for-like" replacement of OE batteries (Original Equipment) • For all cars with standard equipment • Up to 25% higher starting power than Black • Available in 25 models of varying capacity, CCA and size • Recyclable and produced in an energy-saving way Maintenance Free Other References 096R, 086, Varta DIN: 574 013 068 4 Year Warranty Terminals Brand Varta Product Code E12 DIN 574 013 068 Range Varta Blue Voltage 12 Volts Technology Wet Capacity (C20) 74 Ah CCA (EN) 680 A Length 278 mm Width 175 mm Height inc. terms 190 mm Other References 574013068 Guarantee 4 Years Barcode (EAN) 4016987119549

Read more less